The kmtegr1, kmvect1, and suvd3 boards now have separate config files, which were all copied from the suvd3.
Unwind the #ifdef logic in these config files to only include the options necessary for each board.
Signed-off-by: Mario Six mario.six@gdsys.cc --- include/configs/kmtegr1.h | 90 --------------------------------------------- include/configs/kmvect1.h | 57 ---------------------------- include/configs/suvd3.h | 94 ----------------------------------------------- 3 files changed, 241 deletions(-)
diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h index 3e88c9000c..69397ae5ae 100644 --- a/include/configs/kmtegr1.h +++ b/include/configs/kmtegr1.h @@ -22,21 +22,6 @@
/* This needs to be set prior to including km/km83xx-common.h */
-#if defined(CONFIG_SUVD3) /* SUVD3 board specific */ -#define CONFIG_HOSTNAME "suvd3" -#define CONFIG_KM_BOARD_NAME "suvd3" -/* include common defines/options for all 8321 Keymile boards */ -#include "km/km8321-common.h" - -#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */ -#define CONFIG_HOSTNAME "kmvect1" -#define CONFIG_KM_BOARD_NAME "kmvect1" -/* at end of uboot partition, before env */ -#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000 -/* include common defines/options for all 8309 Keymile boards */ -#include "km/km8309-common.h" - -#elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */ #define CONFIG_HOSTNAME "kmtegr1" #define CONFIG_KM_BOARD_NAME "kmtegr1" #define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" @@ -55,10 +40,6 @@ /* must be after the include because KMBEC_FPGA is otherwise undefined */ #define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
-#else -#error Supported boards are: SUVD3, KMVECT1, KMTEGR1 -#endif - #define CONFIG_SYS_APP1_BASE 0xA0000000 #define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ #define CONFIG_SYS_APP2_BASE 0xB0000000 @@ -77,34 +58,6 @@ * */
-#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) -/* - * APP1 on the local bus CS2 - */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ - BR_PS_16 | \ - BR_MS_UPMA | \ - BR_V) -#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE)) - -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ - BR_PS_16 | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV4 | \ - OR_GPCM_SCY_3 | \ - OR_GPCM_TRLX_SET) - -#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ - 0x0000c000 | \ - MxMR_WLFx_2X) - -#elif defined(CONFIG_KMTEGR1) #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ BR_PS_16 | \ BR_MS_GPCM | \ @@ -115,31 +68,16 @@ OR_GPCM_TRLX_CLEAR | \ OR_GPCM_EHTR_CLEAR)
-#endif /* CONFIG_KMTEGR1 */ - #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE #define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
/* * MMU Setup */ -#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) -/* APP1: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -#elif defined(CONFIG_KMTEGR1) #define CONFIG_SYS_IBAT5L (0) #define CONFIG_SYS_IBAT5U (0) #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#endif /* CONFIG_KMTEGR1 */ - #define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \ BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \ @@ -148,33 +86,6 @@ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
-/* - * QE UEC ethernet configuration - */ -#if defined(CONFIG_KMVECT1) -#define CONFIG_MV88E6352_SWITCH -#define CONFIG_KM_MVEXTSW_ADDR 0x10 - -/* ethernet port connected to simple switch 88e6122 (UEC0) */ -#define CONFIG_UEC_ETH1 -#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9 -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 - -#define CONFIG_FIXED_PHY 0xFFFFFFFF -#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */ -#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \ - {devnum, speed, duplex} -#define CONFIG_SYS_FIXED_PHY_PORTS \ - CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL) - -#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR -#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII -#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 -#endif /* CONFIG_KMVECT1 */ - -#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1) /* ethernet port connected to piggy (UEC2) */ #define CONFIG_HAS_ETH1 #define CONFIG_UEC_ETH2 @@ -185,6 +96,5 @@ #define CONFIG_SYS_UEC2_PHY_ADDR 0 #define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 -#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */
#endif /* __CONFIG_H */ diff --git a/include/configs/kmvect1.h b/include/configs/kmvect1.h index 3e88c9000c..178e769976 100644 --- a/include/configs/kmvect1.h +++ b/include/configs/kmvect1.h @@ -22,13 +22,6 @@
/* This needs to be set prior to including km/km83xx-common.h */
-#if defined(CONFIG_SUVD3) /* SUVD3 board specific */ -#define CONFIG_HOSTNAME "suvd3" -#define CONFIG_KM_BOARD_NAME "suvd3" -/* include common defines/options for all 8321 Keymile boards */ -#include "km/km8321-common.h" - -#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */ #define CONFIG_HOSTNAME "kmvect1" #define CONFIG_KM_BOARD_NAME "kmvect1" /* at end of uboot partition, before env */ @@ -36,29 +29,6 @@ /* include common defines/options for all 8309 Keymile boards */ #include "km/km8309-common.h"
-#elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */ -#define CONFIG_HOSTNAME "kmtegr1" -#define CONFIG_KM_BOARD_NAME "kmtegr1" -#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" -#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" - -#define CONFIG_ENV_ADDR 0xF0100000 -#define CONFIG_ENV_OFFSET 0x100000 - -#define CONFIG_NAND_ECC_BCH -#define CONFIG_NAND_KMETER1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 - -/* include common defines/options for all 8309 Keymile boards */ -#include "km/km8309-common.h" -/* must be after the include because KMBEC_FPGA is otherwise undefined */ -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ - -#else -#error Supported boards are: SUVD3, KMVECT1, KMTEGR1 -#endif - #define CONFIG_SYS_APP1_BASE 0xA0000000 #define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ #define CONFIG_SYS_APP2_BASE 0xB0000000 @@ -77,7 +47,6 @@ * */
