On 08:21 Mon 25 May , Daniel Gorsulowski wrote:
Jean-Christophe PLAGNIOL-VILLARD schrieb:
+static void meesc_ethercat_hw_init(void) +{
- /* Configure SMC EBI1_CS0 for EtherCAT */
- at91_sys_write(AT91_SMC1_SETUP(0),
AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));- at91_sys_write(AT91_SMC1_PULSE(0),
AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(9) |AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(9));- at91_sys_write(AT91_SMC1_CYCLE(0),
AT91_SMC_NWECYCLE_(10) | AT91_SMC_NRDCYCLE_(5));- /* Configure behavior at external wait signal, byte-select mode, 16 bit
- data bus width, none data float wait states and TDF optimization */
- at91_sys_write(AT91_SMC1_MODE(0),
AT91_SMC_READMODE | AT91_SMC_EXNWMODE_READY |AT91_SMC_BAT_SELECT | AT91_SMC_DBW_16 | AT91_SMC_TDF_(0) |AT91_SMC_TDFMODE);- /* Configure RDY/BSY */
- at91_set_B_periph(AT91_PIN_PE20, 0); /* EBI1_NWAIT */
do you really need this you do not seems to use it anywhere?
Yes, I really need this for debugging the ET1100 and for accessing its process memory by md/mw/mm.
ok maybe a note in a README will be nice
+}
+#ifdef CONFIG_HAS_DATAFLASH +#ifdef MACH_TYPE_MEESC /* while asm-arm/mach-types.h is not up to date */
you need to send a sync request
As I recognized, you sync against latest kernel source? The problem is, the mach-types in kernel source is not up to date: # Last update: Mon Mar 23 20:09:01 2009 There has been several sync requests since my commit on Tue, 7 Apr 2009 11:19:31 GMT (see http://www.arm.linux.org.uk/developer/machines/list.php?id=2165), but my board is not included in kernel source yet. So, imho a sync request makes no sense. Unless you sync against http://www.arm.linux.org.uk/developer/machines/download.php
Yes If need I'll sync against the last DB
Just add a note in the --- section of your patch to remind me that your board need it I'll do it just before applied it
Best Regards, J.