n Wed, Jul 10, 2013 at 01:54:14AM +0200, Andre Przywara wrote:
A prerequisite for using virtualization is to be in HYP mode, which requires the CPU to be in non-secure state first. Add new file in arch/arm/cpu/armv7 to hold a monitor handler routine which switches the CPU to non-secure state by setting the NS and associated bits. According to the ARM architecture reference manual this should not be done in SVC mode, so we have to setup a SMC handler for this. We create a new vector table to avoid interference with other boards. The MVBAR register will be programmed later just before the smc call.
Signed-off-by: Andre Przywara andre.przywara@linaro.org
arch/arm/cpu/armv7/Makefile | 4 +++ arch/arm/cpu/armv7/nonsec_virt.S | 54 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 58 insertions(+) create mode 100644 arch/arm/cpu/armv7/nonsec_virt.S
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 7a8c2d0..5d75077 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -36,6 +36,10 @@ ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONF SOBJS += lowlevel_init.o endif
+ifneq ($(CONFIG_ARMV7_NONSEC),) +SOBJS += nonsec_virt.o +endif
SRCS := $(START:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) START := $(addprefix $(obj),$(START)) diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S new file mode 100644 index 0000000..68a6b38 --- /dev/null +++ b/arch/arm/cpu/armv7/nonsec_virt.S @@ -0,0 +1,54 @@ +/*
- code for switching cores into non-secure state
- Copyright (c) 2013 Andre Przywara andre.przywara@linaro.org
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#include <config.h>
+/* the vector table for secure state */ +_monitor_vectors:
- .word 0 /* reset */
- .word 0 /* undef */
- adr pc, _secure_monitor
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0
- .word 0 /* pad */
+/*
- software interrupt aka. secure monitor handler
a software interrupt is not aka. a secure monitor handler, this is misleading, it's just the smc handler.
- This is executed on a "smc" instruction, we use a "smc #0" to switch
- to non-secure state.
- We use only r0 and r1 here, due to constraints in the caller.
- */
- .align 5
+_secure_monitor:
- mrc p15, 0, r1, c1, c1, 0 @ read SCR
- bic r1, r1, #0x4e @ clear IRQ, FIQ, EA, nET bits
- orr r1, r1, #0x31 @ enable NS, AW, FW bits
- mcr p15, 0, r1, c1, c1, 0 @ write SCR (with NS bit set)
- movs pc, lr @ return to non-secure SVC
-- 1.7.12.1