For now, this only provides reset and poweroff functions.
Signed-off-by: Michael Walle michael@walle.cc --- board/kontron/sl28/Makefile | 2 ++ board/kontron/sl28/psci.c | 42 ++++++++++++++++++++++++++++++++++ configs/kontron_sl28_defconfig | 2 ++ 3 files changed, 46 insertions(+) create mode 100644 board/kontron/sl28/psci.c
diff --git a/board/kontron/sl28/Makefile b/board/kontron/sl28/Makefile index 5d220f0744..084c11da37 100644 --- a/board/kontron/sl28/Makefile +++ b/board/kontron/sl28/Makefile @@ -6,6 +6,8 @@ endif
obj-y += common.o ddr.o
+obj-$(CONFIG_ARMV8_PSCI) += psci.o + ifdef CONFIG_SPL_BUILD obj-y += spl.o obj-$(CONFIG_SPL_ATF) += spl_atf.o diff --git a/board/kontron/sl28/psci.c b/board/kontron/sl28/psci.c new file mode 100644 index 0000000000..19f0ef3b6d --- /dev/null +++ b/board/kontron/sl28/psci.c @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <asm/secure.h> +#include <asm/psci.h> +#include <asm/types.h> +#include <asm/io.h> +#include <asm/system.h> + +#define GPIO2_GPDIR 0x2310000 +#define GPIO2_GPDAT 0x2310008 +#define RSTCR 0x1e60000 +#define RESET_REQ BIT(1) + +u32 __secure psci_version(void) +{ + return ARM_PSCI_VER_0_2; +} + +void __secure psci_system_reset(void) +{ + writel(RESET_REQ, RSTCR); + + while (1) + wfi(); +} + +void __secure psci_system_off(void) +{ + int i; + + writel(0x02000000, GPIO2_GPDIR); + writel(0, GPIO2_GPDAT); + + /* make sure the management controller has sampled the input */ + for (i = 0; i < (1 << 11); i++) + asm("nop"); + + writel(RESET_REQ, RSTCR); + + while (1) + wfi(); +} diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig index cf8aedfdfd..260d99af15 100644 --- a/configs/kontron_sl28_defconfig +++ b/configs/kontron_sl28_defconfig @@ -19,6 +19,8 @@ CONFIG_ENV_OFFSET_REDUND=0x3f0000 CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y # CONFIG_PSCI_RESET is not set +CONFIG_ARMV8_PSCI=y +CONFIG_ARMV8_PSCI_RELOCATE=y CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x82000000