Patch 66863b05 [cfi_flash: add support for Spansion flash PPB sector protection] introduced the PPB (Persistent Protection Bit) locking for Spansion chips. But right now the sector protection status (locked vs unlocked) is set to unlocked for all sectors upon bootup. The real sector protection status is ignored.
This patch now reads the current sector protection status and uses it for these AMD/Spansion flash chips.
Signed-off-by: Stefan Roese sr@denx.de Cc: Anatolij Gustschin agust@denx.de Cc: Holger Brunck holger.brunck@keymile.com --- v2: - Added reset command before issuing the autoselect command (FLASH_CMD_READ_ID). Otherwise STM flash chips didn't report the correct protection status (on a4m2k board) - Line length reduced (checkpatch warning)
drivers/mtd/cfi_flash.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index d865c40..045cf4a 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -2160,6 +2160,27 @@ ulong flash_get_size (phys_addr_t base, int banknum) FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT); break; + case CFI_CMDSET_AMD_EXTENDED: + case CFI_CMDSET_AMD_STANDARD: + if (!manufact_match(info, AMD_MANUFACT)) { + /* default: not protected */ + info->protect[sect_cnt] = 0; + break; + } + + /* Read protection (PPB) from sector */ + flash_write_cmd(info, 0, 0, + info->cmd_reset); + flash_unlock_seq(info, 0); + flash_write_cmd(info, 0, + info->addr_unlock1, + FLASH_CMD_READ_ID); + info->protect[sect_cnt] = + flash_isset( + info, sect_cnt, + FLASH_OFFSET_PROTECT, + FLASH_STATUS_PROTECT); + break; default: /* default: not protected */ info->protect[sect_cnt] = 0;