At present it is not possible to discover the contraints to repacking an image (e.g. maximum section size) since this information is not preserved from the original image description.
Add new 'orig-offset' and 'orig-size' properties to hold this. Add them to the main device tree in the image.
Signed-off-by: Simon Glass sjg@chromium.org ---
tools/binman/README | 23 ++++++ tools/binman/README.entries | 8 ++- tools/binman/entry.py | 18 ++++- tools/binman/etype/fdtmap.py | 3 + tools/binman/ftest.py | 70 ++++++++++++++++++- tools/binman/image.py | 13 +++- tools/binman/state.py | 21 ++++-- .../binman/test/134_fdt_update_all_repack.dts | 23 ++++++ 8 files changed, 165 insertions(+), 14 deletions(-) create mode 100644 tools/binman/test/134_fdt_update_all_repack.dts
diff --git a/tools/binman/README b/tools/binman/README index 35223545194..6a1cd110a4c 100644 --- a/tools/binman/README +++ b/tools/binman/README @@ -481,6 +481,29 @@ name-prefix: distinguish binaries with otherwise identical names.
+Image Properties +---------------- + +Image nodes act like sections but also have a few extra properties: + +filename: + Output filename for the image. This defaults to image.bin (or in the + case of multiple images <nodename>.bin where <nodename> is the name of + the image node. + +allow-repack: + Create an image that can be repacked. With this option it is possible + to change anything in the image after it is created, including updating + the position and size of image components. By default this is not + permitted since it is not possibly to know whether this might violate a + constraint in the image description. For example, if a section has to + increase in size to hold a larger binary, that might cause the section + to fall out of its allow region (e.g. read-only portion of flash). + + Adding this property causes the original offset and size values in the + image description to be stored in the FDT and fdtmap. + + Entry Documentation -------------------
diff --git a/tools/binman/README.entries b/tools/binman/README.entries index 7ce88ee5da8..37b8b4c4f98 100644 --- a/tools/binman/README.entries +++ b/tools/binman/README.entries @@ -230,7 +230,9 @@ Properties / Entry arguments: None
An FDT map is just a header followed by an FDT containing a list of all the -entries in the image. +entries in the image. The root node corresponds to the image node in the +original FDT, and an image-name property indicates the image name in that +original tree.
The header is the string _FDTMAP_ followed by 8 unused bytes.
@@ -244,6 +246,7 @@ FDT with the position of each entry. Example output for a simple image with U-Boot and an FDT map:
/ { + image-name = "binman"; size = <0x00000112>; image-pos = <0x00000000>; offset = <0x00000000>; @@ -259,6 +262,9 @@ Example output for a simple image with U-Boot and an FDT map: }; };
+If allow-repack is used then 'orig-offset' and 'orig-size' properties are +added as necessary. See the binman README. +
Entry: files: Entry containing a set of files diff --git a/tools/binman/entry.py b/tools/binman/entry.py index 07d5838c1a2..74e280849c4 100644 --- a/tools/binman/entry.py +++ b/tools/binman/entry.py @@ -161,8 +161,11 @@ class Entry(object): self.Raise("Please use 'offset' instead of 'pos'") self.offset = fdt_util.GetInt(self._node, 'offset') self.size = fdt_util.GetInt(self._node, 'size') - self.orig_offset = self.offset - self.orig_size = self.size + self.orig_offset = fdt_util.GetInt(self._node, 'orig-offset') + self.orig_size = fdt_util.GetInt(self._node, 'orig-size') + if self.GetImage().copy_to_orig: + self.orig_offset = self.offset + self.orig_size = self.size
# These should not be set in input files, but are set in an FDT map, # which is also read by this code. @@ -207,6 +210,12 @@ class Entry(object): for prop in ['offset', 'size', 'image-pos']: if not prop in self._node.props: state.AddZeroProp(self._node, prop) + if self.GetImage().allow_repack: + if self.orig_offset is not None: + state.AddZeroProp(self._node, 'orig-offset', True) + if self.orig_size is not None: + state.AddZeroProp(self._node, 'orig-size', True) + if self.compress != 'none': state.AddZeroProp(self._node, 'uncomp-size') err = state.CheckAddHashProp(self._node) @@ -219,6 +228,11 @@ class Entry(object): state.SetInt(self._node, 'size', self.size) base = self.section.GetRootSkipAtStart() if self.section else 0 state.SetInt(self._node, 