Re: [U-Boot] [PATCH 7/7 v7] ARM: Add support for S3C6400 based SMDK6400 board

1 Sep 2008


      Dear Guennadi Liakhovetski,
In message Pine.LNX.4.64.0808111732140.30591@axis700.grange you wrote:
...
SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
driver for it too. The board can also boot from the NOR flash, but due to
hardware limitations it can only address 64KiB on it, which is not enough
for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
Can you please check the compiler options? This is what I get with
ELDK 4.1 for ARM:
-> ./MAKEALL smdk6400
    cc1: error: invalid option 'eabi'
    cc1: error: invalid option 'string'
    ...
Best regards,
Wolfgang Denk
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"...all the  good  computer  designs  are  bootlegged;  the  formally
planned  products,  if  they  are built at all, are dogs!" - David E.
Lundstrom, "A Few Good Men From Univac", MIT Press, 1987