On Monday 03 November 2008, 조기성 wrote:
I’m using ppc440Ep and using u-boot1.3.3
I’m using u-boot1.1.3 with Yosemite configuration.
Please use the latest version from the DENX git repository.
When I boot with Yosemite conf , it stops SDRAM:256 , it’ shows cpu, pci conf
So it most likely crashed upon relocation into SDRAM. So its an SDRAM configuration problem.
My New Board configuration is only different SDRAM Size and Flash Size.
Where can I modify my Yosemite configuration.
Init.S and Yosemite.h
Yosemite uses a board specific SDRAM init routine. I suggest that you use the common DDR2 init code by enabling it in your board config header (include/configs/board.h):
#define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0*/
You can also define CONFIG_SYS_SDRAM_TABLE if you have an uncommon SDRAM configuration. What's the difference of your SDRAM configuration?
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================