Hi all
I have this sequence
U-Boot SPL 2020.04-5.4.70-2.3.2+g8991308b4b (May 12 2021 - 12:44:10 +0000) spl_init power_bd71837_init DDRINFO: start DRAM init DDRINFO: DRAM rate 1600MTS DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done
SPL: board_init_r()
Normal Boot Trying to boot from BOOTROM Find FIT header 0x&4403c1a0, size 1047 Need continue download 1024 fit read sector 4403c1a0, sectors=1048, dst=401ffb80, count=1048, size=0x418 firmware: 'uboot@1' External data: dst=40200000, offset=3000, size=a1010 fdt: 'fdt@1' External data: dst=402a1040, offset=a4010, size=6b20 loadables: 'atf@1' External data: dst=960000, offset=aab30, size=b1b0 loadables: 'tee@1' External data: dst=48000000, offset=b5ce0, size=203e70 no string for index 2 Download 2856176, total fit 2857808 fit read sector 4403c1a0, sectors=1048, dst=401ffb80, count=1048, size=0x418 firmware: 'uboot@1' External data: dst=40200000, offset=3000, size=a1010 fdt: 'fdt@1' External data: dst=402a1040, offset=a4010, size=6b20 loadables: 'atf@1' External data: dst=960000, offset=aab30, size=b1b0 loadables: 'tee@1' External data: dst=48000000, offset=b5ce0, size=203e70 no string for index 2 Jumping to U-Boot loaded - jumping to U-Boot... image entry point: 0x960000
I need to move some components to fit on 256Mb but I would like to know if I can get to atf and atf is running or not. During this time I need to use the same uart of the spl but I don't find any debug printing in the code (imx-atf). Can someone has some experience?
Michael