On 03.08.22 13:00, Pali Rohár wrote:
Set u-boot,dm-pre-reloc for /soc/, /soc/internal-regs/ and &uart0 nodes as it is required on every 32-bit Armada SoCs. And set also u-boot,dm-pre-reloc for &spi0 when going to boot from SPI because otherwise SPL SPI drivers do not load.
Signed-off-by: Pali Rohár pali@kernel.org
Reviewed-by: Stefan Roese sr@denx.de Tested-by: Stefan Roese sr@denx.de
Thanks, Stefan
arch/arm/dts/mvebu-u-boot.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 arch/arm/dts/mvebu-u-boot.dtsi
diff --git a/arch/arm/dts/mvebu-u-boot.dtsi b/arch/arm/dts/mvebu-u-boot.dtsi new file mode 100644 index 000000000000..5538f95148de --- /dev/null +++ b/arch/arm/dts/mvebu-u-boot.dtsi @@ -0,0 +1,24 @@ +#include <config.h>
+#ifdef CONFIG_ARMADA_32BIT
+/ {
- soc {
u-boot,dm-pre-reloc;internal-regs {u-boot,dm-pre-reloc;};- };
+};
+&uart0 {
- u-boot,dm-pre-reloc;
+};
+#ifdef CONFIG_SPL_SPI +&spi0 {
- u-boot,dm-pre-reloc;
+}; +#endif
+#endif
Viele Grüße, Stefan Roese