Commit 3cb9abc9c512 ("ARM: uniphier: update U-Boot file names in workflow") missed to update these two sentences. Fix them now.
Replace u-boot-spl-dtb.bin and u-boot-dtb.img with u-boot-spl.bin and u-boot.img, respectively.
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---
doc/README.uniphier | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/doc/README.uniphier b/doc/README.uniphier index 8d043be..47863a4 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -80,8 +80,8 @@ Write two files to the NAND device as follows: - u-boot.img at the offset address 0x00010000
If a TFTP server is available, the images can be easily updated. -Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public -directory, and then run the following command at the U-Boot command line: +Just copy the u-boot-spl.bin and u-boot.img to the TFTP public directory, +and then run the following command at the U-Boot command line:
=> run nandupdate
@@ -94,8 +94,8 @@ Write two files to the Boot partition 1 of the eMMC device as follows: - u-boot.img at the offset address 0x00010000
If a TFTP server is available, the images can be easily updated. -Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public -directory, and then run the following command at the U-Boot command line: +Just copy the u-boot-spl.bin and u-boot.img to the TFTP public directory, +and then run the following command at the U-Boot command line:
=> run emmcupdate