It seems rockpro64-rk3399 and pinebook-pro-rk3399 fail to boot when usb is started. It hangs indefinitely at:
## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000
I have observed this also using 2020.10 on rockpro64-rk3399, though on pinebook-pro-rk3399 usb does not work and so it basically avoids triggering the issue.
Setting CONFIG_USE_PREBOOT=n in the config works around the problem, though obviously by breaking usb keyboard support or booting from USB devices.
Related bugs in Debian and manjaro:
https://bugs.debian.org/973323 https://bugs.debian.org/980434 https://gitlab.manjaro.org/manjaro-arm/packages/core/uboot-rockpro64/-/issue...
Boot log:
U-Boot 2021.01+dfsg-1 (Jan 17 2021 - 03:50:13 +0000)
SoC: Rockchip rk3399 Reset cause: POR Model: Pine64 RockPro64 v2.1 DRAM: 3.9 GiB PMIC: RK808 MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0 Loading Environment from SPIFlash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Model: Pine64 RockPro64 v2.1 Net: eth0: ethernet@fe300000 starting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3a0000: USB OHCI 1.0 Bus usb@fe3c0000: USB EHCI 1.00 Bus usb@fe3e0000: USB OHCI 1.0 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 => printenv preboot preboot=usb start => usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3a0000: USB OHCI 1.0 Bus usb@fe3c0000: USB EHCI 1.00 Bus usb@fe3e0000: USB OHCI 1.0 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3a0000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found => boot Card did not respond to voltage select! : -110 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 144 bytes read in 5 ms (27.3 KiB/s) 1: Debian-Installer Retrieving file: /initrd.gz 28995285 bytes read in 1287 ms (21.5 MiB/s) Retrieving file: /vmlinuz 26922864 bytes read in 1195 ms (21.5 MiB/s) Retrieving file: /dtbs/rockchip/rk3399-rockpro64.dtb 56849 bytes read in 13 ms (4.2 MiB/s) Moving Image from 0x2080000 to 0x2200000, end=3c50000 ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000
live well, vagrant