[U-Boot] uboot xip eim nor

Hi,

I am trying to configure uboot for xip from eim nor for a custom imx6solo board. Can someone suggest what modifications are needed for this in uboot. I have borrowed configurations from imx6 based boards and stripped them down to bare minimum.

Also, if anyone can explain how do we select the values of the following configs: CONFIG_SYS_TEXT_BASE CONFIG_LOADADDR The nor address starts at 0x0800 0000, if I set the CONFIG_SYS_TEXT_BASE as nor start address. The load address inside IVT header is 0x07fff908 which falls outside of NOR region.

Best regards,

Shreyank Amartya RBEI/ESD2