'image-pos', self.image_pos - base) + if self.GetImage().allow_repack: + if self.orig_offset is not None: + state.SetInt(self._node, 'orig-offset', self.orig_offset, True) + if self.orig_size is not None: + state.SetInt(self._node, 'orig-size', self.orig_size, True) if self.uncomp_size is not None: state.SetInt(self._node, 'uncomp-size', self.uncomp_size) state.CheckSetHashValue(self._node, self.GetData) diff --git a/tools/binman/etype/fdtmap.py b/tools/binman/etype/fdtmap.py index 1271b50036a..ff3f1ae8129 100644 --- a/tools/binman/etype/fdtmap.py +++ b/tools/binman/etype/fdtmap.py @@ -75,6 +75,9 @@ class Entry_fdtmap(Entry): offset = <0x00000004>; }; }; + + If allow-repack is used then 'orig-offset' and 'orig-size' properties are + added as necessary. See the binman README. """ def __init__(self, section, etype, node): Entry.__init__(self, section, etype, node) diff --git a/tools/binman/ftest.py b/tools/binman/ftest.py index e201b741c6f..b67e8a15086 100644 --- a/tools/binman/ftest.py +++ b/tools/binman/ftest.py @@ -75,6 +75,9 @@ EXTRACT_DTB_SIZE = 0x3c9 # Properties expected to be in the device tree when update_dtb is used BASE_DTB_PROPS = ['offset', 'size', 'image-pos']
+# Extra properties expected to be in the device tree when allow-repack is used +REPACK_DTB_PROPS = ['orig-offset', 'orig-size'] +
class TestFunctional(unittest.TestCase): """Functional tests for binman @@ -1244,7 +1247,7 @@ class TestFunctional(unittest.TestCase): update_dtb=True) dtb = fdt.Fdt(out_dtb_fname) dtb.Scan() - props = self._GetPropTree(dtb, BASE_DTB_PROPS) + props = self._GetPropTree(dtb, BASE_DTB_PROPS + REPACK_DTB_PROPS) self.assertEqual({ 'image-pos': 0, 'offset': 0, @@ -1587,7 +1590,8 @@ class TestFunctional(unittest.TestCase): for item in ['', 'spl', 'tpl']: dtb = fdt.Fdt.FromData(data[start:]) dtb.Scan() - props = self._GetPropTree(dtb, BASE_DTB_PROPS + ['spl', 'tpl']) + props = self._GetPropTree(dtb, BASE_DTB_PROPS + REPACK_DTB_PROPS + + ['spl', 'tpl']) expected = dict(base_expected) if item: expected[item] = 0 @@ -2821,5 +2825,67 @@ class TestFunctional(unittest.TestCase): # Check the state looks right. self.assertEqual('/binman/first-image', state.fdt_path_prefix)
+ def testUpdateFdtAllRepack(self): + """Test that all device trees are updated with offset/size info""" + data = self._DoReadFileRealDtb('134_fdt_update_all_repack.dts') + SECTION_SIZE = 0x300 + DTB_SIZE = 602 + FDTMAP_SIZE = 608 + base_expected = { + 'offset': 0, + 'size': SECTION_SIZE + DTB_SIZE * 2 + FDTMAP_SIZE, + 'image-pos': 0, + 'section:offset': 0, + 'section:size': SECTION_SIZE, + 'section:image-pos': 0, + 'section/u-boot-dtb:offset': 4, + 'section/u-boot-dtb:size': 636, + 'section/u-boot-dtb:image-pos': 4, + 'u-boot-spl-dtb:offset': SECTION_SIZE, + 'u-boot-spl-dtb:size': DTB_SIZE, + 'u-boot-spl-dtb:image-pos': SECTION_SIZE, + 'u-boot-tpl-dtb:offset': SECTION_SIZE + DTB_SIZE, + 'u-boot-tpl-dtb:image-pos': SECTION_SIZE + DTB_SIZE, + 'u-boot-tpl-dtb:size': DTB_SIZE, + 'fdtmap:offset': SECTION_SIZE + DTB_SIZE * 2, + 'fdtmap:size': FDTMAP_SIZE, + 'fdtmap:image-pos': SECTION_SIZE + DTB_SIZE * 2, + } + main_expected = { + 'section:orig-size': SECTION_SIZE, + 'section/u-boot-dtb:orig-offset': 4, + } + + # We expect three device-tree files in the output, with the first one + # within a fixed-size section. + # Read them in sequence. We look for an 'spl' property in the SPL tree, + # and 'tpl' in the TPL tree, to make sure they are distinct from the + # main U-Boot tree. All three should have the same positions and offset + # except that the main tree should include the main_expected properties + start = 4 + for item in ['', 'spl', 'tpl', None]: + if item is None: + start += 16 # Move past fdtmap header + dtb = fdt.Fdt.FromData(data[start:]) + dtb.Scan() + props = self._GetPropTree(dtb, + BASE_DTB_PROPS + REPACK_DTB_PROPS + ['spl', 'tpl'], + prefix='/' if item is None else '/binman/') + expected = dict(base_expected) + if item: + expected[item] = 0 + else: + # Main DTB and fdtdec should include the 'orig-' properties + expected.update(main_expected) + # Helpful for debugging: + #for prop in sorted(props): + #print('prop %s %s %s' % (prop, props[prop], expected[prop])) + self.assertEqual(expected, props) + if item == '': + start = SECTION_SIZE + else: + start += dtb._fdt_obj.totalsize() + + if __name__ == "__main__": unittest.main() diff --git a/tools/binman/image.py b/tools/binman/image.py index 5185b68990a..c81f7e3172e 100644 --- a/tools/binman/image.py +++ b/tools/binman/image.py @@ -36,19 +36,25 @@ class Image(section.Entry_section): image_node: Name of node containing the description for this image fdtmap_dtb: Fdt object for the fdtmap when loading from a file fdtmap_data: Contents of the fdtmap when loading from a file + allow_repack: True to add properties to allow the image to be safely + repacked later
