2017. 5. 17. 23:53에 "Simon Glass" sjg@chromium.org님이 작성:
This is not used anymore. Drop it.
Signed-off-by: Simon Glass sjg@chromium.org ---
drivers/mtd/nand/Makefile | 1 - drivers/mtd/nand/s3c2410_nand.c | 175 ------------------------------ ---------- 2 files changed, 176 deletions(-) delete mode 100644 drivers/mtd/nand/s3c2410_nand.c
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 82358f674b..5d5f9f5267 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -59,7 +59,6 @@ obj-$(CONFIG_NAND_MXC) += mxc_nand.o obj-$(CONFIG_NAND_MXS) += mxs_nand.o obj-$(CONFIG_NAND_NDFC) += ndfc.o obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o -obj-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o obj-$(CONFIG_NAND_SPEAR) += spr_nand.o obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nan d.c deleted file mode 100644 index dd742a6351..0000000000 --- a/drivers/mtd/nand/s3c2410_nand.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * (C) Copyright 2006 OpenMoko, Inc. - * Author: Harald Welte laforge@openmoko.org - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -#include <nand.h> -#include <asm/arch/s3c24x0_cpu.h> -#include <asm/io.h> - -#define S3C2410_NFCONF_EN (1<<15) -#define S3C2410_NFCONF_512BYTE (1<<14) -#define S3C2410_NFCONF_4STEP (1<<13) -#define S3C2410_NFCONF_INITECC (1<<12) -#define S3C2410_NFCONF_nFCE (1<<11) -#define S3C2410_NFCONF_TACLS(x) ((x)<<8) -#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) -#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) - -#define S3C2410_ADDR_NALE 4 -#define S3C2410_ADDR_NCLE 8 - -#ifdef CONFIG_NAND_SPL - -/* in the early stage of NAND flash booting, printf() is not available */ -#define printf(fmt, args...) - -static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) -{ - int i; - struct nand_chip *this = mtd_to_nand(mtd); - - for (i = 0; i < len; i++) - buf[i] = readb(this->IO_ADDR_R); -} -#endif - -static void s3c24x0_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - struct s3c24x0_nand *nand = s3c24x0_get_base_nand(); - - debug("hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl); - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong)nand; - - if (!(ctrl & NAND_CLE)) - IO_ADDR_W |= S3C2410_ADDR_NCLE; - if (!(ctrl & NAND_ALE)) - IO_ADDR_W |= S3C2410_ADDR_NALE; - - chip->IO_ADDR_W = (void *)IO_ADDR_W; - - if (ctrl & NAND_NCE) - writel(readl(&nand->nfconf) & ~S3C2410_NFCONF_nFCE, - &nand->nfconf); - else - writel(readl(&nand->nfconf) | S3C2410_NFCONF_nFCE, - &nand->nfconf); - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, chip->IO_ADDR_W); -} - -static int s3c24x0_dev_ready(struct mtd_info *mtd) -{ - struct s3c24x0_nand *nand = s3c24x0_get_base_nand(); - debug("dev_ready\n"); - return readl(&nand->nfstat) & 0x01; -} - -#ifdef CONFIG_S3C2410_NAND_HWECC -void s3c24x0_nand_enable_hwecc(struct mtd_info *mtd, int mode) -{ - struct s3c24x0_nand *nand = s3c24x0_get_base_nand(); - debug("s3c24x0_nand_enable_hwecc(%p, %d)\n", mtd, mode); - writel(readl(&nand->nfconf) | S3C2410_NFCONF_INITECC, &nand->nfconf); -} - -static int s3c24x0_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, - u_char *ecc_code) -{ - struct s3c24x0_nand *nand = s3c24x0_get_base_nand(); - ecc_code[0] = readb(&nand->nfecc); - ecc_code[1] = readb(&nand->nfecc + 1); - ecc_code[2] = readb(&nand->nfecc + 2); - debug("s3c24x0_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n", - mtd , ecc_code[0], ecc_code[1], ecc_code[2]); - - return 0; -} - -static int s3c24x0_nand_correct_data(struct mtd_info *mtd, u_char *dat, - u_char *read_ecc, u_char *calc_ecc) -{ - if (read_ecc[0] == calc_ecc[0] && - read_ecc[1] == calc_ecc[1] && - read_ecc[2] == calc_ecc[2]) - return 0; - - printf("s3c24x0_nand_correct_data: not implemented\n"); - return -EBADMSG; -} -#endif - -int board_nand_init(struct nand_chip *nand) -{ - u_int32_t cfg; - u_int8_t tacls, twrph0, twrph1; - struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - struct s3c24x0_nand *nand_reg = s3c24x0_get_base_nand(); - - debug("board_nand_init()\n"); - - writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon); - - /* initialize hardware */ -#if defined(CONFIG_S3C24XX_CUSTOM_NAND_TIMING) - tacls = CONFIG_S3C24XX_TACLS; - twrph0 = CONFIG_S3C24XX_TWRPH0; - twrph1 = CONFIG_S3C24XX_TWRPH1; -#else - tacls = 4; - twrph0 = 8; - twrph1 = 8; -#endif - - cfg = S3C2410_NFCONF_EN; - cfg |= S3C2410_NFCONF_TACLS(tacls - 1); - cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1); - cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1); - writel(cfg, &nand_reg->nfconf); - - /* initialize nand_chip data structure */ - nand->IO_ADDR_R = (void *)&nand_reg->nfdata; - nand->IO_ADDR_W = (void *)&nand_reg->nfdata; - - nand->select_chip = NULL; - - /* read_buf and write_buf are default */ - /* read_byte and write_byte are default */ -#ifdef CONFIG_NAND_SPL - nand->read_buf = nand_read_buf; -#endif - - /* hwcontrol always must be implemented */ - nand->cmd_ctrl = s3c24x0_hwcontrol; - - nand->dev_ready = s3c24x0_dev_ready; - -#ifdef CONFIG_S3C2410_NAND_HWECC - nand->ecc.hwctl = s3c24x0_nand_enable_hwecc; - nand->ecc.calculate = s3c24x0_nand_calculate_ecc; - nand->ecc.correct = s3c24x0_nand_correct_data; - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; - nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; - nand->ecc.strength = 1; -#else - nand->ecc.mode = NAND_ECC_SOFT; -#endif - -#ifdef CONFIG_S3C2410_NAND_BBT - nand->bbt_options |= NAND_BBT_USE_FLASH; -#endif - - debug("end of nand_init\n"); - - return 0; -} -- 2.13.0.303.g4ebf302169-goog
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Acked-by: Minkyu Kang mk7.kang@samsung.com
Thanks, Minkyu Kang