Connect up the clocks and the eDP driver to make these displays work with Tegra124-based devices.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v2: - Rebase on top of u-boot-dm
arch/arm/include/asm/arch-tegra124/display.h | 58 +++++ drivers/video/Kconfig | 8 + drivers/video/tegra124/Makefile | 2 + drivers/video/tegra124/display.c | 358 +++++++++++++++++++++++++++ drivers/video/tegra124/tegra124-lcd.c | 94 +++++++ 5 files changed, 520 insertions(+) create mode 100644 arch/arm/include/asm/arch-tegra124/display.h create mode 100644 drivers/video/tegra124/display.c create mode 100644 drivers/video/tegra124/tegra124-lcd.c
diff --git a/arch/arm/include/asm/arch-tegra124/display.h b/arch/arm/include/asm/arch-tegra124/display.h new file mode 100644 index 0000000..ca6644a --- /dev/null +++ b/arch/arm/include/asm/arch-tegra124/display.h @@ -0,0 +1,58 @@ +/* + * (C) Copyright 2010 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_TEGRA_DISPLAY_H +#define __ASM_ARCH_TEGRA_DISPLAY_H + +/** + * Register a new display based on device tree configuration. + * + * The frame buffer can be positioned by U-Boot or overriden by the fdt. + * You should pass in the U-Boot address here, and check the contents of + * struct fdt_disp_config to see what was actually chosen. + * + * @param blob Device tree blob + * @param default_lcd_base Default address of LCD frame buffer + * @return 0 if ok, -1 on error (unsupported bits per pixel) + */ +int tegra_display_probe(const void *blob, void *default_lcd_base); + +/** + * Return the current display configuration + * + * @return pointer to display configuration, or NULL if there is no valid + * config + */ +struct fdt_disp_config *tegra_display_get_config(void); + +/** + * Perform the next stage of the LCD init if it is time to do so. + * + * LCD init can be time-consuming because of the number of delays we need + * while waiting for the backlight power supply, etc. This function can + * be called at various times during U-Boot operation to advance the + * initialization of the LCD to the next stage if sufficient time has + * passed since the last stage. It keeps track of what stage it is up to + * and the time that it is permitted to move to the next stage. + * + * The final call should have wait=1 to complete the init. + * + * @param blob fdt blob containing LCD information + * @param wait 1 to wait until all init is complete, and then return + * 0 to return immediately, potentially doing nothing if it is + * not yet time for the next init. + */ +int tegra_lcd_check_next_stage(const void *blob, int wait); + +/** + * Set up the maximum LCD size so we can size the frame buffer. + * + * @param blob fdt blob containing LCD information + */ +void tegra_lcd_early_init(const void *blob); + +#endif /*__ASM_ARCH_TEGRA_DISPLAY_H*/ diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 62af63a..2544301 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -95,3 +95,11 @@ config DISPLAY_PORT eDP (Embedded DisplayPort) is a standard widely used in laptops to drive LCD panels. This framework provides support for enabling these displays where supported by the video hardware. + +config VIDEO_TEGRA124 + bool "Enable video support on Tegra124" + help + Tegra124 supports many video output options including eDP and + HDMI. At present only eDP is supported by U-Boot. This option + enables this support which can be used on devices which + have an eDP display connected. diff --git a/drivers/video/tegra124/Makefile b/drivers/video/tegra124/Makefile index 7e08ee9..52eedb0 100644 --- a/drivers/video/tegra124/Makefile +++ b/drivers/video/tegra124/Makefile @@ -4,5 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ #
