Kim Phillips schrieb:
On Tue, 25 Mar 2008 21:25:45 +0100 Andre Schwarz andre.schwarz@matrix-vision.de wrote:
I've seen things like this in mpc8349emds code :
#if (CFG_DDR_SIZE != 256) #warning Currenly any ddr size other than 256 is not supported #endif
Is this reasonable ? Why ?
that's in the fixed sdram init code, which could be considered reasonably unreasonable by some I suppose, since we can't guarantee the fixed settings will work with whatever memory you decide to use with it. It should work with the memory that comes with the board, though.
fixed_sdram is ok - that's what I have and want to use. I'm setting up the proper CFG_DDR_ defines in my header regarding the Manufacturer's spec.
btw, the spd code is being used by default on the 834x mds, not this fixed_sdram stuff - it's mostly there for board porting completeness.
But it is known to work, isn't it ?
Kim
regards, Andre
MATRIX VISION GmbH, Talstraße 16, DE-71570 Oppenweiler - Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschäftsführer: Gerhard Thullner, Werner Armingeon, Uwe Furtner