Hi Christopher,
On 06/19/2016 06:44 PM, Christopher Spinrath wrote:
The cm-fx6 module has an on-board st,m25p compatible spi flash chip used for u-boot (binary & environment). Overwrite the partitions in the device tree by the partition table provided in the mtdparts environment variable, if it is set.
This allows to specify a kernel independent partitioning in the environment and provides a convient way for the user to adapt the partition table.
Signed-off-by: Christopher Spinrath christopher.spinrath@rwth-aachen.de
board/compulab/cm_fx6/cm_fx6.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index 712057a..81a7ae2 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -12,6 +12,7 @@ #include <dm.h> #include <fsl_esdhc.h> #include <miiphy.h> +#include <mtd_node.h> #include <netdev.h> #include <errno.h> #include <usb.h> @@ -28,6 +29,7 @@ #include <asm/io.h> #include <asm/gpio.h> #include <dm/platform_data/serial_mxc.h> +#include <jffs2/load_kernel.h>
Why is this needed?
#include "common.h" #include "../common/eeprom.h" #include "../common/common.h" @@ -581,6 +583,13 @@ int cm_fx6_setup_ecspi(void) { return 0; }
#ifdef CONFIG_OF_BOARD_SETUP #define USDHC3_PATH "/soc/aips-bus@02100000/usdhc@02198000/"
+#ifdef CONFIG_FDT_FIXUP_PARTITIONS +struct node_info nodes[] = {
- { "st,m25p", MTD_DEV_TYPE_NOR, },
+}; +#endif
int ft_board_setup(void *blob, bd_t *bd) { u32 baseboard_rev; @@ -589,6 +598,8 @@ int ft_board_setup(void *blob, bd_t *bd) char baseboard_name[16]; int err;
- fdt_shrink_to_minimum(blob); /* Make room for new properties */
- /* MAC addr */ if (eth_getenv_enetaddr("ethaddr", enetaddr)) { fdt_find_and_setprop(blob,
@@ -607,7 +618,6 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; /* Assume not an early revision SB-FX6m baseboard */
if (!strncmp("SB-FX6m", baseboard_name, 7) && baseboard_rev <= 120) {
fdt_shrink_to_minimum(blob); /* Make room for new properties */@@ -616,6 +626,10 @@ int ft_board_setup(void *blob, bd_t *bd) NULL, 0, 1); }
+#ifdef CONFIG_FDT_FIXUP_PARTITIONS
- fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+#endif
I really dislike the ifdeffery inside functions. Care to introduce a stub for the !CONFIG_FDT_FIXUP_PARTITIONS case in include/fdt_support.h for this one?
- return 0;
} #endif