On Nov 21 2024, Heinrich Schuchardt wrote:
On 13.11.24 11:31, Andreas Schwab wrote:
"Error reading cluster" is the new error. U-Boot SPL 2025.01-rc2 (Nov 08 2024 - 07:13:26 +0000) DDR version: dc2e84f0. Trying to boot from MMC2 U-Boot 2025.01-rc2 (Nov 08 2024 - 07:13:26 +0000) CPU: sifive,u74-mc Model: StarFive VisionFive 2 v1.2A DRAM: 4 GiB Core: 136 devices, 26 uclasses, devicetree: board WDT: Not starting watchdog@13070000 MMC: mmc@16010000: 0, mmc@16020000: 1 Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB *** Warning - bad CRC, using default environment StarFive EEPROM format v2 --------EEPROM INFO-------- Vendor : StarFive Technology Co., Ltd. Product full SN: VF7110A1-2249-D004E000-00000408 data version: 0x2 PCB revision: 0xa1 BOM revision: A Ethernet MAC0 address: 6c:cf:39:00:16:8d Ethernet MAC1 address: 6c:cf:39:00:16:8e --------EEPROM INFO-------- starfive_7110_pcie pcie@2b000000: Starfive PCIe bus probed. starfive_7110_pcie pcie@2c000000: Starfive PCIe bus probed. In: serial@10000000 Out: serial@10000000 Err: serial@10000000 Net: eth0: ethernet@16030000, eth1: ethernet@16040000 starting USB... Bus xhci_pci: Register 5000420 NbrPorts 5 Starting the controller USB XHCI 1.00 scanning bus xhci_pci for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Working FDT set to ff72ca10 Hit any key to stop autoboot: 0 Card did not respond to voltage select! : -110 ** Booting bootflow '<NULL>' with efi_mgr Error reading cluster
This is a message from the FAT file system driver.
The file system is ok when read after interrupting the boot.
StarFive # mmc dev 1 switch to partitions #0, OK mmc1 is current device StarFive # ls mmc 1:1 EFI/ 304 ubootefi.var
1 file(s), 1 dir(s)
StarFive # ls mmc 1:1 EFI ./ ../ BOOT/
0 file(s), 3 dir(s)
StarFive # ls mmc 1:1 EFI/BOOT ./ ../ 167936 BOOTRISCV64.EFI 164 grub.cfg
2 file(s), 2 dir(s)
But running boot will end with the above error, and mmc 1 no longer works.
Which image reproduces the problem?
I've built U-Boot here https://build.opensuse.org/project/show/home:Andreas_Schwab:riscv:u-boot.