Args: + copy_to_orig: Copy offset/size to orig_offset/orig_size after reading + from the device tree test: True if this is being called from a test of Images. This this case there is no device tree defining the structure of the section, so we create a section manually. """ - def __init__(self, name, node, test=False): - section.Entry_section.__init__(self, None, 'section', node, test) + def __init__(self, name, node, copy_to_orig=True, test=False): + section.Entry_section.__init__(self, None, 'section', node, test=test) + self.copy_to_orig = copy_to_orig self.name = 'main-section' self.image_name = name self._filename = '%s.bin' % self.image_name self.fdtmap_dtb = None self.fdtmap_data = None + self.allow_repack = False if not test: self.ReadNode()
@@ -57,6 +63,7 @@ class Image(section.Entry_section): filename = fdt_util.GetString(self._node, 'filename') if filename: self._filename = filename + self.allow_repack = fdt_util.GetBool(self._node, 'allow-repack')
@classmethod def FromFile(cls, fname): @@ -92,7 +99,7 @@ class Image(section.Entry_section):
# Return an Image with the associated nodes root = dtb.GetRoot() - image = Image('image', root) + image = Image('image', root, copy_to_orig=False) image.image_node = fdt_util.GetString(root, 'image-node', 'image') image.fdtmap_dtb = dtb image.fdtmap_data = fdtmap_data diff --git a/tools/binman/state.py b/tools/binman/state.py index 08e627985de..2379e24ef6d 100644 --- a/tools/binman/state.py +++ b/tools/binman/state.py @@ -226,7 +226,7 @@ def GetAllFdts(): if dtb != main_dtb: yield dtb
-def GetUpdateNodes(node): +def GetUpdateNodes(node, for_repack=False): """Yield all the nodes that need to be updated in all device trees
The property referenced by this node is added to any device trees which @@ -235,25 +235,31 @@ def GetUpdateNodes(node):
Args: node: Node object in the main device tree to look up + for_repack: True if we want only nodes which need 'repack' properties + added to them (e.g. 'orig-offset'), False to return all nodes. We + don't add repack properties to SPL/TPL device trees.
Yields: Node objects in each device tree that is in use (U-Boot proper, which is node, SPL and TPL) """ yield node - for dtb, fname, _ in output_fdt_info.values(): + for dtb, fname, entry in output_fdt_info.values(): if dtb != node.GetFdt(): + if for_repack and entry.etype != 'u-boot-dtb': + continue other_node = dtb.GetNode(fdt_path_prefix + node.path) if other_node: yield other_node
-def AddZeroProp(node, prop): +def AddZeroProp(node, prop, for_repack=False): """Add a new property to affected device trees with an integer value of 0.
Args: prop_name: Name of property + for_repack: True is this property is only needed for repacking """ - for n in GetUpdateNodes(node): + for n in GetUpdateNodes(node, for_repack): n.AddZeroProp(prop)
def AddSubnode(node, name): @@ -283,15 +289,18 @@ def AddString(node, prop, value): for n in GetUpdateNodes(node): n.AddString(prop, value)
-def SetInt(node, prop, value): +def SetInt(node, prop, value, for_repack=False): """Update an integer property in affected device trees with an integer value
This is not allowed to change the size of the FDT.
Args: prop_name: Name of property + for_repack: True is this property is only needed for repacking """ - for n in GetUpdateNodes(node): + for n in GetUpdateNodes(node, for_repack): + tout.Detail("File %s: Update node '%s' prop '%s' to %#x" % + (node.GetFdt().name, node.path, prop, value)) n.SetInt(prop, value)
def CheckAddHashProp(node): diff --git a/tools/binman/test/134_fdt_update_all_repack.dts b/tools/binman/test/134_fdt_update_all_repack.dts new file mode 100644 index 00000000000..625d37673bd --- /dev/null +++ b/tools/binman/test/134_fdt_update_all_repack.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + + binman { + allow-repack; + section { + size = <0x300>; + u-boot-dtb { + offset = <4>; + }; + }; + u-boot-spl-dtb { + }; + u-boot-tpl-dtb { + }; + fdtmap { + }; + }; +};