In u-boot there are two types of variables, local and persistent variables.
Persistent variables are assigned via "setenv", can be saved (the whole environment) via "saveenv", restored (to default values) via "env default -f".
Hush variables are assigned via "=" and can aren't saved.
Both are accessed via "$variable" or "${variable}"
What you are seeing is normal.
On 12/12/2015 03:53 PM, Pavel Machek wrote:
Hi!
I'm getting quite crazy behaviour of variables in recent u-boot:
VERSION = 2016 PATCHLEVEL = 01 SUBLEVEL = EXTRAVERSION = -rc1
Bytes transferred = 104656 (198d0 hex) => bootm_boot_mode=nonsec => echo $bootm_boot_mode nonsec => prinetenv bootm_boot_mode Unknown command 'prinetenv' - try 'help' => printenv bootm_boot_mode ## Error: "bootm_boot_mode" not defined => echo $bootm_boot_mode nonsec =>
What is going on there? C-level "getenv" fails on such variable, too.
bootm_boot_mode = '<NULL>'
Explicit setenv behaves as expected:
=> setenv bootm_boot_mode nonsec => echo $bootm_boot_mode nonsec => printenv bootm_boot_mode bootm_boot_mode=nonsec =>
Best regards,
Pavel