When VID feature is supported, check the contents of fuse register and configure DDR operate at 0.9v.
Signed-off-by: Ashish Kumar Ashish.Kumar@nxp.com Signed-off-by: Rajesh Bhagat rajesh.bhagat@nxp.com --- board/freescale/ls1088a/ddr.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/board/freescale/ls1088a/ddr.c b/board/freescale/ls1088a/ddr.c index e24bfd5..f3e70b5 100644 --- a/board/freescale/ls1088a/ddr.c +++ b/board/freescale/ls1088a/ddr.c @@ -13,6 +13,23 @@
DECLARE_GLOBAL_DATA_PTR;
+#if defined(CONFIG_VID) && (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) +void fsl_ddr_setup_0v9_volt(memctl_options_t *popts) +{ + int vdd; + + vdd = get_core_volt_from_fuse(); + /* Nothing to do for silicons doesn't support VID */ + if (vdd < 0) + return; + + if (vdd == 900) { + popts->ddr_cdr1 |= DDR_CDR1_V0PT9_EN; + printf("VID: configure DDR to support 900 mV\n"); + } +} +#endif + void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) @@ -87,6 +104,10 @@ found: popts->addr_hash = 1;
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_60ohm); +#if defined(CONFIG_VID) && (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) + fsl_ddr_setup_0v9_volt(popts); +#endif + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) | DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2; }