Add Starfive JH7110 PCIe 2.0 PHY driver, which is generic PHY driver and can be used as USB 3.0 driver.
Signed-off-by: Minda Chen minda.chen@starfivetech.com --- drivers/phy/starfive/Kconfig | 7 + drivers/phy/starfive/Makefile | 1 + drivers/phy/starfive/phy-jh7110-pcie.c | 239 +++++++++++++++++++++++++ 3 files changed, 247 insertions(+) create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig index a7cf0a55dff..d11338ed484 100644 --- a/drivers/phy/starfive/Kconfig +++ b/drivers/phy/starfive/Kconfig @@ -4,6 +4,13 @@
menu "Starfive PHY driver"
+config PHY_STARFIVE_JH7110_PCIE + bool "Starfive JH7110 PCIe 2.0 PHY driver" + depends on PHY + help + Enable this to support the Starfive JH7110 PCIE 2.0/USB 3.0 PHY. + Generic PHY driver JH7110 USB 3.0/ PCIe 2.0. + config PHY_STARFIVE_JH7110_USB2 bool "Starfive JH7110 USB 2.0 PHY driver" depends on PHY diff --git a/drivers/phy/starfive/Makefile b/drivers/phy/starfive/Makefile index a405a75e34c..82f25aa21b7 100644 --- a/drivers/phy/starfive/Makefile +++ b/drivers/phy/starfive/Makefile @@ -3,4 +3,5 @@ # Copyright (C) 2023 Starfive #
+obj-$(CONFIG_PHY_STARFIVE_JH7110_PCIE) += phy-jh7110-pcie.o obj-$(CONFIG_PHY_STARFIVE_JH7110_USB2) += phy-jh7110-usb2.o diff --git a/drivers/phy/starfive/phy-jh7110-pcie.c b/drivers/phy/starfive/phy-jh7110-pcie.c new file mode 100644 index 00000000000..ecb04bdedfa --- /dev/null +++ b/drivers/phy/starfive/phy-jh7110-pcie.c @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * StarFive JH7110 PCIe 2.0 PHY driver + * + * Copyright (C) 2024 StarFive Technology Co., Ltd. + * Author: Minda Chen minda.chen@starfivetech.com + */ +#include <asm/io.h> +#include <dm.h> +#include <dm/device_compat.h> +#include <errno.h> +#include <generic-phy.h> +#include <regmap.h> +#include <soc.h> +#include <syscon.h> +#include <linux/bitops.h> +#include <linux/err.h> + +#include "phy-jh7110-usb-syscon.h" + +#define PCIE_KVCO_LEVEL_OFF 0x28 +#define PCIE_USB3_PHY_PLL_CTL_OFF 0x7c +#define PCIE_USB3_PHY_SS_MODE BIT(4) +#define PCIE_KVCO_TUNE_SIGNAL_OFF 0x80 +#define PHY_KVCO_FINE_TUNE_LEVEL 0x91 +#define PHY_KVCO_FINE_TUNE_SIGNALS 0xc + +#define PCIE_USB3_PHY_MODE 0x1 +#define PCIE_BUS_WIDTH 0x2 +#define PCIE_USB3_PHY_ENABLE 0x1 +#define PCIE_USB3_PHY_SPLIT 0x1 + +struct jh7110_pcie_phy { + struct phy *phy; + struct regmap *stg_syscon; + struct regmap *sys_syscon; + void __iomem *regs; + struct regmap_field *phy_mode; + struct regmap_field *bus_width; + struct regmap_field *usb3_phy_en; + struct regmap_field *usb_split; + enum phy_mode mode; +}; + +static int phy_pcie_mode_set(struct jh7110_pcie_phy *data, bool usb_mode) +{ + unsigned int phy_mode, width, usb3_phy, ss_mode, split; + + /* default is PCIe mode */ + if (!data->stg_syscon || !data->sys_syscon) { + if (usb_mode) { + dev_err(data->phy->dev, "doesn't support USB3 mode\n"); + return -EINVAL; + } + return 0; + } + + if (usb_mode) { + phy_mode = PCIE_USB3_PHY_MODE; + width = 0; + usb3_phy = PCIE_USB3_PHY_ENABLE; + ss_mode = PCIE_USB3_PHY_SS_MODE; + split = 0; + } else { + phy_mode = 0; + width = PCIE_BUS_WIDTH; + usb3_phy = 0; + ss_mode = 0; + split = PCIE_USB3_PHY_SPLIT; + } + + regmap_field_write(data->phy_mode, phy_mode); + regmap_field_write(data->bus_width, width); + regmap_field_write(data->usb3_phy_en, usb3_phy); + clrsetbits_le32(data->regs + PCIE_USB3_PHY_PLL_CTL_OFF, + PCIE_USB3_PHY_SS_MODE, ss_mode); + regmap_field_write(data->usb_split, split); + + return 0; +} + +static void phy_kvco_gain_set(struct jh7110_pcie_phy *phy) +{ + /* PCIe Multi-PHY PLL KVCO Gain fine tune settings: */ + writel(PHY_KVCO_FINE_TUNE_LEVEL, phy->regs + PCIE_KVCO_LEVEL_OFF); + writel(PHY_KVCO_FINE_TUNE_SIGNALS, phy->regs + PCIE_KVCO_TUNE_SIGNAL_OFF); +} + +static int jh7110_pcie_phy_set_mode(struct