On Sunday 16 April 2017 10:13 AM, Lokesh Vutla wrote:
As per the DM[1] Dated June 2016–Revised February 2017, Table 5-3, DRA71 supports the following OPPs for various voltage domains:
VDD_MPU: OPP_NOM VDD_CORE: OPP_NOM VDD_GPU: OPP_NOM VDD_DSPEVE: OPP_NOM, OPP_HIGH VDD_IVA: OPP_NOM, OPP_HIGH
This patch add support for selection of the above OPPs instead of using OPP_NOM for all voltage domains.
[1] http://www.ti.com/lit/ds/symlink/dra718.pdf
Reported-by: Vishal Mahaveer vishalm@ti.com Signed-off-by: Lokesh Vutla lokeshvutla@ti.com
Just posted v2 of this patch as fixing efuse reg bits for OPP_HIGH as pointed out by Suman.
Thanks and regards, Lokesh
board/ti/dra7xx/evm.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index ae2d59da43..0984475d3b 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -456,27 +456,44 @@ int get_voltrail_opp(int rail_offset) { int opp;
- /*
* DRA71x supports only OPP_NOM.*/- if (board_is_dra71x_evm())
return OPP_NOM;- switch (rail_offset) { case VOLT_MPU: opp = DRA7_MPU_OPP;
/* DRA71x supports only OPP_NOM for MPU */if (board_is_dra71x_evm())opp = OPP_NOM;/* DRA71x supports only OPP_NOM for CORE */if (board_is_dra71x_evm())opp = OPP_NOM;/* DRA71x supports only OPP_NOM for GPU */if (board_is_dra71x_evm())opp = OPP_NOM;/** DRA71x does not support OPP_OD for EVE.* If OPP_OD is selected by menuconfig, fallback* to OPP_NOM.*/if (board_is_dra71x_evm() && opp == OPP_OD)opp = OPP_NOM;/** DRA71x does not support OPP_OD for IVA.* If OPP_OD is selected by menuconfig, fallback* to OPP_NOM.*/if (board_is_dra71x_evm() && opp == OPP_OD)opp = OPP_NOM;