
Hello Ismael,
Am 06.03.2019 um 11:46 schrieb Ismael Luceno Cortes:
Cosmetic change. Any call to the recover function would need to do the same check afterwards, so it's sensible to make it part of the function.
Signed-off-by: Ismael Luceno ismael.luceno@silicon-gears.com
drivers/i2c/rcar_i2c.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/rcar_i2c.c b/drivers/i2c/rcar_i2c.c index 78ef8acacc..8fe0aadffa 100644 --- a/drivers/i2c/rcar_i2c.c +++ b/drivers/i2c/rcar_i2c.c @@ -81,12 +81,13 @@ static int rcar_i2c_finish(struct udevice *dev) return ret; }
-static void rcar_i2c_recover(struct udevice *dev) +static int rcar_i2c_recover(struct udevice *dev) { struct rcar_i2c_priv *priv = dev_get_priv(dev); u32 mcr = RCAR_I2C_ICMCR_MDBS | RCAR_I2C_ICMCR_OBPC; u32 mcra = mcr | RCAR_I2C_ICMCR_FSDA; int i;
u32 mstat;
/* Send 9 SCL pulses */ for (i = 0; i < 9; i++) {
@@ -106,6 +107,9 @@ static void rcar_i2c_recover(struct udevice *dev) udelay(5); writel(mcra | RCAR_I2C_ICMCR_FSCL, priv->base + RCAR_I2C_ICMCR); udelay(5);
mstat = readl(priv->base + RCAR_I2C_ICMSR);
return mstat & RCAR_I2C_ICMCR_FSDA ? -EBUSY : 0; }
static int rcar_i2c_set_addr(struct udevice *dev, u8 chip, u8 read)
@@ -125,9 +129,7 @@ static int rcar_i2c_set_addr(struct udevice *dev, u8 chip, u8 read) ret = wait_for_bit_le32(priv->base + RCAR_I2C_ICMCR, RCAR_I2C_ICMCR_FSDA, false, 2, true); if (ret) {
rcar_i2c_recover(dev);
val = readl(priv->base + RCAR_I2C_ICMSR);
if (val & RCAR_I2C_ICMCR_FSDA) {
}if (rcar_i2c_recover(dev)) { dev_err(dev, "Bus busy, aborting\n"); return ret;
This change brings travis build to fail, see:
https://travis-ci.org/hsdenx/u-boot-i2c/jobs/502984991#L1265
On which hardware have you tested this patchset?
The fix is easy:
$ git diff diff --git a/drivers/i2c/rcar_i2c.c b/drivers/i2c/rcar_i2c.c index 8fe0aadffa..2ebae349ed 100644 --- a/drivers/i2c/rcar_i2c.c +++ b/drivers/i2c/rcar_i2c.c @@ -117,7 +117,6 @@ static int rcar_i2c_set_addr(struct udevice *dev, u8 chip, u8 read) struct rcar_i2c_priv *priv = dev_get_priv(dev); u32 mask = RCAR_I2C_ICMSR_MAT | (read ? RCAR_I2C_ICMSR_MDR : RCAR_I2C_ICMSR_MDE); - u32 val; int ret;
writel(0, priv->base + RCAR_I2C_ICMIER); $
but I am unsure if you ever tested the changes...
So, please, send a v4, Thanks!
bye, Heiko