On 2022/8/26 23:36, Quentin Schulz wrote:
From: Quentin Schulz quentin.schulz@theobroma-systems.com
idbloader.img content - currently created by way of Makefile - can be created by binman directly.
So let's do that for Rockchip ARM platforms.
Cc: Quentin Schulz foss+uboot@0leil.net Reviewed-by: Simon Glass sjg@chromium.org Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
v4:
- added Reviewed-by,
v3:
- moved spl back into mkimage section,
- added filename property so that the idbloader.img binary is still
generated, Makefile | 2 +- arch/arm/dts/rockchip-u-boot.dtsi | 11 ++++++++++- 2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/Makefile b/Makefile index 5750a9e4b8..dbe1aa254a 100644 --- a/Makefile +++ b/Makefile @@ -1011,7 +1011,7 @@ endif else ifeq ($(CONFIG_SPL),y) # Generate these inputs for binman which will create the output files -INPUTS-y += idbloader.img u-boot.img +INPUTS-y += u-boot.img endif endif endif diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi index eae3ee715d..ad72ca9700 100644 --- a/arch/arm/dts/rockchip-u-boot.dtsi +++ b/arch/arm/dts/rockchip-u-boot.dtsi @@ -17,8 +17,17 @@ filename = "u-boot-rockchip.bin"; pad-byte = <0xff>;
blob {
mkimage { filename = "idbloader.img";args = "-n", CONFIG_SYS_SOC, "-T", "rksd";+#ifdef CONFIG_TPL
multiple-data-files;u-boot-tpl {};+#endif
u-boot-spl {};};
u-boot-img {