From: Stefan Herbrechtsmeier stefan.herbrechtsmeier@weidmueller.de
Move the zynq to clock framework and remove unused functions as well as the CONFIG_ZYNQ_PS_CLK_FREQ configuration.
Signed-off-by: Stefan Herbrechtsmeier stefan.herbrechtsmeier@weidmueller.com ---
arch/arm/Kconfig | 2 + arch/arm/dts/zynq-7000.dtsi | 2 + arch/arm/mach-zynq/clk.c | 650 +++------------------------- arch/arm/mach-zynq/cpu.c | 1 - arch/arm/mach-zynq/include/mach/clk.h | 5 - arch/arm/mach-zynq/include/mach/sys_proto.h | 1 - arch/arm/mach-zynq/slcr.c | 22 - arch/arm/mach-zynq/timer.c | 2 - drivers/net/zynq_gem.c | 13 - drivers/serial/serial_zynq.c | 6 +- include/configs/topic_miami.h | 2 - include/configs/zynq_zybo.h | 3 - scripts/config_whitelist.txt | 1 - 13 files changed, 55 insertions(+), 655 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 38080c0..f9daa99 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -631,6 +631,8 @@ config ARCH_ZYNQ select SPL_SEPARATE_BSS if SPL select DM_USB if USB select BLK + select CLK + select SPL_CLK
config ARCH_ZYNQMP bool "Support Xilinx ZynqMP Platform" diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi index 668f54e..2464830 100644 --- a/arch/arm/dts/zynq-7000.dtsi +++ b/arch/arm/dts/zynq-7000.dtsi @@ -250,12 +250,14 @@ };
slcr: slcr@f8000000 { + u-boot,dm-pre-reloc; #address-cells = <1>; #size-cells = <1>; compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd"; reg = <0xF8000000 0x1000>; ranges; clkc: clkc@100 { + u-boot,dm-pre-reloc; #clock-cells = <1>; compatible = "xlnx,ps7-clkc"; fclk-enable = <0>; diff --git a/arch/arm/mach-zynq/clk.c b/arch/arm/mach-zynq/clk.c index 570ebd7..7283a94 100644 --- a/arch/arm/mach-zynq/clk.c +++ b/arch/arm/mach-zynq/clk.c @@ -4,77 +4,13 @@ * * SPDX-License-Identifier: GPL-2.0+ */ +#include <clk.h> #include <common.h> -#include <errno.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> +#include <dm.h> #include <asm/arch/clk.h>
-/* Board oscillator frequency */ -#ifndef CONFIG_ZYNQ_PS_CLK_FREQ -# define CONFIG_ZYNQ_PS_CLK_FREQ 33333333UL -#endif - -/* Register bitfield defines */ -#define PLLCTRL_FBDIV_MASK 0x7f000 -#define PLLCTRL_FBDIV_SHIFT 12 -#define PLLCTRL_BPFORCE_MASK (1 << 4) -#define PLLCTRL_PWRDWN_MASK 2 -#define PLLCTRL_PWRDWN_SHIFT 1 -#define PLLCTRL_RESET_MASK 1 -#define PLLCTRL_RESET_SHIFT 0 - -#define ZYNQ_CLK_MAXDIV 0x3f -#define CLK_CTRL_DIV1_SHIFT 20 -#define CLK_CTRL_DIV1_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT) -#define CLK_CTRL_DIV0_SHIFT 8 -#define CLK_CTRL_DIV0_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT) -#define CLK_CTRL_SRCSEL_SHIFT 4 -#define CLK_CTRL_SRCSEL_MASK (0x3 << CLK_CTRL_SRCSEL_SHIFT) - -#define CLK_CTRL_DIV2X_SHIFT 26 -#define CLK_CTRL_DIV2X_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV2X_SHIFT) -#define CLK_CTRL_DIV3X_SHIFT 20 -#define CLK_CTRL_DIV3X_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV3X_SHIFT) - -#define ZYNQ_CLKMUX_SEL_0 0 -#define ZYNQ_CLKMUX_SEL_1 1 -#define ZYNQ_CLKMUX_SEL_2 2 -#define ZYNQ_CLKMUX_SEL_3 3 - DECLARE_GLOBAL_DATA_PTR;
