When video is set up in SPL, U-Boot proper needs to use the correct parameters so it can write to the display.
Put these in a bloblist so they are available to U-Boot proper.
Signed-off-by: Simon Glass sjg@chromium.org ---
drivers/pci/pci_rom.c | 78 +++++++++++++++++++++++++++++++------------ include/bloblist.h | 1 + include/video.h | 24 +++++++++++++ 3 files changed, 82 insertions(+), 21 deletions(-)
diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c index 2d9a2a899ef7..ecb6da64c5c9 100644 --- a/drivers/pci/pci_rom.c +++ b/drivers/pci/pci_rom.c @@ -26,6 +26,7 @@
#include <common.h> #include <bios_emul.h> +#include <bloblist.h> #include <bootstage.h> #include <dm.h> #include <errno.h> @@ -34,6 +35,7 @@ #include <malloc.h> #include <pci.h> #include <pci_rom.h> +#include <spl.h> #include <vesa.h> #include <video.h> #include <acpi/acpi_s3.h> @@ -420,34 +422,68 @@ int vesa_setup_video(struct udevice *dev, int (*int15_handler)(void)) printf("Not available (previous bootloader prevents it)\n"); return -EPERM; } - bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display"); - ret = dm_pci_run_vga_bios(dev, int15_handler, PCI_ROM_USE_NATIVE | - PCI_ROM_ALLOW_FALLBACK); - bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD); - if (ret) { - debug("failed to run video BIOS: %d\n", ret); - return ret; - }
- ret = vesa_setup_video_priv(&mode_info.vesa, - mode_info.vesa.phys_base_ptr, uc_priv, - plat); - if (ret) { - if (ret == -ENFILE) { - /* - * See video-uclass.c for how to set up reserved memory - * in your video driver - */ - log_err("CONFIG_VIDEO_COPY enabled but driver '%s' set up no reserved memory\n", - dev->driver->name); + /* In U-Boot proper, collect the information added by SPL (see below) */ + if (IS_ENABLED(CONFIG_SPL_VIDEO) && spl_phase() > PHASE_SPL && + CONFIG_IS_ENABLED(BLOBLIST)) { + struct video_handoff *ho; + + ho = bloblist_find(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho)); + if (!ho) + return log_msg_ret("blf", -ENOENT); + plat->base = ho->fb; + plat->size = ho->size; + uc_priv->xsize = ho->xsize; + uc_priv->ysize = ho->ysize; + uc_priv->line_length = ho->line_length; + uc_priv->bpix = ho->bpix; + } else { + bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display"); + ret = dm_pci_run_vga_bios(dev, int15_handler, + PCI_ROM_USE_NATIVE | + PCI_ROM_ALLOW_FALLBACK); + bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD); + if (ret) { + debug("failed to run video BIOS: %d\n", ret); + return ret; }
- debug("No video mode configured\n"); - return ret; + ret = vesa_setup_video_priv(&mode_info.vesa, + mode_info.vesa.phys_base_ptr, + uc_priv, plat); + if (ret) { + if (ret == -ENFILE) { + /* + * See video-uclass.c for how to set up reserved + * memory in your video driver + */ + log_err("CONFIG_VIDEO_COPY enabled but driver '%s' set up no reserved memory\n", + dev->driver->name); + } + + debug("No video mode configured\n"); + return ret; + } }
printf("Video: %dx%dx%d\n", uc_priv->xsize, uc_priv->ysize, mode_info.vesa.bits_per_pixel);
+ /* In SPL, store the information for use by U-Boot proper */ + if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) { + struct video_handoff *ho; + + ho = bloblist_add(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho), 0); + if (!ho) + return log_msg_ret("blc", -ENOMEM); + + ho->fb = plat->base; + ho->size = plat->size; + ho->xsize = uc_priv->xsize; + ho->ysize = uc_priv->ysize; + ho->line_length = uc_priv->line_length; + ho->bpix = uc_priv->bpix; + } + return 0; } diff --git a/include/bloblist.h b/include/bloblist.h index 2a2f1700eb09..7ea72c6bd46d 100644 --- a/include/bloblist.h +++ b/include/bloblist.h @@ -113,6 +113,7 @@ enum bloblist_tag_t { BLOBLISTT_PROJECT_AREA = 0x8000, BLOBLISTT_U_BOOT_SPL_HANDOFF = 0x8000, /* Hand-off info from SPL */ BLOBLISTT_VBE = 0x8001, /* VBE per-phase state */ + BLOBLISTT_U_BOOT_VIDEO = 0x8002, /* Video information from SPL */
/* * Vendor-specific tags are permitted here. Projects can be open source diff --git a/include/video.h b/include/video.h index 4d99e5dc27f6..795a7378535e 100644 --- a/include/video.h +++ b/include/video.h @@ -133,6 +133,30 @@ struct video_ops {
#define video_get_ops(dev) ((struct video_ops *)(dev)->driver->ops)
+/** + * struct video_handoff - video information passed from SPL + * + * This is used when video is set up by SPL, to provide the details to U-Boot + * proper. + * + * @fb: Base address of frame buffer, 0 if not yet known + * @size: Frame-buffer size, in bytes + * @xsize: Number of pixel columns (e.g. 1366) + * @ysize: Number of pixels rows (e.g.. 768) + * @line_length: Length of each frame buffer line, in bytes. This can be + * set by the driver, but if not, the uclass will set it after + * probing + * @bpix: Encoded bits per pixel (enum video_log2_bpp) + */ +struct video_handoff { + u64 fb; + u32 size; + ushort xsize; + ushort ysize; + u32 line_length; + u8 bpix; +}; + /** enum colour_idx - the 16 colors supported by consoles */ enum colour_idx { VID_BLACK = 0,