+obj-y += display.o obj-y += dp.o obj-y += sor.o +obj-y += tegra124-lcd.o diff --git a/drivers/video/tegra124/display.c b/drivers/video/tegra124/display.c new file mode 100644 index 0000000..d36a6a8 --- /dev/null +++ b/drivers/video/tegra124/display.c @@ -0,0 +1,358 @@ +/* + * Copyright 2014 Google Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Extracted from Chromium coreboot commit 3f59b13d + */ + +#include <common.h> +#include <dm.h> +#include <edid.h> +#include <errno.h> +#include <displayport.h> +#include <edid.h> +#include <fdtdec.h> +#include <lcd.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/pwm.h> +#include <asm/arch-tegra/dc.h> +#include "displayport.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* return in 1000ths of a Hertz */ +static int tegra_dc_calc_refresh(const struct display_timing *timing) +{ + int h_total, v_total, refresh; + int pclk = timing->pixelclock.typ; + + h_total = timing->hactive.typ + timing->hfront_porch.typ + + timing->hback_porch.typ + timing->hsync_len.typ; + v_total = timing->vactive.typ + timing->vfront_porch.typ + + timing->vback_porch.typ + timing->vsync_len.typ; + if (!pclk || !h_total || !v_total) + return 0; + refresh = pclk / h_total; + refresh *= 1000; + refresh /= v_total; + + return refresh; +} + +static void print_mode(const struct display_timing *timing) +{ + int refresh = tegra_dc_calc_refresh(timing); + + debug("MODE:%dx%d@%d.%03uHz pclk=%d\n", + timing->hactive.typ, timing->vactive.typ, refresh / 1000, + refresh % 1000, timing->pixelclock.typ); +} + +static int update_display_mode(struct dc_ctlr *disp_ctrl, + const struct display_timing *timing) +{ + const int vref_to_sync = 1, href_to_sync = 1; + + print_mode(timing); + + writel(0x1, &disp_ctrl->disp.disp_timing_opt); + + writel(vref_to_sync << 16 | href_to_sync, + &disp_ctrl->disp.ref_to_sync); + + writel(timing->vsync_len.typ << 16 | timing->hsync_len.typ, + &disp_ctrl->disp.sync_width); + + writel(((timing->vback_porch.typ - vref_to_sync) << 16) | + timing->hback_porch.typ, &disp_ctrl->disp.back_porch); + + writel(((timing->vfront_porch.typ + vref_to_sync) << 16) | + timing->hfront_porch.typ, &disp_ctrl->disp.front_porch); + + writel(timing->hactive.typ | (timing->vactive.typ << 16), + &disp_ctrl->disp.disp_active); + + /** + * We want to use PLLD_out0, which is PLLD / 2: + * PixelClock = (PLLD / 2) / ShiftClockDiv / PixelClockDiv. + * + * Currently most panels work inside clock range 50MHz~100MHz, and PLLD + * has some requirements to have VCO in range 500MHz~1000MHz (see + * clock.c for more detail). To simplify calculation, we set + * PixelClockDiv to 1 and ShiftClockDiv to 1. In future these values + * may be calculated by clock_display, to allow wider frequency range. + * + * Note ShiftClockDiv is a 7.1 format value. + */ + const u32 shift_clock_div = 1; + writel((PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT) | + ((shift_clock_div - 1) * 2) << SHIFT_CLK_DIVIDER_SHIFT, + &disp_ctrl->disp.disp_clk_ctrl); + debug("%s: PixelClock=%u, ShiftClockDiv=%u\n", __func__, + timing->pixelclock.typ, shift_clock_div); + return 0; +} + +static int tegra_depth_for_bpp(int bpp) +{ + switch (bpp) { + case 32: + return COLOR_DEPTH_R8G8B8A8; + case 16: + return COLOR_DEPTH_B5G6R5; + default: + debug("Unsupported LCD bit depth"); + return -1; + } +} + +static int update_window(struct dc_ctlr *disp_ctrl, + u32 frame_buffer, int fb_bits_per_pixel, + const struct display_timing *timing) +{ + const u32 colour_white = 0xffffff; + int colour_depth; + u32 val; + + writel(WINDOW_A_SELECT, &disp_ctrl->cmd.disp_win_header); + + writel(((timing->vactive.typ << 16) | timing->hactive.typ), + &disp_ctrl->win.size); + writel(((timing->vactive.typ << 16) | + (timing->hactive.typ * fb_bits_per_pixel / 8)), + &disp_ctrl->win.prescaled_size); + writel(((timing->hactive.typ * fb_bits_per_pixel / 8 + 31) / + 32 * 32), &disp_ctrl->win.line_stride); + + colour_depth = tegra_depth_for_bpp(fb_bits_per_pixel); + if (colour_depth == -1) + return -EINVAL; + + writel(colour_depth, &disp_ctrl->win.color_depth); + + writel(frame_buffer, &disp_ctrl->winbuf.start_addr); + writel(0x1000 << V_DDA_INC_SHIFT | 0x1000 << H_DDA_INC_SHIFT, + &disp_ctrl->win.dda_increment); + + writel(colour_white, &disp_ctrl->disp.blend_background_color); + writel(CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT, + &disp_ctrl->cmd.disp_cmd); + + writel(WRITE_MUX_ACTIVE, &disp_ctrl->cmd.state_access); + + val = GENERAL_ACT_REQ | WIN_A_ACT_REQ; + val |= GENERAL_UPDATE | WIN_A_UPDATE; + writel(val, &disp_ctrl->cmd.state_ctrl); + + /* Enable win_a */ + val = readl(&disp_ctrl->win.win_opt); + writel(val | WIN_ENABLE, &disp_ctrl->win.win_opt); + + return 0; +} + +static int tegra_dc_init(struct dc_ctlr *disp_ctrl) +{ + /* do not accept interrupts during initialization */ + writel(0x00000000, &disp_ctrl->cmd.int_mask); + writel(WRITE_MUX_ASSEMBLY | READ_MUX_ASSEMBLY, + &disp_ctrl->cmd.state_access); + writel(WINDOW_A_SELECT, &disp_ctrl->cmd.disp_win_header); + writel(0x00000000, &disp_ctrl->win.win_opt); + writel(0x00000000, &disp_ctrl->win.byte_swap); + writel(0x00000000, &disp_ctrl->win.buffer_ctrl); + + writel(0x00000000, &disp_ctrl->win.pos); + writel(0x00000000, &disp_ctrl->win.h_initial_dda); + writel(0x00000000, &disp_ctrl->win.v_initial_dda); + writel(0x00000000, &disp_ctrl->win.dda_increment); + writel(0x00000000, &disp_ctrl->win.dv_ctrl); + + writel(0x01000000, &disp_ctrl->win.blend_layer_ctrl); + writel(0x00000000, &disp_ctrl->win.blend_match_select); + writel(0x00000000, &disp_ctrl->win.blend_nomatch_select); + writel(0x00000000, &disp_ctrl->win.blend_alpha_1bit); + + writel(0x00000000, &disp_ctrl->winbuf.start_addr_hi); + writel(0x00000000, &disp_ctrl->winbuf.addr_h_offset); + writel(0x00000000, &disp_ctrl->winbuf.addr_v_offset); + + writel(0x00000000, &disp_ctrl->com.crc_checksum); + writel(0x00000000, &disp_ctrl->com.pin_output_enb[0]); + writel(0x00000000, &disp_ctrl->com.pin_output_enb[1]); + writel(0x00000000, &disp_ctrl->com.pin_output_enb[2]); + writel(0x00000000, &disp_ctrl->com.pin_output_enb[3]); + writel(0x00000000, &disp_ctrl->disp.disp_signal_opt0); + + return 0; +} + +static void dump_config(int panel_bpp, struct display_timing *timing) +{ + printf("timing->hactive.typ = %d\n", timing->hactive.typ); + printf("timing->vactive.typ = %d\n", timing->vactive.typ); + printf("timing->pixelclock.typ = %d\n", timing->pixelclock.typ); + + printf("timing->hfront_porch.typ = %d\n", timing->hfront_porch.typ); + printf("timing->hsync_len.typ = %d\n", timing->hsync_len.typ); + printf("timing->hback_porch.typ = %d\n", timing->hback_porch.typ); + + printf("timing->vfront_porch.typ %d\n", timing->vfront_porch.typ); + printf("timing->vsync_len.typ = %d\n", timing->vsync_len.typ); + printf("timing->vback_porch.typ = %d\n", timing->vback_porch.typ); + + printf("panel_bits_per_pixel = %d\n", panel_bpp); +} + +static int display_update_config_from_edid(struct udevice *dp_dev, + int *panel_bppp, + struct display_timing *timing) +{ + u8 buf[EDID_SIZE]; + int bpc, ret; + + ret = display_port_read_edid(dp_dev, buf, sizeof(buf)); + if (ret < 0) + return ret; + ret = edid_get_timing(buf, ret, timing, &bpc); + if (ret) + return ret; + + /* Use this information if valid */ + if (bpc != -1) + *panel_bppp = bpc * 3; + + return 0; +} + +/* Somewhat torturous method */ +static int get_backlight_info(const void *blob, struct gpio_desc *vdd, + struct gpio_desc *enable, int *pwmp) +{ + int sor, panel, backlight, power; + const u32 *prop; + int len; + int ret; + + *pwmp = 0; + sor = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA124_SOR); + if (sor < 0) + return -ENOENT; + panel = fdtdec_lookup_phandle(blob, sor, "nvidia,panel"); + if (panel < 0) + return -ENOENT; + backlight = fdtdec_lookup_phandle(blob, panel, "backlight"); + if (backlight < 0) + return -ENOENT; + ret = gpio_request_by_name_nodev(blob, backlight, "enable-gpios", 0, + enable, GPIOD_IS_OUT); + if (ret) + return ret; + prop = fdt_getprop(blob, backlight, "pwms", &len); + if (!prop || len != 3 * sizeof(u32)) + return -EINVAL; + *pwmp = fdt32_to_cpu(prop[1]); + + power = fdtdec_lookup_phandle(blob, backlight, "power-supply"); + if (power < 0) + return -ENOENT; + ret = gpio_request_by_name_nodev(blob, power, "gpio", 0, vdd, + GPIOD_IS_OUT); + if (ret) + goto err; + + return 0; + +err: + dm_gpio_free(NULL, enable); + return ret; +} + +int display_init(void *lcdbase, int fb_bits_per_pixel, + struct display_timing *timing) +{ + struct dc_ctlr *dc_ctlr; + const void *blob = gd->fdt_blob; + struct udevice *dp_dev; + int panel_bpp = 18; /* default 18 bits per pixel */ + u32 plld_rate; + struct gpio_desc vdd_gpio, enable_gpio; + int pwm; + int node; + int ret; + + ret = uclass_get_device(UCLASS_DISPLAY_PORT, 0, &dp_dev); + if (ret) + return ret; + + node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA124_DC); + if (node < 0) + return -ENOENT; + dc_ctlr = (struct dc_ctlr *)fdtdec_get_addr(blob, node, "reg"); + if (fdtdec_decode_display_timing(blob, node, 0, timing)) + return -EINVAL; + + ret = display_update_config_from_edid(dp_dev, &panel_bpp, timing); + if (ret) { + debug("%s: Failed to decode EDID, using defaults\n", __func__); + dump_config(panel_bpp, timing); + } + + if (!get_backlight_info(blob, &vdd_gpio, &enable_gpio, &pwm)) { + dm_gpio_set_value(&vdd_gpio, 1); + debug("%s: backlight vdd setting gpio %08x to %d\n", + __func__, gpio_get_number(&vdd_gpio), 1); + } + + /* + * The plld is programmed with the assumption of the SHIFT_CLK_DIVIDER + * and PIXEL_CLK_DIVIDER are zero (divide by 1). See the + * update_display_mode() for