This reads the kernel, ftd and boot into ubifs filesystem. While on that, the SD firmware filename definition has been moved next to the other SD related commands.
Signed-off-by: Otavio Salvador otavio@ossystems.com.br --- Changes in v2: None
include/configs/mx28evk.h | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 3de0599..6c9fa00 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -162,7 +162,6 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "update_nand_full_filename=u-boot.nand\0" \ "update_nand_firmware_filename=u-boot.sb\0" \ - "update_sd_firmware_filename=u-boot.sd\0" \ "update_nand_firmware_maxsz=0x100000\0" \ "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \ "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \ @@ -190,6 +189,23 @@ "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \ "nand write ${loadaddr} ${fw_off} ${filesize} ; " \ "fi\0" \ + "nandargs=setenv bootargs console=${console_mainline},${baudrate} " \ + "rootfstype=ubifs ubi.mtd=6 root=ubi0_0 ${mtdparts}\0" \ + "nandboot=" /* Boot from NAND */ \ + "mtdparts default; " \ + "run nandargs; " \ + "nand read ${loadaddr} kernel 0x00400000; " \ + "if test ${boot_fdt} = yes; then " \ + "nand read ${fdt_addr} fdt 0x00080000; " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = no; then " \ + "bootm; " \ + "else " \ + "echo "ERROR: Set boot_fdt to yes or no."; " \ + "fi; " \ + "fi\0" \ + "update_sd_firmware_filename=u-boot.sd\0" \ "update_sd_firmware=" /* Update the SD firmware partition */ \ "if mmc rescan ; then " \ "if tftp ${update_sd_firmware_filename} ; then " \