-struct clk; - -/** - * struct zynq_clk_ops: - * @set_rate: Function pointer to set_rate() implementation - * @get_rate: Function pointer to get_rate() implementation - */ -struct zynq_clk_ops { - int (*set_rate)(struct clk *clk, unsigned long rate); - unsigned long (*get_rate)(struct clk *clk); -}; - -/** - * struct clk: - * @frequency: Currenct frequency - * @parent: Parent clock - * @flags: Clock flags - * @reg: Clock control register - * @ops: Clock operations - */ -struct clk { - unsigned long frequency; - enum zynq_clk parent; - unsigned int flags; - u32 *reg; - struct zynq_clk_ops ops; -}; -#define ZYNQ_CLK_FLAGS_HAS_2_DIVS 1 - -static struct clk clks[clk_max]; - static const char * const clk_names[clk_max] = { "armpll", "ddrpll", "iopll", "cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x", @@ -90,548 +26,43 @@ static const char * const clk_names[clk_max] = { };
/** - * __zynq_clk_cpu_get_parent() - Decode clock multiplexer - * @srcsel: Mux select value - * Returns the clock identifier associated with the selected mux input. - */ -static int __zynq_clk_cpu_get_parent(unsigned int srcsel) -{ - unsigned int ret; - - switch (srcsel) { - case ZYNQ_CLKMUX_SEL_0: - case ZYNQ_CLKMUX_SEL_1: - ret = armpll_clk; - break; - case ZYNQ_CLKMUX_SEL_2: - ret = ddrpll_clk; - break; - case ZYNQ_CLKMUX_SEL_3: - ret = iopll_clk; - break; - default: - ret = armpll_clk; - break; - } - - return ret; -} - -/** - * ddr2x_get_rate() - Get clock rate of DDR2x clock - * @clk: Clock handle - * Returns the current clock rate of @clk. - */ -static unsigned long ddr2x_get_rate(struct clk *clk) -{ - u32 clk_ctrl = readl(clk->reg); - u32 div = (clk_ctrl & CLK_CTRL_DIV2X_MASK) >> CLK_CTRL_DIV2X_SHIFT; - - return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div); -} - -/** - * ddr3x_get_rate() - Get clock rate of DDR3x clock - * @clk: Clock handle - * Returns the current clock rate of @clk. - */ -static unsigned long ddr3x_get_rate(struct clk *clk) -{ - u32 clk_ctrl = readl(clk->reg); - u32 div = (clk_ctrl & CLK_CTRL_DIV3X_MASK) >> CLK_CTRL_DIV3X_SHIFT; - - return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div); -} - -static void init_ddr_clocks(void) -{ - u32 div0, div1; - unsigned long prate = zynq_clk_get_rate(ddrpll_clk); - u32 clk_ctrl = readl(&slcr_base->ddr_clk_ctrl); - - /* DDR2x */ - clks[ddr2x_clk].reg = &slcr_base->ddr_clk_ctrl; - clks[ddr2x_clk].parent = ddrpll_clk; - clks[ddr2x_clk].frequency = ddr2x_get_rate(&clks[ddr2x_clk]); - clks[ddr2x_clk].ops.get_rate = ddr2x_get_rate; - - /* DDR3x */ - clks[ddr3x_clk].reg = &slcr_base->ddr_clk_ctrl; - clks[ddr3x_clk].parent = ddrpll_clk; - clks[ddr3x_clk].frequency = ddr3x_get_rate(&clks[ddr3x_clk]); - clks[ddr3x_clk].ops.get_rate = ddr3x_get_rate; - - /* DCI */ - clk_ctrl = readl(&slcr_base->dci_clk_ctrl); - div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; - div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT; - clks[dci_clk].reg = &slcr_base->dci_clk_ctrl; - clks[dci_clk].parent = ddrpll_clk; - clks[dci_clk].frequency = DIV_ROUND_CLOSEST( - DIV_ROUND_CLOSEST(prate, div0), div1); - - gd->bd->bi_ddr_freq = clks[ddr3x_clk].frequency / 1000000; -} - -static void init_cpu_clocks(void) -{ - int clk_621; - u32 reg, div, srcsel; - enum zynq_clk parent; - - reg = readl(&slcr_base->arm_clk_ctrl); - clk_621 = readl(&slcr_base->clk_621_true) & 1; - div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; - srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT; - parent = __zynq_clk_cpu_get_parent(srcsel); - - /* cpu clocks */ - clks[cpu_6or4x_clk].reg = &slcr_base->arm_clk_ctrl; - clks[cpu_6or4x_clk].parent = parent; - clks[cpu_6or4x_clk].frequency = DIV_ROUND_CLOSEST( - zynq_clk_get_rate(parent), div); - - clks[cpu_3or2x_clk].reg = &slcr_base->arm_clk_ctrl; - clks[cpu_3or2x_clk].parent = cpu_6or4x_clk; - clks[cpu_3or2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / 2; - - clks[cpu_2x_clk].reg = &slcr_base->arm_clk_ctrl; - clks[cpu_2x_clk].parent = cpu_6or4x_clk; - clks[cpu_2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / - (2 + clk_621); - - clks[cpu_1x_clk].reg = &slcr_base->arm_clk_ctrl; - clks[cpu_1x_clk].parent = cpu_6or4x_clk; - clks[cpu_1x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / - (4 + 2 * clk_621); -} - -/** - * periph_calc_two_divs() - Calculate clock dividers - * @cur_rate: Current clock rate - * @tgt_rate: Target clock rate - * @prate: Parent clock rate - * @div0: First divider (output) - * @div1: Second divider (output) - * Returns the actual clock rate possible. - * - * Calculates clock dividers for clocks with two 6-bit dividers. - */ -static unsigned long periph_calc_two_divs(unsigned long cur_rate, - unsigned long tgt_rate, unsigned long prate, u32 *div0, - u32 *div1) -{ - long err, best_err = (long)(~0UL >> 1); - unsigned long rate, best_rate = 0; - u32 d0, d1; - - for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) { - for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) { - rate = DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(prate, d0), - d1); - err = abs(rate - tgt_rate); - - if (err < best_err) { - *div0 = d0; - *div1 = d1; - best_err = err; - best_rate = rate; - } - } - } - - return best_rate; -} - -/** - * zynq_clk_periph_set_rate() - Set clock rate - * @clk: Handle of the peripheral clock - * @rate: New clock rate - * Sets the clock frequency of @clk to @rate. Returns zero on success. - */ -static int zynq_clk_periph_set_rate(struct clk *clk, - unsigned long rate) -{ - u32 ctrl, div0 = 0, div1 = 0; - unsigned long prate, new_rate, cur_rate = clk->frequency; - - ctrl = readl(clk->reg); - prate = zynq_clk_get_rate(clk->parent); - ctrl &= ~CLK_CTRL_DIV0_MASK; - - if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS) { - ctrl &= ~CLK_CTRL_DIV1_MASK; - new_rate = periph_calc_two_divs(cur_rate, rate, prate, &div0, - &div1); - ctrl |= div1 << CLK_CTRL_DIV1_SHIFT; - } else { - div0 = DIV_ROUND_CLOSEST(prate, rate); - div0 &= ZYNQ_CLK_MAXDIV; - new_rate = DIV_ROUND_CLOSEST(rate, div0); - } - - /* write new divs to hardware */ - ctrl |= div0 << CLK_CTRL_DIV0_SHIFT; - writel(ctrl, clk->reg); - - /* update frequency in clk framework */ - clk->frequency = new_rate; - - return 0; -} - -/** - * zynq_clk_periph_get_rate() - Get clock rate - * @clk: Handle of the peripheral clock - * Returns the current clock rate of @clk. - */ -static unsigned long zynq_clk_periph_get_rate(struct clk *clk) -{ - u32 clk_ctrl = readl(clk->reg); - u32 div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; - u32 div1 = 1; - - if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS) - div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT; - - /* a register value of zero == division by 1 */ - if (!div0) - div0 = 1; - if (!div1) - div1 = 1; - - return - DIV_ROUND_CLOSEST( - DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div0), - div1); -} - -/** - * __zynq_clk_periph_get_parent() - Decode