detail. + */ + plld_rate = clock_set_display_rate(timing->pixelclock.typ * 2); + if (plld_rate == 0) { + printf("dc: clock init failed\n"); + return -EIO; + } else if (plld_rate != timing->pixelclock.typ * 2) { + debug("dc: plld rounded to %u\n", plld_rate); + timing->pixelclock.typ = plld_rate / 2; + } + + /* Init dc */ + ret = tegra_dc_init(dc_ctlr); + if (ret) { + debug("dc: init failed\n"); + return ret; + } + + /* Configure dc mode */ + ret = update_display_mode(dc_ctlr, timing); + if (ret) { + debug("dc: failed to configure display mode\n"); + return ret; + } + + /* Enable dp */ + ret = display_port_enable(dp_dev, panel_bpp, timing); + if (ret) + return ret; + + ret = update_window(dc_ctlr, (ulong)lcdbase, fb_bits_per_pixel, timing); + if (ret) + return ret; + + /* Set up Tegra PWM to drive the panel backlight */ + pwm_enable(pwm, 0, 220, 0x2e); + udelay(10 * 1000); + + if (dm_gpio_is_valid(&enable_gpio)) { + dm_gpio_set_value(&enable_gpio, 1); + debug("%s: backlight enable setting gpio %08x to %d\n", + __func__, gpio_get_number(&enable_gpio), 1); + } + + return 0; +} diff --git a/drivers/video/tegra124/tegra124-lcd.c b/drivers/video/tegra124/tegra124-lcd.c new file mode 100644 index 0000000..55f63b1 --- /dev/null +++ b/drivers/video/tegra124/tegra124-lcd.c @@ -0,0 +1,94 @@ +/* + * Copyright 2014 Google Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#include <common.h> +#include <errno.h> +#include <fdtdec.h> +#include <lcd.h> +#include <asm/gpio.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch/clock.h> +#include <asm/arch-tegra/dc.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +enum { + /* Maximum LCD size we support */ + LCD_MAX_WIDTH = 1920, + LCD_MAX_HEIGHT = 1200, + LCD_MAX_LOG2_BPP = 4, /* 2^4 = 16 bpp */ +}; + +vidinfo_t panel_info = { + /* Insert a value here so that we don't end up in the BSS */ + .vl_col = -1, +}; + +int tegra_lcd_check_next_stage(const void *blob, int wait) +{ + return 0; +} + +void tegra_lcd_early_init(const void *blob) +{ + /* + * Go with the maximum size for now. We will fix this up after + * relocation. These values are only used for memory alocation. + */ + panel_info.vl_col = LCD_MAX_WIDTH; + panel_info.vl_row = LCD_MAX_HEIGHT; + panel_info.vl_bpix = LCD_MAX_LOG2_BPP; +} + +static int tegra124_lcd_init(void *lcdbase) +{ + struct display_timing timing; + + clock_set_up_plldp(); + clock_adjust_periph_pll_div(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH, + 408000000, NULL); + + clock_enable(PERIPH_ID_HOST1X); + clock_enable(PERIPH_ID_DISP1); + clock_enable(PERIPH_ID_PWM); + clock_enable(PERIPH_ID_DPAUX); + clock_enable(PERIPH_ID_SOR0); + + udelay(2); + + reset_set_enable(PERIPH_ID_HOST1X, 0); + reset_set_enable(PERIPH_ID_DISP1, 0); + reset_set_enable(PERIPH_ID_PWM, 0); + reset_set_enable(PERIPH_ID_DPAUX, 0); + reset_set_enable(PERIPH_ID_SOR0, 0); + + display_init(lcdbase, 1 << LCD_BPP, &timing); + + panel_info.vl_col = roundup(timing.hactive.typ, 16); + panel_info.vl_row = timing.vactive.typ; + + lcd_set_flush_dcache(1); + + return 0; +} + +void lcd_ctrl_init(void *lcdbase) +{ + ulong start; + int ret; + + start = get_timer(0); + ret = tegra124_lcd_init(lcdbase); + debug("LCD init took %lu ms\n", get_timer(start)); + if (ret) + printf("%s: Error %d\n", __func__, ret); +} + +void lcd_enable(void) +{ +}