Now we toggle between SPI and NAND flash automatically if we claim the SPI bus. So we can get rid of this command.
Signed-off-by: Holger Brunck holger.brunck@keymile.com Signed-off-by: Valentin Longchamp valentin.longchamp@keymile.com cc: Gerlando Falauto gerlando.falauto@keymile.com cc: Prafulla Wadaskar prafulla@marvell.com --- board/keymile/km_arm/km_arm.c | 26 -------------------------- include/configs/km/km_arm.h | 5 ++--- 2 files changed, 2 insertions(+), 29 deletions(-)
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index dcecf83..10c9a5f 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -313,32 +313,6 @@ void board_spi_release_bus(struct spi_slave *slave) km_hw_spi_bus_claim(0); }
-#if defined(CONFIG_CMD_SF) -int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - if (argc < 2) - return cmd_usage(cmdtp); - - if ((strcmp(argv[1], "off") == 0)) { - printf("SPI FLASH disabled, NAND enabled\n"); - km_hw_spi_bus_claim(0); - } else if ((strcmp(argv[1], "on") == 0)) { - printf("SPI FLASH enabled, NAND disabled\n"); - km_hw_spi_bus_claim(1); - } else { - return cmd_usage(cmdtp); - } - - return 0; -} - -U_BOOT_CMD( - spitoggle, 2, 0, do_spi_toggle, - "En-/disable SPI FLASH access", - "<on|off> - Enable (on) or disable (off) SPI FLASH access\n" - ); -#endif - int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index e2e8793..edb8f4e 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -237,9 +237,8 @@ int get_scl(void);
#define CONFIG_KM_UPDATE_UBOOT \ "update=" \ - "spi on;sf probe 0;sf erase 0 50000;" \ - "sf write ${load_addr_r} 0 ${filesize};" \ - "spi off\0" + "sf probe 0;sf erase 0 50000;" \ + "sf write ${load_addr_r} 0 ${filesize};\0"
/* * Default environment variables