Hi Bin,
On Fri, 21 Jul 2023 at 10:12, Bin Meng bmeng.cn@gmail.com wrote:
At present this uses mtrr_add_request() & mtrr_commit() combination to program the MTRR for graphics memory. This usage has two major issues as below:
- mtrr_commit() will re-initialize all MTRR registers from index 0, using the settings previously added by mtrr_add_request() and saved in gd->arch.mtrr_req[], which won't cause any issue but is unnecessary
- The way such combination works is based on the assumption that U-Boot has full control with MTRR programming (e.g.: U-Boot without any blob that does all low-level initialization on its own, or using FSP2 which does not touch MTRR), but this is not the case with FSP. FSP programs some MTRRs during its execution but U-Boot does not have the settings saved in gd->arch.mtrr_req[] and when doing mtrr_commit() it will corrupt what was already programmed previously.
Correct this to use mtrr_set_next_var() instead.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
arch/x86/lib/fsp/fsp_graphics.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
Thanks for looking into this. The series works fine on link. I suspect it will be find on samus too, but I cannot test right now. Sadly minnowmax is also dead right now but I hope to fix it soon. I don't expect any problems there.
However, for coral, this first patch breaks the mtrrs. With master we get:
=> mtrr CPU 0: Reg Valid Write-type Base || Mask || Size || 0 Y Back 00000000fef00000 0000007ffff80000 0000000000080000 1 Y Back 00000000fef80000 0000007ffffc0000 0000000000040000 2 Y Back 0000000000000000 0000007f80000000 0000000080000000 3 Y Combine 00000000b0000000 0000007ff0000000 0000000010000000 4 Y Back 0000000100000000 0000007f80000000 0000000080000000 5 N Uncacheable 0000000000000000 0000000000000000 0000008000000000 6 N Uncacheable 0000000000000000 0000000000000000 0000008000000000 7 N Uncacheable 0000000000000000 0000000000000000 0000008000000000 8 N Uncacheable 0000000000000000 0000000000000000 0000008000000000 9 N Uncacheable 0000000000000000 0000000000000000 0000008000000000
with this patch on coral we get:
=> mtrr CPU 0: Reg Valid Write-type Base || Mask || Size || 0 Y Back 00000000fef00000 0000007ffff80000 0000000000080000 1 Y Back 00000000fef80000 0000007ffffc0000 0000000000040000 2 Y Combine 00000000b0000000 0000007ff0000000 0000000010000000 3 N Uncacheable 0000000000000000 0000000000000000 0000008000000000
At present coral expects to handle the MTRRs itself, and it seems that perhaps the APL FSPv2 does not? Do we need a new Kconfig for dealing with FSPv2 perhaps?
Regards, Simon