On 03/09/2018 04:39 AM, Dinh Nguyen wrote:
Hi,
This is a very small initial patchset for the SoCFPGA Stratix10 platform. This patchset adds a few core address defines that are not obtainable from DT, pulls in from Linux the base DTS files, and the reset manager bindings. The DTB is able to compile with this patchset.
Instead of dropping a larger patchset with for SPL and U-Boot, I figure we start out small first, and allow for a couple of medium size patchset later for further support.
Thanks, Dinh
Chin Liang See (1): arm: socfpga: stratix10: Add base address map for Statix10 SoC
Dinh Nguyen (2): ARM64: stratix10: add reset manager includes ARM: dts: stratix10: Add base dtsi and devkit dts
arch/arm/dts/Makefile | 1 + arch/arm/dts/socfpga_stratix10.dtsi | 381 +++++++++++++++++++++ arch/arm/dts/socfpga_stratix10_socdk.dts | 92 +++++ arch/arm/mach-socfpga/include/mach/base_addr_s10.h | 33 ++ include/dt-bindings/reset/altr,rst-mgr-s10.h | 97 ++++++ 5 files changed, 604 insertions(+) create mode 100644 arch/arm/dts/socfpga_stratix10.dtsi create mode 100644 arch/arm/dts/socfpga_stratix10_socdk.dts create mode 100644 arch/arm/mach-socfpga/include/mach/base_addr_s10.h create mode 100644 include/dt-bindings/reset/altr,rst-mgr-s10.h
I hope this will not become a pile of dead code ... Applied all, thanks