El Fri, Jul 15, 2022 at 05:14:26PM +0200, Quentin Schulz deia:
From: Quentin Schulz quentin.schulz@theobroma-systems.com
An earlier commit makes the common SPL code call regulators_enable_boot_on and regulators_enable_boot_off before iterating over possible boot media for U-Boot proper. There is therefore no need to do this in the rk3399-specific code, so let's remove it.
Cc: Quentin Schulz foss+uboot@0leil.net Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com
Tested on a Rock-Pi-4B and didn't see any regression. Tested-by: Xavier Drudis Ferran xdrudis@tinet.cat
- This patch depends on https://lore.kernel.org/u-boot/20220715150949.952853-1-foss+uboot@0leil.net/ and https://lore.kernel.org/u-boot/20220715150949.952853-2-foss+uboot@0leil.net/
arch/arm/mach-rockchip/rk3399/rk3399.c | 10 ---------- 1 file changed, 10 deletions(-)
diff --git a/arch/arm/mach-rockchip/rk3399/rk3399.c b/arch/arm/mach-rockchip/rk3399/rk3399.c index db8a6cb83a..691d69dc59 100644 --- a/arch/arm/mach-rockchip/rk3399/rk3399.c +++ b/arch/arm/mach-rockchip/rk3399/rk3399.c @@ -277,15 +277,5 @@ void spl_board_init(void) if (cru->glb_rst_st != 0) rk3399_force_power_on_reset(); }
- if (IS_ENABLED(CONFIG_SPL_DM_REGULATOR)) {
/** Turning the eMMC and SPI back on (if disabled via the Qseven* BIOS_ENABLE) signal is done through a always-on regulator).*/if (regulators_enable_boot_on(false))debug("%s: Cannot enable boot on regulator\n",__func__);- }
}
#endif
2.36.1