phy *phy, + enum phy_mode mode, int submode) +{ + struct udevice *dev = phy->dev; + struct jh7110_pcie_phy *pcie_phy = dev_get_priv(dev); + int ret; + + if (mode == pcie_phy->mode) + return 0; + + switch (mode) { + case PHY_MODE_USB_HOST: + case PHY_MODE_USB_DEVICE: + case PHY_MODE_USB_OTG: + ret = phy_pcie_mode_set(pcie_phy, 1); + if (ret) + return ret; + break; + case PHY_MODE_PCIE: + phy_pcie_mode_set(pcie_phy, 0); + break; + default: + return -EINVAL; + } + + dev_dbg(phy->dev, "Changing PHY mode to %d\n", mode); + pcie_phy->mode = mode; + + return 0; +} + +static const struct phy_ops jh7110_pcie_phy_ops = { + .set_mode = jh7110_pcie_phy_set_mode, +}; + +static int phy_stg_regfield_init(struct udevice *dev, int mode, int usb3) +{ + struct jh7110_pcie_phy *phy = dev_get_priv(dev); + struct reg_field phy_mode = REG_FIELD(mode, 20, 21); + struct reg_field bus_width = REG_FIELD(usb3, 2, 3); + struct reg_field usb3_phy_en = REG_FIELD(usb3, 4, 4); + + phy->phy_mode = devm_regmap_field_alloc(dev, phy->stg_syscon, phy_mode); + if (IS_ERR(phy->phy_mode)) { + dev_err(dev, "PHY mode reg field init failed\n"); + return PTR_ERR(phy->phy_mode); + } + + phy->bus_width = devm_regmap_field_alloc(dev, phy->stg_syscon, bus_width); + if (IS_ERR(phy->bus_width)) { + dev_err(dev, "PHY bus width reg field init failed\n"); + return PTR_ERR(phy->bus_width); + } + + phy->usb3_phy_en = devm_regmap_field_alloc(dev, phy->stg_syscon, usb3_phy_en); + if (IS_ERR(phy->usb3_phy_en)) { + dev_err(dev, "USB3 PHY enable field init failed\n"); + return PTR_ERR(phy->bus_width); + } + + return 0; +} + +static int phy_sys_regfield_init(struct udevice *dev, int split) +{ + struct jh7110_pcie_phy *phy = dev_get_priv(dev); + struct reg_field usb_split = REG_FIELD(split, USB_PDRSTN_SPLIT_BIT, USB_PDRSTN_SPLIT_BIT); + + phy->usb_split = devm_regmap_field_alloc(dev, phy->sys_syscon, usb_split); + if (IS_ERR(phy->usb_split)) { + dev_err(dev, "USB split field init failed\n"); + return PTR_ERR(phy->usb_split); + } + + return 0; +} + +static int starfive_pcie_phy_get_syscon(struct udevice *dev) +{ + struct jh7110_pcie_phy *phy = dev_get_priv(dev); + struct ofnode_phandle_args sys_phandle, stg_phandle; + int ret; + + /* get corresponding syscon phandle */ + ret = dev_read_phandle_with_args(dev, "starfive,sys-syscon", NULL, 0, 0, + &sys_phandle); + + if (ret < 0) { + dev_err(dev, "Can't get sys cfg phandle: %d\n", ret); + return ret; + } + + ret = dev_read_phandle_with_args(dev, "starfive,stg-syscon", NULL, 2, 0, + &stg_phandle); + + if (ret < 0) { + dev_err(dev, "Can't get stg cfg phandle: %d\n", ret); + return ret; + } + + phy->sys_syscon = syscon_node_to_regmap(sys_phandle.node); + /* get syscon register offset */ + if (!IS_ERR(phy->sys_syscon)) { + ret = phy_sys_regfield_init(dev, SYSCON_USB_PDRSTN_REG_OFFSET); + if (ret) + return ret; + } else { + phy->sys_syscon = NULL; + } + + phy->stg_syscon = syscon_node_to_regmap(stg_phandle.node); + if (!IS_ERR(phy->stg_syscon)) + return phy_stg_regfield_init(dev, stg_phandle.args[0], + stg_phandle.args[1]); + else + phy->stg_syscon = NULL; + + return 0; +} + +int jh7110_pcie_phy_probe(struct udevice *dev) +{ + struct jh7110_pcie_phy *phy = dev_get_priv(dev); + int rc; + + phy->regs = dev_read_addr_ptr(dev); + if (!phy->regs) + return -EINVAL; + + rc = starfive_pcie_phy_get_syscon(dev); + if (rc) + return rc; + + phy_kvco_gain_set(phy); + + return 0; +} + +static const struct udevice_id jh7110_pcie_phy[] = { + { .compatible = "starfive,jh7110-pcie-phy"}, + {}, +}; + +U_BOOT_DRIVER(jh7110_pcie_phy) = { + .name = "jh7110_pcie_phy", + .id = UCLASS_PHY, + .of_match = jh7110_pcie_phy, + .probe = jh7110_pcie_phy_probe, + .ops = &jh7110_pcie_phy_ops, + .priv_auto = sizeof(struct jh7110_pcie_phy), +};