The imx8mn_beacon board does not use the same memory map as the reference design from NXP or other imx8mn boards. As such, memory is more limited in SPL.
Moving SPL_BSS_START_ADDR and SPL_STACK to default locations increases the amount of available meory for the SPL stack. Doing this allows the board to no longer define CONFIG_MALLOC_F_ADDR.
Since SYS_LOAD_ADDR also does not align with other boards, move it too.
Signed-off-by: Adam Ford aford173@gmail.com --- Depends on
https://patchwork.ozlabs.org/project/uboot/list/?series=312020 https://patchwork.ozlabs.org/project/uboot/list/?series=312016 https://patchwork.ozlabs.org/project/uboot/list/?series=312002
diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig index bd17788768..98a75d4950 100644 --- a/configs/imx8mn_beacon_2g_defconfig +++ b/configs/imx8mn_beacon_2g_defconfig @@ -15,10 +15,9 @@ CONFIG_TARGET_IMX8MN_BEACON=y CONFIG_IMX8MN_BEACON_2GB_LPDDR=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 -CONFIG_SYS_LOAD_ADDR=0x40480000 +CONFIG_SYS_LOAD_ADDR=0x42000000 CONFIG_SYS_MEMTEST_START=0x40000000 CONFIG_SYS_MEMTEST_END=0x44000000 CONFIG_LTO=y @@ -34,12 +33,12 @@ CONFIG_DEFAULT_FDT_FILE="imx8mn-beacon-kit.dtb" CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x95e000 +CONFIG_SPL_BSS_START_ADDR=0x950000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK=0x187ff0 +CONFIG_SPL_STACK=0x980000 CONFIG_SYS_SPL_MALLOC=y CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 diff --git a/configs/imx8mn_beacon_defconfig b/configs/imx8mn_beacon_defconfig index 738d308f45..271578985f 100644 --- a/configs/imx8mn_beacon_defconfig +++ b/configs/imx8mn_beacon_defconfig @@ -14,10 +14,9 @@ CONFIG_SPL_TEXT_BASE=0x912000 CONFIG_TARGET_IMX8MN_BEACON=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 -CONFIG_SYS_LOAD_ADDR=0x40480000 +CONFIG_SYS_LOAD_ADDR=0x42000000 CONFIG_SYS_MEMTEST_START=0x40000000 CONFIG_SYS_MEMTEST_END=0x44000000 CONFIG_LTO=y @@ -33,12 +32,12 @@ CONFIG_DEFAULT_FDT_FILE="imx8mn-beacon-kit.dtb" CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x95e000 +CONFIG_SPL_BSS_START_ADDR=0x950000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK=0x187ff0 +CONFIG_SPL_STACK=0x980000 CONFIG_SYS_SPL_MALLOC=y CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 diff --git a/configs/imx8mn_beacon_fspi_defconfig b/configs/imx8mn_beacon_fspi_defconfig index ecaefd8930..6da2182eb3 100644 --- a/configs/imx8mn_beacon_fspi_defconfig +++ b/configs/imx8mn_beacon_fspi_defconfig @@ -14,10 +14,9 @@ CONFIG_SPL_TEXT_BASE=0x912000 CONFIG_TARGET_IMX8MN_BEACON=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 -CONFIG_SYS_LOAD_ADDR=0x40480000 +CONFIG_SYS_LOAD_ADDR=0x42000000 CONFIG_SYS_MEMTEST_START=0x40000000 CONFIG_SYS_MEMTEST_END=0x44000000 CONFIG_LTO=y @@ -33,12 +32,12 @@ CONFIG_DEFAULT_FDT_FILE="imx8mn-beacon-kit.dtb" CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_MAX_SIZE=0x25000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x95e000 +CONFIG_SPL_BSS_START_ADDR=0x950000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SPL_STACK=0x187ff0 +CONFIG_SPL_STACK=0x980000 CONFIG_SYS_SPL_MALLOC=y CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index 6faecbde77..930b11b75e 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -13,14 +13,6 @@ #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD -/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x184000 - -/* For RAW image gives a error info not panic */ - -#endif /* CONFIG_SPL_BUILD */ - /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \