Dear Gerd,
In message 1413894504-26255-1-git-send-email-kraxel@redhat.com you wrote:
base[0] is saved, but only restored in case the ram test failed.
When posting a new version of a patch please always make sure to add a change log!
I'm afraid your patch breaks at least some boards; tested on TQM5200 board...
Before (v2014.10):
U-Boot 2014.10 (Oct 21 2014 - 15:59:47)
CPU: MPC5200B v2.2, Core v1.4 at 396 MHz Bus 132 MHz, IPB 132 MHz, PCI 66 MHz Board: TQM5200S (TQ-Components GmbH) on a STK52xx carrier board I2C: 85 kHz, ready DRAM: 64 MiB Flash: 32 MiB In: serial Out: serial Err: serial Net: FEC IDE: Bus 0: OK ...
With your patch:
U-Boot 2014.10-00001-g27030e7 (Oct 21 2014 - 15:45:12)
CPU: MPC5200B v2.2, Core v1.4 at 396 MHz Bus 132 MHz, IPB 132 MHz, PCI 66 MHz Board: TQM5200S (TQ-Components GmbH) on a STK52xx carrier board I2C: 85 kHz, ready DRAM: 1 GiB [board hangs here]
Note also the incorrect RAM size.
Sorry, but this is not a correct fix. NAK.
Best regards,
Wolfgang Denk