On 5/5/21 11:40 PM, Tianrui Wei wrote:
From: Tianrui Wei tianrui-wei@outlook.com Date: Thu, 6 May 2021 11:30:20 +0800 Subject: [PATCH V4 1/2] mmc: add OpenPiton mmc support
This patch adds mmc support for OpenPiton. Specifically, some dts bindings were not used because our mmc controller doens't have those configuration options, it only exposes a dummy mmap interface for CPU.
Please wrap your commit messages to 75 characterss, not 56 ;)
Signed-off-by: Tianrui Wei tianrui-wei@outlook.com Signed-off-by: Jonathan Balkind jbalkind@ucsb.edu
drivers/mmc/Kconfig | 7 + drivers/mmc/Makefile | 1 + drivers/mmc/piton_mmc.c | 172 +++++ 3 files changed, 180 insertions(+) create mode 100644 drivers/mmc/piton_mmc.c
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 14d79139..1038800f 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -707,6 +707,13 @@ config MMC_SUNXI_HAS_MODE_SWITCH bool depends on MMC_SUNXI
+config MMC_PITON
- bool "MMC support for openpiton SoC"
- depends on DM_MMC && BLK
- help
- This driver enables SD card support in U-Boot port for
- OpenPiton SoC
- config GENERIC_ATMEL_MCI bool "Atmel Multimedia Card Interface support" depends on DM_MMC && BLK && ARCH_AT91
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 1c849cba..698dfe05 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_MMC_SDHCI_XENON) += xenon_sdhci.o obj-$(CONFIG_MMC_SDHCI_ZYNQ) += zynq_sdhci.o
obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o +obj-$(CONFIG_MMC_PITON) += piton_mmc.o
Fix indentation. And please place this object in alphabetical order.
obj-$(CONFIG_MMC_UNIPHIER) += tmio-common.o uniphier-sd.o obj-$(CONFIG_RENESAS_SDHI) += tmio-common.o renesas-sdhi.o obj-$(CONFIG_MMC_BCM2835) += bcm2835_sdhost.o diff --git a/drivers/mmc/piton_mmc.c b/drivers/mmc/piton_mmc.c new file mode 100644 index 00000000..266e26d8 --- /dev/null +++ b/drivers/mmc/piton_mmc.c @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- (C) Copyright 2009 SAMSUNG Electronics
- Minkyu Kang mk7.kang@samsung.com
- Jaehoon Chung jh80.chung@samsung.com
- Portions Copyright 2011-2019 NVIDIA Corporation
- Portions Copyright 2021 Tianrui Wei
- Tianrui Wei tianrui-wei@outlook.com
This is quite the list of authors. Where does this file come from?
- */
+#include <asm/gpio.h> +#include <asm/io.h> +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <linux/bitops.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <log.h> +#include <div64.h> +#include <mmc.h>
+struct piton_mmc_plat {
- struct mmc_config cfg;
- struct mmc mmc;
+};
Is platdata used? I don't see it in 2/2.
+struct piton_mmc_priv {
- u64 piton_mmc_base_addr; /* peripheral id */
This should be void __iomem *.
+};
+/*
- see mmc_read_blocks to see how it is used.
- start block is hidden at cmd->arg
- also, initialize the block size at init
- */
+static int piton_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
struct mmc_data *data)+{
- /* check first if this is a pure command */
- if (!data)
return 0;
Please place definitions before code (and please run checkpatch).
- u64 byte_cnt = data->blocks * data->blocksize;
- u64 start_block = cmd->cmdarg;
- unsigned int *buff = (unsigned int *)data->dest;
Why is buff an unsigned int? If you are using readl, shouldn't it be a long?
- struct piton_mmc_priv *priv = dev_get_priv(dev);
- u64 start_addr = priv->piton_mmc_base_addr + (start_block);
- /* if there is a read */
- if (data->flags & MMC_DATA_READ) {
for (u64 i = 0; i < byte_cnt; i += 4) {*(buff) = readl((void *)(start_addr + i));buff++;}
Can you use memcpy_fromio here?
