Hi Andreas,
On 11/13/2013 08:20 PM, Andreas Bießmann wrote:
Hi Bo,
On 11/06/2013 06:29 AM, Bo Shen wrote:
Correct the error define of DIV.
Signed-off-by: Bo Shen voice.shen@atmel.com
Changes in v3:
- None
Changes in v2:
- None
arch/arm/include/asm/arch-at91/at91_pmc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h index 003920c..ed5462c 100644 --- a/arch/arm/include/asm/arch-at91/at91_pmc.h +++ b/arch/arm/include/asm/arch-at91/at91_pmc.h @@ -124,8 +124,8 @@ typedef struct at91_pmc { #define AT91_PMC_MCKR_MDIV_MASK 0x00000300 #endif
-#define AT91_PMC_MCKR_PLLADIV_1 0x00001000 -#define AT91_PMC_MCKR_PLLADIV_2 0x00002000 +#define AT91_PMC_MCKR_PLLADIV_1 0x00000000 +#define AT91_PMC_MCKR_PLLADIV_2 0x00001000
this change will touch pm9261 board. I dunno if your change is correct for that board. I also wonder why one should set bit position 13 in MCKR ... I can't find any source what that bit could be. However mature documentation for sam9261 (which is the SoC on pm9261) doesn't name bit position 12 either.
So I'm fine with your change, but please fix the pm9261 board also (use the PLLADIV_2 define).
Ok, thanks.
#define AT91_PMC_IXR_MOSCS 0x00000001 #define AT91_PMC_IXR_LOCKA 0x00000002
Best regards
Andreas Bießmann
Best Regards, Bo Shen