This patch adds a call to spl_early_init() to board_init_f() which is needed when CONFIG_SPL_OF_CONTROL is configured. This is necessary for the early SPL setup including the DTB setup for later usage.
Please note that this call might also be needed for non SPL_OF_CONTROL board, like the smartweb target. But smartweb fails to build with this call because its binary grows too big. So I disabled it for these kind of targets for now.
Signed-off-by: Stefan Roese sr@denx.de Cc: Heiko Schocher hs@denx.de Cc: Andreas Bießmann andreas@biessmann.org Cc: Eugen Hristev eugen.hristev@microchip.com Reviewed-by: Heiko Schocher hs@denx.de Tested on the taurus board: Tested-by: Heiko Schocher hs@denx.de --- v3: - No change
v2: - No change
arch/arm/mach-at91/spl_at91.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm/mach-at91/spl_at91.c b/arch/arm/mach-at91/spl_at91.c index 23ebaa99b1..1065f090e0 100644 --- a/arch/arm/mach-at91/spl_at91.c +++ b/arch/arm/mach-at91/spl_at91.c @@ -75,6 +75,16 @@ void __weak spl_board_init(void)
void board_init_f(ulong dummy) { +#if CONFIG_IS_ENABLED(OF_CONTROL) + int ret; + + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } +#endif + lowlevel_clock_init(); #if !defined(CONFIG_WDT_AT91) at91_disable_wdt();