- } else {
/* else there is a write* we don't handle write, so error right away*/return -ENODEV;
Please use -ENOSYS.
- }
- return 0;
+}
+static int piton_mmc_ofdata_to_platdata(struct udevice *dev) +{
- struct piton_mmc_priv *priv = dev_get_priv(dev);
- struct piton_mmc_plat *plat = dev_get_platdata(dev);
- struct mmc_config *cfg;
- struct mmc *mmc;
- /* fill in device description */
- struct blk_desc *bdesc;
- priv->piton_mmc_base_addr = dev_read_addr(dev);
- cfg = &plat->cfg;
- cfg->name = "PITON MMC";
- cfg->host_caps = MMC_MODE_8BIT;
- cfg->f_max = 100000;
- cfg->f_min = 400000;
- cfg->voltages = MMC_VDD_21_22;
- mmc = &plat->mmc;
- mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
- mmc->capacity_user = 0x100000000;
- mmc->capacity_user *= mmc->read_bl_len;
- mmc->capacity_boot = 0;
- mmc->capacity_rpmb = 0;
- for (int i = 0; i < 4; i++)
mmc->capacity_gp[i] = 0;- mmc->capacity = 0x2000000000ULL;
- mmc->has_init = 1;
- bdesc = mmc_get_blk_desc(mmc);
- bdesc->lun = 0;
- bdesc->hwpart = 0;
- bdesc->type = 0;
- bdesc->blksz = mmc->read_bl_len;
- bdesc->log2blksz = LOG2(bdesc->blksz);
- bdesc->lba = lldiv(mmc->capacity, mmc->read_bl_len);
- return 0;
+}
+/* test if piton has the micro mmc card present
- always return 1, which means present
- */
+static int piton_mmc_getcd(struct udevice *dev) +{
- /*
* always return 1*/- return 1;
+}
+/* dummy function, piton_mmc don't need initialization
- in hw
- */
+static const struct dm_mmc_ops piton_mmc_ops = {
- .send_cmd = piton_mmc_send_cmd,
- .set_ios = piton_mmc_set_ios,
- .get_cd = piton_mmc_getcd,
+};
+static int piton_mmc_probe(struct udevice *dev) +{
- struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
- struct piton_mmc_plat *plat = dev_get_platdata(dev);
- struct mmc_config *cfg = &plat->cfg;
- cfg->name = dev->name;
- upriv->mmc = &plat->mmc;
- upriv->mmc->has_init = 1;
- upriv->mmc->capacity = 0x2000000000ULL;
- upriv->mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
- return 0;
+}
+static int piton_mmc_bind(struct udevice *dev) +{
- struct piton_mmc_plat *plat = dev_get_platdata(dev);
- struct mmc_config *cfg = &plat->cfg;
- cfg->name = dev->name;
- cfg->host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_8BIT;
- cfg->voltages = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34;
- cfg->f_min = 1000000;
- cfg->f_max = 52000000;
- cfg->b_max = U32_MAX;
- return mmc_bind(dev, &plat->mmc, cfg);
+}
+static const struct udevice_id piton_mmc_ids[] = {
{.compatible = "openpiton,piton-mmc"},{ /* sentinel */ }+};
+U_BOOT_DRIVER(piton_mmc_drv) = {
- .name = "piton_mmc",
- .id = UCLASS_MMC,
- .of_match = piton_mmc_ids,
- .ofdata_to_platdata = piton_mmc_ofdata_to_platdata,
- .bind = piton_mmc_bind,
- .probe = piton_mmc_probe,
- .ops = &piton_mmc_ops,
- .platdata_auto_alloc_size = sizeof(struct piton_mmc_plat),
- .priv_auto_alloc_size = sizeof(struct piton_mmc_priv),
+};
--Sean