On Mon, Sep 07, 2020 at 03:42:07PM +0530, meenakshi.aggarwal@nxp.com wrote:
From: Meenakshi Aggarwal meenakshi.aggarwal@nxp.com
This patch add base support for LX2162AQDS board. LX2162AQDS board supports LX2162A family SoCs. This patch add basic support of platform.
Signed-off-by: Ioana Ciornei ioana.ciornei@nxp.com Signed-off-by: Zhao Qiang qiang.zhao@nxp.com Signed-off-by: hui.song hui.song_1@nxp.com Signed-off-by: Manish Tomar manish.tomar@nxp.com Signed-off-by: Vikas Singh vikas.singh@nxp.com Signed-off-by: Meenakshi Aggarwal meenakshi.aggarwal@nxp.com
arch/arm/Kconfig | 12 + arch/arm/dts/Makefile | 6 +- arch/arm/dts/fsl-lx2160a-qds.dts | 3 - arch/arm/dts/fsl-lx2160a-qds.dtsi | 22 +- arch/arm/dts/fsl-lx2162a-qds-17-x.dts | 17 + arch/arm/dts/fsl-lx2162a-qds-18-x.dts | 17 + arch/arm/dts/fsl-lx2162a-qds-20-x.dts | 17 + arch/arm/dts/fsl-lx2162a-qds-sd1-17.dtsi | 58 ++ arch/arm/dts/fsl-lx2162a-qds-sd1-18.dtsi | 61 ++ arch/arm/dts/fsl-lx2162a-qds-sd1-20.dtsi | 26 + arch/arm/dts/fsl-lx2162a-qds.dts | 34 +
Most of these new dts* files are not added to MAINTAINERS entries and it would be good to do so.
board/freescale/common/vid.c | 3 +- board/freescale/lx2160a/Kconfig | 16 + board/freescale/lx2160a/MAINTAINERS | 10 + board/freescale/lx2160a/Makefile | 1 + board/freescale/lx2160a/README | 132 ++++
This README also should get updated to rST and moved.
[snip]
+/*
- Need to override existing (lx2160a) with lx2162aqds so set_board_info will
- use proper prefix when creating full board_name (SYS_BOARD + type)
- */
+#undef CONFIG_SYS_BOARD +#define CONFIG_SYS_BOARD "lx2162aqds"
SYS_BOARD is under Kconfig, please just fix it there.
+#undef CONFIG_SYS_NXP_SRDS_3
+/* Qixis */ +#define QIXIS_XMAP_MASK 0x07
This is the start of adding tons of non-CONFIG information to the config header. Don't do this, it's going to make full migration to Kconfig harder. Please audit the whole file and anything that's not CONFIG_xxx needs to be somewhere else really. Thanks.