On Fri, 17 Dec 2021 09:37:08 -0700 Simon Glass sjg@chromium.org wrote:
Hi Simon,
On Sun, 12 Dec 2021 at 18:03, Andre Przywara andre.przywara@arm.com wrote:
Add some long overdue instructions for building and installing U-Boot on Allwinner SoC based boards. This describes the building process, including TF-A and crust, plus installation to SD card, eMMC and SPI flash, both from Linux and U-Boot itself. Also describe FEL booting.
Signed-off-by: Andre Przywara andre.przywara@arm.com
Hi,
please have a look whether this makes sense. Feel free to just try something, and point out ambiguities or missing bits. For missing topics, please send a follow-up patch ;-)
Also this is quite long, shall this be split up in two (or more) files?
This is what rst.ninjs.org made of it, if you prefer to read it formatted: https://paste.c-net.org/PleasantNeedy
Cheers, Andre
doc/board/allwinner/index.rst | 9 + doc/board/allwinner/sunxi.rst | 304 ++++++++++++++++++++++++++++++++++ 2 files changed, 313 insertions(+) create mode 100644 doc/board/allwinner/index.rst create mode 100644 doc/board/allwinner/sunxi.rst
Reviewed-by: Simon Glass sjg@chromium.org
I agree that a follow-on patch to remove the duplicated files would be helpful, but this patch is a big step forward on its own.
Thanks! I will address the other comments ASAP.
It would be interesting to convert sunxi to use binman.
But Samuel fixed that already, didn't he? Or is there anything left that binman should do? We even now use mkimage to generate the magic BROM SPL signature, and then let binman combine this with the FIT image into the final binary. Or am I missing something here?
Or are you asking for patches that remove sunxi as the bad example from the existing documentation? ;-)
Cheers, Andre