Newer AM437x silicon requires us to explicitly power up the USB2 PHY. By implementing usb_phy_power() we can achieve that.
Signed-off-by: Felipe Balbi balbi@ti.com ---
Changes since v1: - add macros for USB1_CTRL register and bits
arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 5 +++++ drivers/usb/phy/omap_usb_phy.c | 17 ++++++++++++++++- 2 files changed, 21 insertions(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h index 15399dc..b5875e3 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h +++ b/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h @@ -40,6 +40,11 @@ #define VTP0_CTRL_ADDR 0x44E10E0C #define VTP1_CTRL_ADDR 0x48140E10
+/* USB CTRL Base Address */ +#define USB1_CTRL 0x44e10628 +#define USB1_CTRL_CM_PWRDN BIT(0) +#define USB1_CTRL_OTG_PWRDN BIT(1) + /* DDR Base address */ #define DDR_PHY_CMD_ADDR 0x44E12000 #define DDR_PHY_DATA_ADDR 0x44E120C8 diff --git a/drivers/usb/phy/omap_usb_phy.c b/drivers/usb/phy/omap_usb_phy.c index af46db2..f78d532 100644 --- a/drivers/usb/phy/omap_usb_phy.c +++ b/drivers/usb/phy/omap_usb_phy.c @@ -222,7 +222,22 @@ static void am437x_enable_usb2_phy2(struct omap_xhci *omap)
void usb_phy_power(int on) { - return; + u32 val; + + /* USB1_CTRL */ + val = readl(USB1_CTRL); + if (on) { + /* + * these bits are re-used on AM437x to power up/down the USB + * CM and OTG PHYs, if we don't toggle them, USB will not be + * functional on newer silicon revisions + */ + val &= ~(USB1_CTRL_CM_PWRDN | USB1_CTRL_OTG_PWRDN); + } else { + val |= USB1_CTRL_CM_PWRDN | USB1_CTRL_OTG_PWRDN; + } + + writel(val, USB1_CTRL); } #endif /* CONFIG_AM437X_USB2PHY2_HOST */