clock multiplexer - * @srcsel: Mux select value - * Returns the clock identifier associated with the selected mux input. - */ -static enum zynq_clk __zynq_clk_periph_get_parent(u32 srcsel) -{ - switch (srcsel) { - case ZYNQ_CLKMUX_SEL_0: - case ZYNQ_CLKMUX_SEL_1: - return iopll_clk; - case ZYNQ_CLKMUX_SEL_2: - return armpll_clk; - case ZYNQ_CLKMUX_SEL_3: - return ddrpll_clk; - default: - return 0; - } -} - -/** - * zynq_clk_periph_get_parent() - Decode clock multiplexer - * @clk: Clock handle - * Returns the clock identifier associated with the selected mux input. - */ -static enum zynq_clk zynq_clk_periph_get_parent(struct clk *clk) -{ - u32 clk_ctrl = readl(clk->reg); - u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT; - - return __zynq_clk_periph_get_parent(srcsel); -} - -/** - * zynq_clk_register_periph_clk() - Set up a peripheral clock with the framework - * @clk: Pointer to struct clk for the clock - * @ctrl: Clock control register - * @two_divs: Indicates whether the clock features one or two dividers - */ -static int zynq_clk_register_periph_clk(struct clk *clk, u32 *ctrl, - bool two_divs) -{ - clk->reg = ctrl; - if (two_divs) - clk->flags = ZYNQ_CLK_FLAGS_HAS_2_DIVS; - clk->parent = zynq_clk_periph_get_parent(clk); - clk->frequency = zynq_clk_periph_get_rate(clk); - clk->ops.get_rate = zynq_clk_periph_get_rate; - clk->ops.set_rate = zynq_clk_periph_set_rate; - - return 0; -} - -static void init_periph_clocks(void) -{ - zynq_clk_register_periph_clk(&clks[gem0_clk], - &slcr_base->gem0_clk_ctrl, 1); - zynq_clk_register_periph_clk(&clks[gem1_clk], - &slcr_base->gem1_clk_ctrl, 1); - - zynq_clk_register_periph_clk(&clks[smc_clk], - &slcr_base->smc_clk_ctrl, 0); - - zynq_clk_register_periph_clk(&clks[lqspi_clk], - &slcr_base->lqspi_clk_ctrl, 0); - - zynq_clk_register_periph_clk(&clks[sdio0_clk], - &slcr_base->sdio_clk_ctrl, 0); - zynq_clk_register_periph_clk(&clks[sdio1_clk], - &slcr_base->sdio_clk_ctrl, 0); - - zynq_clk_register_periph_clk(&clks[spi0_clk], - &slcr_base->spi_clk_ctrl, 0); - zynq_clk_register_periph_clk(&clks[spi1_clk], - &slcr_base->spi_clk_ctrl, 0); - - zynq_clk_register_periph_clk(&clks[uart0_clk], - &slcr_base->uart_clk_ctrl, 0); - zynq_clk_register_periph_clk(&clks[uart1_clk], - &slcr_base->uart_clk_ctrl, 0); - - zynq_clk_register_periph_clk(&clks[dbg_trc_clk], - &slcr_base->dbg_clk_ctrl, 0); - zynq_clk_register_periph_clk(&clks[dbg_apb_clk], - &slcr_base->dbg_clk_ctrl, 0); - - zynq_clk_register_periph_clk(&clks[pcap_clk], - &slcr_base->pcap_clk_ctrl, 0); - - zynq_clk_register_periph_clk(&clks[fclk0_clk], - &slcr_base->fpga0_clk_ctrl, 1); - zynq_clk_register_periph_clk(&clks[fclk1_clk], - &slcr_base->fpga1_clk_ctrl, 1); - zynq_clk_register_periph_clk(&clks[fclk2_clk], - &slcr_base->fpga2_clk_ctrl, 1); - zynq_clk_register_periph_clk(&clks[fclk3_clk], - &slcr_base->fpga3_clk_ctrl, 1); -} - -/** - * zynq_clk_register_aper_clk() - Set up a APER clock with the framework - * @clk: Pointer to struct clk for the clock - * @ctrl: Clock control register - */ -static void zynq_clk_register_aper_clk(struct clk *clk, u32 *ctrl) -{ - clk->reg = ctrl; - clk->parent = cpu_1x_clk; - clk->frequency = zynq_clk_get_rate(clk->parent); -} - -static void init_aper_clocks(void) -{ - zynq_clk_register_aper_clk(&clks[usb0_aper_clk], - &slcr_base->aper_clk_ctrl); - zynq_clk_register_aper_clk(&clks[usb1_aper_clk], - &slcr_base->aper_clk_ctrl); - - zynq_clk_register_aper_clk(&clks[gem0_aper_clk], - &slcr_base->aper_clk_ctrl); - zynq_clk_register_aper_clk(&clks[gem1_aper_clk], - &slcr_base->aper_clk_ctrl); - - zynq_clk_register_aper_clk(&clks[sdio0_aper_clk], - &slcr_base->aper_clk_ctrl); - zynq_clk_register_aper_clk(&clks[sdio1_aper_clk], - &slcr_base->aper_clk_ctrl); - - zynq_clk_register_aper_clk(&clks[spi0_aper_clk], - &slcr_base->aper_clk_ctrl); - zynq_clk_register_aper_clk(&clks[spi1_aper_clk], - &slcr_base->aper_clk_ctrl); - - zynq_clk_register_aper_clk(&clks[can0_aper_clk], - &slcr_base->aper_clk_ctrl); - zynq_clk_register_aper_clk(&clks[can1_aper_clk], - &slcr_base->aper_clk_ctrl); - - zynq_clk_register_aper_clk(&clks[i2c0_aper_clk], - &slcr_base->aper_clk_ctrl); - zynq_clk_register_aper_clk(&clks[i2c1_aper_clk], - &slcr_base->aper_clk_ctrl); - - zynq_clk_register_aper_clk(&clks[uart0_aper_clk], - &slcr_base->aper_clk_ctrl); - zynq_clk_register_aper_clk(&clks[uart1_aper_clk], - &slcr_base->aper_clk_ctrl); - - zynq_clk_register_aper_clk(&clks[gpio_aper_clk], - &slcr_base->aper_clk_ctrl); - - zynq_clk_register_aper_clk(&clks[lqspi_aper_clk], - &slcr_base->aper_clk_ctrl); - - zynq_clk_register_aper_clk(&clks[smc_aper_clk], - &slcr_base->aper_clk_ctrl); -} - -/** - * __zynq_clk_pll_get_rate() - Get PLL rate - * @addr: Address of the PLL's control register - * Returns the current PLL output rate. - */ -static unsigned long __zynq_clk_pll_get_rate(u32 *addr) -{ - u32 reg, mul, bypass; - - reg = readl(addr); - bypass = reg & PLLCTRL_BPFORCE_MASK; - if (bypass) - mul = 1; - else - mul = (reg & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT; - - return CONFIG_ZYNQ_PS_CLK_FREQ * mul; -} - -/** - * zynq_clk_pll_get_rate() - Get PLL rate - * @pll: Handle of the PLL - * Returns the current clock rate of @pll. - */ -static unsigned long zynq_clk_pll_get_rate(struct clk *pll) -{ - return __zynq_clk_pll_get_rate(pll->reg); -} - -/** - * zynq_clk_register_pll() - Set up a PLL with the framework - * @clk: Pointer to struct clk for the PLL - * @ctrl: PLL control register - * @prate: PLL input clock rate - */ -static void zynq_clk_register_pll(struct clk *clk, u32 *ctrl, - unsigned long prate) -{ - clk->reg = ctrl; - clk->frequency = zynq_clk_pll_get_rate(clk); - clk->ops.get_rate = zynq_clk_pll_get_rate; -} - -/** - * clkid_2_register() - Get clock control register - * @id: Clock identifier of one of the PLLs - * Returns the address of the requested PLL's control register. - */ -static u32 *clkid_2_register(enum zynq_clk id) -{ - switch (id) { - case armpll_clk: - return &slcr_base->arm_pll_ctrl; - case ddrpll_clk: - return &slcr_base->ddr_pll_ctrl; - case iopll_clk: - return &slcr_base->io_pll_ctrl; - default: - return &slcr_base->io_pll_ctrl; - } -} - -/* API */ -/** - * zynq_clk_early_init() - Early init for the clock framework - * - * This function is called from before relocation and sets up the CPU clock - * frequency in the global data struct. - */ -void zynq_clk_early_init(void) -{ - u32 reg = readl(&slcr_base->arm_clk_ctrl); - u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; - u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT; - enum zynq_clk parent = __zynq_clk_cpu_get_parent(srcsel); - u32 *pllreg = clkid_2_register(parent); - unsigned long prate = __zynq_clk_pll_get_rate(pllreg); - - if (!div) - div = 1; - - gd->cpu_clk = DIV_ROUND_CLOSEST(prate, div); -} - -/** - * get_uart_clk() - Get UART input frequency - * @dev_index: UART ID - * Returns UART input clock frequency in Hz. - * - * Compared to zynq_clk_get_rate() this function is designed to work before - * relocation and can be called when the serial UART is set up. - */ -unsigned long get_uart_clk(int dev_index) -{ - u32 reg = readl(&slcr_base->uart_clk_ctrl); - u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; - u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT; - enum zynq_clk parent = __zynq_clk_periph_get_parent(srcsel); - u32 *pllreg = clkid_2_register(parent); - unsigned long prate = __zynq_clk_pll_get_rate(pllreg); - - if (!div) - div = 1; - - return DIV_ROUND_CLOSEST(prate, div); -} - -/** - * set_cpu_clk_info() - Initialize clock framework - * Always returns zero. + * set_cpu_clk_info() - Setup clock information * * This function is called from common code after relocation and sets up the - * clock framework. The framework must not be used before this function had been - * called. + * clock information. */ int set_cpu_clk_info(void) { - zynq_clk_register_pll(&clks[armpll_clk], &slcr_base->arm_pll_ctrl, - CONFIG_ZYNQ_PS_CLK_FREQ); - zynq_clk_register_pll(&clks[ddrpll_clk], &slcr_base->ddr_pll_ctrl, - CONFIG_ZYNQ_PS_CLK_FREQ); - zynq_clk_register_pll(&clks[iopll_clk], &slcr_base->io_pll_ctrl, - CONFIG_ZYNQ_PS_CLK_FREQ); - - init_ddr_clocks(); - init_cpu_clocks(); - init_periph_clocks(); - init_aper_clocks(); - - gd->bd->bi_arm_freq = gd->cpu_clk / 1000000; + struct clk clk; + struct udevice *dev; + ulong rate; + int i, ret; + + ret = uclass_get_device_by_driver(UCLASS_CLK, + DM_GET_DRIVER(zynq_clk), &dev); + if (ret) + return ret; + + for (i = 0; i < 2; i++) { + clk.id = i ? ddr3x_clk : cpu_6or4x_clk; + ret = clk_request(dev, &clk); + if (ret < 0) + return ret; + + rate = clk_get_rate(&clk) / 1000000; + if (i) + gd->bd->bi_ddr_freq = rate; + else + gd->bd->bi_arm_freq = rate; + + clk_free(&clk); + } gd->bd->bi_dsp_freq = 0;
return 0; }
/** - * zynq_clk_get_rate() - Get clock rate - * @clk: Clock identifier - * Returns the current clock rate of @clk on success or zero for an invalid - * clock id. - */ -unsigned long zynq_clk_get_rate(enum zynq_clk clk) -{ - if (clk < 0 || clk >= clk_max) - return 0; - - return clks[clk].frequency; -} - -/** - * zynq_clk_set_rate() - Set clock rate - * @clk: Clock identifier - * @rate: Requested clock rate - * Passes on the return value from the clock's set_rate() function or negative - * errno. - */ -int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate) -{ - if (clk < 0 || clk >= clk_max) - return -ENODEV; - - if (clks[clk].ops.set_rate) - return clks[clk].ops.set_rate(&clks[clk], rate); - - return -ENXIO; -} - -/** * soc_clk_dump() - Print clock frequencies * Returns zero on success * @@ -639,13 +70,32 @@ int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate) */ int soc_clk_dump(void) { - int i; + struct udevice *dev; + int i, ret; + + ret = uclass_get_device_by_driver(UCLASS_CLK, + DM_GET_DRIVER(zynq_clk), &dev); + if (ret) + return ret;
