On 04/01/2016 01:13 AM, Mario Six wrote:
To enable DM on MPC85xx, we need pre-relocation malloc, which is implemented in this patch.
We also make sure that the IVORs are always 4-aligned on e500 to prevent alignment exceptions caused by code changes in start.S.
Signed-off-by: Mario Six mario.six@gdsys.cc Cc: York Sun york.sun@nxp.com Cc: Simon Glass sjg@chromium.org
v2:
- Correct IVOR alignment and remove nop hack
- Add sanity check for length of malloc area
arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 8 -------- arch/powerpc/cpu/mpc85xx/start.S | 28 ++++++++++++++++++++++++++++ include/ppc_asm.tmpl | 3 +++ 3 files changed, 31 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c index 235a635..e6e1688 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c @@ -82,7 +82,6 @@ void setup_ifc(void) void cpu_init_early_f(void *fdt) { u32 mas0, mas1, mas2, mas3, mas7;
- int i;
#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #endif @@ -95,13 +94,6 @@ void cpu_init_early_f(void *fdt) /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
- /*
* Clear initial global data* we don't use memset so we can share this code with NAND_SPL*/- for (i = 0; i < sizeof(gd_t); i++)
((char *)gd)[i] = 0;
I would appreciate a comment here to explain GD had been zeroed by ...
#ifdef CONFIG_QEMU_E500 /* * CONFIG_SYS_CCSRBAR_PHYS below may use gd->fdt_blob on ePAPR systems, diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index d867e2a..cc4cf5f 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1152,6 +1152,34 @@ _start_cont: /* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/ lis r3,(CONFIG_SYS_INIT_RAM_ADDR)@h ori r3,r3,((CONFIG_SYS_INIT_SP_OFFSET-16)&~0xf)@l /* Align to 16 */
+#ifdef CONFIG_SYS_MALLOC_F_LEN
+#if CONFIG_SYS_MALLOC_F_LEN + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE +#error "CONFIG_SYS_MALLOC_F_LEN too large to fit into initial RAM." +#endif
I am not an expert on linking. I wonder if there can be a way to determine the max depth of stack. If we can, a check here would be great. If we can't, we have to live with it.
- /* Leave 16+ byte for back chain termination and NULL return address */
- subi r3,r3,((CONFIG_SYS_MALLOC_F_LEN+16+15)&~0xf)
- /* End of RAM */
- lis r4,(CONFIG_SYS_INIT_RAM_ADDR)@h
- ori r4,r4,(CONFIG_SYS_INIT_RAM_SIZE)@l
- li r0,0
+1: subi r4,r4,4
- stw r0,0(r4)
- cmplw r4,r3
- bne 1b
- lis r4,(CONFIG_SYS_INIT_RAM_ADDR)@h
- ori r4,r4,(CONFIG_SYS_GBL_DATA_OFFSET)@l
- addi r3,r3,16 /* Pre-relocation malloc area */
- stw r3,GD_MALLOC_BASE(r4)
- subi r3,r3,16
+#endif li r0,0 stw r0,0(r3) /* Terminate Back Chain */ stw r0,+4(r3) /* NULL return address. */
I was thinking to add .align 4 before the start of exception vectors.
York
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index ba166eb..379c493 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -263,12 +263,14 @@ b transfer_to_handler
#define STD_EXCEPTION(n, label, hdlr) \ +.align 4; \ label: \ EXCEPTION_PROLOG(SRR0, SRR1); \ addi r3,r1,STACK_FRAME_OVERHEAD; \ EXC_XFER_TEMPLATE(n, label, hdlr, MSR_KERNEL, NOCOPY) \
#define CRIT_EXCEPTION(n, label, hdlr) \ +.align 4; \ label: \ EXCEPTION_PROLOG(CSRR0, CSRR1); \ addi r3,r1,STACK_FRAME_OVERHEAD; \ @@ -276,6 +278,7 @@ label: \ MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \
#define MCK_EXCEPTION(n, label, hdlr) \ +.align 4; \ label: \ EXCEPTION_PROLOG(MCSRR0, MCSRR1); \ addi r3,r1,STACK_FRAME_OVERHEAD; \ -- 2.7.0.GIT