On 2024/5/12 20:16, Jonas Karlman wrote:
GPIO IOMUX control is located at PMU2_IOC or BUS_IOC offset on RK3588.
Based on Linux commit fdc33eba11c5 ("pinctrl/rockchip: add rk3588 support").
Compared to the Linux commit, this include a fix so that the iomux of GPIO0_B4-D7 is reported correctly.
Signed-off-by: Jonas Karlman jonas@kwiboo.se
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
The fix to report correct iomux for GPIO0_B4-D7 will be sent to Linux.
.../pinctrl/rockchip/pinctrl-rockchip-core.c | 24 ++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c index 973e6a4f6db9..efc2070d32d9 100644 --- a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c +++ b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c @@ -14,10 +14,10 @@ #include <linux/libfdt.h>
#include "pinctrl-rockchip.h" +#include <dt-bindings/pinctrl/rockchip.h>
#define MAX_ROCKCHIP_PINS_ENTRIES 30 #define MAX_ROCKCHIP_GPIO_PER_BANK 32 -#define RK_FUNC_GPIO 0
static int rockchip_verify_config(struct udevice *dev, u32 bank, u32 pin) { @@ -147,6 +147,28 @@ static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin) if (bank->recalced_mask & BIT(pin)) rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask);
- if (IS_ENABLED(CONFIG_ROCKCHIP_RK3588)) {
if (bank->bank_num == 0) {if (pin >= RK_PB4 && pin <= RK_PD7) {u32 reg0 = 0;reg0 = reg + 0x4000 - 0xC; /* PMU2_IOC_BASE */ret = regmap_read(regmap, reg0, &val);if (ret)return ret;ret = ((val >> bit) & mask);if (ret != 8)return ret;reg = reg + 0x8000; /* BUS_IOC_BASE */regmap = priv->regmap_base;}} else if (bank->bank_num > 0) {reg += 0x8000; /* BUS_IOC_BASE */}- }
- ret = regmap_read(regmap, reg, &val); if (ret) return ret;