-#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) /* * APP1 on the local bus CS2 */ @@ -104,26 +73,12 @@ 0x0000c000 | \ MxMR_WLFx_2X)
-#elif defined(CONFIG_KMTEGR1) -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ - BR_PS_16 | \ - BR_MS_GPCM | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_CLEAR | \ - OR_GPCM_EHTR_CLEAR) - -#endif /* CONFIG_KMTEGR1 */ - #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE #define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
/* * MMU Setup */ -#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) /* APP1: icache cacheable, but dcache-inhibit and guarded */ #define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ BATL_MEMCOHERENCE) @@ -132,14 +87,6 @@ #define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -#elif defined(CONFIG_KMTEGR1) -#define CONFIG_SYS_IBAT5L (0) -#define CONFIG_SYS_IBAT5U (0) -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#endif /* CONFIG_KMTEGR1 */ - #define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \ BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \ @@ -151,7 +98,6 @@ /* * QE UEC ethernet configuration */ -#if defined(CONFIG_KMVECT1) #define CONFIG_MV88E6352_SWITCH #define CONFIG_KM_MVEXTSW_ADDR 0x10
@@ -172,9 +118,7 @@ #define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 -#endif /* CONFIG_KMVECT1 */
-#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1) /* ethernet port connected to piggy (UEC2) */ #define CONFIG_HAS_ETH1 #define CONFIG_UEC_ETH2 @@ -185,6 +129,5 @@ #define CONFIG_SYS_UEC2_PHY_ADDR 0 #define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 -#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */
#endif /* __CONFIG_H */ diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h index 3e88c9000c..2a3f7ff526 100644 --- a/include/configs/suvd3.h +++ b/include/configs/suvd3.h @@ -22,43 +22,11 @@
/* This needs to be set prior to including km/km83xx-common.h */
-#if defined(CONFIG_SUVD3) /* SUVD3 board specific */ #define CONFIG_HOSTNAME "suvd3" #define CONFIG_KM_BOARD_NAME "suvd3" /* include common defines/options for all 8321 Keymile boards */ #include "km/km8321-common.h"
-#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */ -#define CONFIG_HOSTNAME "kmvect1" -#define CONFIG_KM_BOARD_NAME "kmvect1" -/* at end of uboot partition, before env */ -#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000 -/* include common defines/options for all 8309 Keymile boards */ -#include "km/km8309-common.h" - -#elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */ -#define CONFIG_HOSTNAME "kmtegr1" -#define CONFIG_KM_BOARD_NAME "kmtegr1" -#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" -#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" - -#define CONFIG_ENV_ADDR 0xF0100000 -#define CONFIG_ENV_OFFSET 0x100000 - -#define CONFIG_NAND_ECC_BCH -#define CONFIG_NAND_KMETER1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 - -/* include common defines/options for all 8309 Keymile boards */ -#include "km/km8309-common.h" -/* must be after the include because KMBEC_FPGA is otherwise undefined */ -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ - -#else -#error Supported boards are: SUVD3, KMVECT1, KMTEGR1 -#endif - #define CONFIG_SYS_APP1_BASE 0xA0000000 #define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ #define CONFIG_SYS_APP2_BASE 0xB0000000 @@ -77,7 +45,6 @@ * */
-#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) /* * APP1 on the local bus CS2 */ @@ -104,26 +71,12 @@ 0x0000c000 | \ MxMR_WLFx_2X)
-#elif defined(CONFIG_KMTEGR1) -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ - BR_PS_16 | \ - BR_MS_GPCM | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_CLEAR | \ - OR_GPCM_EHTR_CLEAR) - -#endif /* CONFIG_KMTEGR1 */ - #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE #define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
/* * MMU Setup */ -#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) /* APP1: icache cacheable, but dcache-inhibit and guarded */ #define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ BATL_MEMCOHERENCE) @@ -132,14 +85,6 @@ #define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -#elif defined(CONFIG_KMTEGR1) -#define CONFIG_SYS_IBAT5L (0) -#define CONFIG_SYS_IBAT5U (0) -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#endif /* CONFIG_KMTEGR1 */ - #define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \ BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \ @@ -148,43 +93,4 @@ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
-/* - * QE UEC ethernet configuration - */ -#if defined(CONFIG_KMVECT1) -#define CONFIG_MV88E6352_SWITCH -#define CONFIG_KM_MVEXTSW_ADDR 0x10 - -/* ethernet port connected to simple switch 88e6122 (UEC0) */ -#define CONFIG_UEC_ETH1 -#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9 -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 - -#define CONFIG_FIXED_PHY 0xFFFFFFFF -#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */ -#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \ - {devnum, speed, duplex} -#define CONFIG_SYS_FIXED_PHY_PORTS \ - CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL) - -#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR -#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII -#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 -#endif /* CONFIG_KMVECT1 */ - -#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1) -/* ethernet port connected to piggy (UEC2) */ -#define CONFIG_HAS_ETH1 -#define CONFIG_UEC_ETH2 -#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */ -#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ -#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12 -#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC2_PHY_ADDR 0 -#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII -#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 -#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */ - #endif /* __CONFIG_H */