This adds the device trees and minimal code needed to run U-Boot on Broadcom Northstar SoCs.
This is needed to properly boot the D-Link DIR-890L router as it refuse to directly boot compressed kernels bigger than 2MB, and well our compressed kernel is bigger than 2MB so let's put in U-Boot.
While it is a bit tailored to this usecase (it can probably also be used with the DIR-885L without modifications) it forms a base that can be used to support more Northstar boards.
I have this working with DIR-890L and OpenWrt: https://dflund.se/~triad/krad/dlink-dir-890l/
ChangeLog v1->v3: - Bundle with the iproc NAND and nand base pacthes as the iproc patch is a prerequisite. - Jump from v1->v3 as the other patches was at version v3.
It is a bit of a mystery to me who can merge this patches... BRCM custodian?
Linus Walleij (5): nand: brcmnand: add iproc support mtd: rawnand: nand_base: Handle algorithm selection arm: dts: Import device tree for Broadcom Northstar arm: Add support for the Broadcom Northstar SoCs board: Add new Broadcom Northstar board
arch/arm/Kconfig | 22 +- arch/arm/dts/Makefile | 2 + arch/arm/dts/bcm5301x.dtsi | 581 +++++++++++++++++++++ arch/arm/dts/ns-board.dts | 57 ++ board/broadcom/bcmns/Kconfig | 12 + board/broadcom/bcmns/MAINTAINERS | 6 + board/broadcom/bcmns/Makefile | 2 + board/broadcom/bcmns/ns.c | 60 +++ configs/bcmns_defconfig | 41 ++ drivers/mtd/nand/raw/Kconfig | 7 + drivers/mtd/nand/raw/brcmnand/Makefile | 1 + drivers/mtd/nand/raw/brcmnand/iproc_nand.c | 148 ++++++ drivers/mtd/nand/raw/nand_base.c | 12 +- include/configs/bcmns.h | 49 ++ include/dt-bindings/clock/bcm-nsp.h | 51 ++ 15 files changed, 1047 insertions(+), 4 deletions(-) create mode 100644 arch/arm/dts/bcm5301x.dtsi create mode 100644 arch/arm/dts/ns-board.dts create mode 100644 board/broadcom/bcmns/Kconfig create mode 100644 board/broadcom/bcmns/MAINTAINERS create mode 100644 board/broadcom/bcmns/Makefile create mode 100644 board/broadcom/bcmns/ns.c create mode 100644 configs/bcmns_defconfig create mode 100644 drivers/mtd/nand/raw/brcmnand/iproc_nand.c create mode 100644 include/configs/bcmns.h create mode 100644 include/dt-bindings/clock/bcm-nsp.h