On 8/30/07, Michal Simek Monstr@seznam.cz wrote:
DESC: clean Makefile, change configuration setting
why? because XupV2p use new emac drivers
Signed-off-by: Michal Simek monstr@monstr.eu
diff --git a/board/xilinx/xupv2p/Makefile b/board/xilinx/xupv2p/Makefile index 9ab5633..99e7047 100644 --- a/board/xilinx/xupv2p/Makefile +++ b/board/xilinx/xupv2p/Makefile @@ -22,32 +22,17 @@ #
include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -$(shell mkdir -p $(obj)../xilinx_enet) -endif
-INCS := -I../common -I../xilinx_enet -CFLAGS += $(INCS) -HOST_CFLAGS += $(INCS)
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o \
../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \../common/xbasic_types.o ../common/xdma_channel.o \../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \../common/xversion.o \+COBJS = $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $^+$(LIB): $(obj).depend $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/xilinx/xupv2p/config.mk b/board/xilinx/xupv2p/config.mk index c07b0b3..eedfb24 100644 --- a/board/xilinx/xupv2p/config.mk +++ b/board/xilinx/xupv2p/config.mk @@ -25,8 +25,8 @@ # Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 #
-TEXT_BASE = 0x38000000 +TEXT_BASE = 0x30000000
+PLATFORM_CPPFLAGS += -mxl-pattern-compare PLATFORM_CPPFLAGS += -mno-xl-soft-mul -PLATFORM_CPPFLAGS += -mno-xl-soft-div -PLATFORM_CPPFLAGS += -mxl-barrel-shift +PLATFORM_CPPFLAGS += -mcpu=v5.00.c diff --git a/board/xilinx/xupv2p/xparameters.h b/board/xilinx/xupv2p/xparameters.h index a96c693..0bb7a80 100644 --- a/board/xilinx/xupv2p/xparameters.h +++ b/board/xilinx/xupv2p/xparameters.h @@ -28,17 +28,24 @@ /* System Clock Frequency */ #define XILINX_CLOCK_FREQ 100000000
+/* Microblaze is microblaze_0 */ +#define XILINX_USE_MSR_INSTR 1 +#define XILINX_PVR 0 +#define XILINX_FSL_NUMBER 0
/* Interrupt controller is opb_intc_0 */ #define XILINX_INTC_BASEADDR 0x41200000 -#define XILINX_INTC_NUM_INTR_INPUTS 11 +#define XILINX_INTC_NUM_INTR_INPUTS 7
/* Timer pheriphery is opb_timer_1 */ #define XILINX_TIMER_BASEADDR 0x41c00000 -#define XILINX_TIMER_IRQ 1 +#define XILINX_TIMER_IRQ 0
/* Uart pheriphery is RS232_Uart_1 */ -#define XILINX_UART_BASEADDR 0x40600000 -#define XILINX_UART_BAUDRATE 115200 +#define XILINX_UARTLITE_BASEADDR 0x40600000 +#define XILINX_UARTLITE_BAUDRATE 115200
+/* IIC doesn't exist */
/* GPIO is LEDs_4Bit*/ #define XILINX_GPIO_BASEADDR 0x40000000 @@ -51,14 +58,10 @@
/* Sysace Controller is SysACE_CompactFlash */ #define XILINX_SYSACE_BASEADDR 0x41800000 -#define XILINX_SYSACE_HIGHADDR 0x4180ffff #define XILINX_SYSACE_MEM_WIDTH 16
/* Ethernet controller is Ethernet_MAC */ -#define XPAR_XEMAC_NUM_INSTANCES 1 -#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0 -#define XPAR_OPB_ETHERNET_0_BASEADDR 0x40c00000 -#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0ffff -#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1 -#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1 -#define XPAR_OPB_ETHERNET_0_MII_EXIST 1 +#define XILINX_EMAC_BASEADDR 0x40c00000 +#define XILINX_EMAC_DMA_PRESENT 3 +#define XILINX_EMAC_HALF_DUPLEX_EXIST 1 +#define XILINX_EMAC_MII_EXIST 1 diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index 35001d7..006a132 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -31,13 +31,34 @@ #define CONFIG_XUPV2P 1
/* uart */ -#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR -#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE +#ifdef XILINX_UARTLITE_BASEADDR +#define XILINX_UARTLITE
CONFIG_XILINX_UARTLITE
+#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR +#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } +#else +#ifdef XILINX_UART16550_BASEADDR +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 4 +#define CONFIG_CONS_INDEX 1 +#define CFG_NS16550_COM1 XILINX_UART16550_BASEADDR +#define CFG_NS16550_CLK XILINX_UART16550_CLOCK_HZ
+#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 115200 } +#endif +#endif
/* ethernet */ -#define CONFIG_EMAC 1 -#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES +#ifdef XILINX_EMAC_BASEADDR +#define XILINX_EMAC 1
CONFIG_XLINX_EMAC
+#else +#ifdef XILINX_EMACLITE_BASEADDR +#define XILINX_EMACLITE 1
CONFIG_XILINX_EMACLITE... but you get the picture. :-)
Cheers, g.