CONFIG_SPL_NAND_MINIMAL should not be used as it was defined for temporary review purpose.
So, use CONFIG_SPL_NAND_BOOT config.
Signed-off-by: Prabhakar Kushwaha prabhakar@freescale.com --- Changes for v2: Incorporated Scott's comments - Add CONFIG_SPL_NAND_BOOT in README
README | 3 +++ board/freescale/bsc9131rdb/tlb.c | 2 +- board/freescale/bsc9132qds/tlb.c | 2 +- board/freescale/p1010rdb/tlb.c | 2 +- include/configs/BSC9131RDB.h | 2 +- include/configs/BSC9132QDS.h | 2 +- include/configs/P1010RDB.h | 2 +- 7 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/README b/README index 265e81e..88a4722 100644 --- a/README +++ b/README @@ -3245,6 +3245,9 @@ FIT uImage format: Defines the size and behavior of the NAND that SPL uses to read U-Boot
+ CONFIG_SPL_NAND_BOOT + Add support NAND boot + CONFIG_SYS_NAND_U_BOOT_OFFS Location in NAND to read U-Boot from
diff --git a/board/freescale/bsc9131rdb/tlb.c b/board/freescale/bsc9131rdb/tlb.c index 669fe8a..c8ecf5d 100644 --- a/board/freescale/bsc9131rdb/tlb.c +++ b/board/freescale/bsc9131rdb/tlb.c @@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_4K, 1), -#ifdef CONFIG_SPL_NAND_MINIMAL +#ifdef CONFIG_SPL_NAND_BOOT SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 10, BOOKE_PAGESZ_4K, 1), diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c index 02655e9..07febc2 100644 --- a/board/freescale/bsc9132qds/tlb.c +++ b/board/freescale/bsc9132qds/tlb.c @@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_4K, 1), -#ifdef CONFIG_SPL_NAND_MINIMAL +#ifdef CONFIG_SPL_NAND_BOOT SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 10, BOOKE_PAGESZ_4K, 1), diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c index a7af0f6..a3d36b3 100644 --- a/board/freescale/p1010rdb/tlb.c +++ b/board/freescale/p1010rdb/tlb.c @@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_4K, 1), -#ifdef CONFIG_SPL_NAND_MINIMAL +#ifdef CONFIG_SPL_NAND_BOOT SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 10, BOOKE_PAGESZ_4K, 1), diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 499d8c2..783d996 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -29,7 +29,7 @@ #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_MINIMAL +#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index a6601fe..f7cd955 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -38,7 +38,7 @@ #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_MINIMAL +#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index eab386a..22538fc 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -37,7 +37,7 @@ #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_MINIMAL +#define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"