printf("clk\t\tfrequency\n"); for (i = 0; i < clk_max; i++) { const char *name = clk_names[i]; - if (name) - printf("%10s%20lu\n", name, zynq_clk_get_rate(i)); + if (name) { + struct clk clk; + unsigned long rate; + + clk.id = i; + ret = clk_request(dev, &clk); + if (ret < 0) + return ret; + + rate = clk_get_rate(&clk); + + clk_free(&clk); + + printf("%10s%20lu\n", name, rate); + } }
return 0; diff --git a/arch/arm/mach-zynq/cpu.c b/arch/arm/mach-zynq/cpu.c index ba9171e..ee1c1a9 100644 --- a/arch/arm/mach-zynq/cpu.c +++ b/arch/arm/mach-zynq/cpu.c @@ -35,7 +35,6 @@ int arch_cpu_init(void) writel(0xC, &slcr_base->ddr_urgent); #endif #endif - zynq_clk_early_init(); zynq_slcr_lock();
return 0; diff --git a/arch/arm/mach-zynq/include/mach/clk.h b/arch/arm/mach-zynq/include/mach/clk.h index 5c2758a..8a039ae 100644 --- a/arch/arm/mach-zynq/include/mach/clk.h +++ b/arch/arm/mach-zynq/include/mach/clk.h @@ -20,9 +20,4 @@ enum zynq_clk { uart0_aper_clk, uart1_aper_clk, gpio_aper_clk, lqspi_aper_clk, smc_aper_clk, swdt_clk, dbg_trc_clk, dbg_apb_clk, clk_max};
-void zynq_clk_early_init(void); -int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate); -unsigned long zynq_clk_get_rate(enum zynq_clk clk); -unsigned long get_uart_clk(int dev_id); - #endif diff --git a/arch/arm/mach-zynq/include/mach/sys_proto.h b/arch/arm/mach-zynq/include/mach/sys_proto.h index 44c9b50..67238e7 100644 --- a/arch/arm/mach-zynq/include/mach/sys_proto.h +++ b/arch/arm/mach-zynq/include/mach/sys_proto.h @@ -10,7 +10,6 @@ extern void zynq_slcr_lock(void); extern void zynq_slcr_unlock(void); extern void zynq_slcr_cpu_reset(void); -extern void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate); extern void zynq_slcr_devcfg_disable(void); extern void zynq_slcr_devcfg_enable(void); extern u32 zynq_slcr_get_boot_mode(void); diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index c1129cd..2a207ae 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -9,7 +9,6 @@ #include <malloc.h> #include <asm/arch/hardware.h> #include <asm/arch/sys_proto.h> -#include <asm/arch/clk.h>
#define SLCR_LOCK_MAGIC 0x767B #define SLCR_UNLOCK_MAGIC 0xDF0D @@ -124,27 +123,6 @@ void zynq_slcr_cpu_reset(void) writel(1, &slcr_base->pss_rst_ctrl); }
-/* Setup clk for network */ -void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate) -{ - int ret; - - zynq_slcr_unlock(); - - if (gem_id > 1) { - printf("Non existing GEM id %d\n", gem_id); - goto out; - } - - ret = zynq_clk_set_rate(gem0_clk + gem_id, clk_rate); - if (ret) - goto out; - - udelay(100000); -out: - zynq_slcr_lock(); -} - void zynq_slcr_devcfg_disable(void) { u32 reg_val; diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c index 0335cbe..b1bb3b8 100644 --- a/arch/arm/mach-zynq/timer.c +++ b/arch/arm/mach-zynq/timer.c @@ -61,7 +61,6 @@ int timer_init(void) (TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) | SCUTIMER_CONTROL_ENABLE_MASK;
-#if defined(CONFIG_CLK) || defined(CONFIG_SPL_CLK) struct udevice *dev; struct clk clk; int ret; @@ -79,7 +78,6 @@ int timer_init(void) gd->cpu_clk = clk_get_rate(&clk);
clk_free(&clk); -#endif
gd->arch.timer_rate_hz = (gd->cpu_clk / 2) / (TIMER_PRESCALE + 1);
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 9118e49..2c95188 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -181,9 +181,7 @@ struct zynq_gem_priv { struct phy_device *phydev; int phy_of_handle; struct mii_dev *bus; -#if defined(CONFIG_CLK) || defined(CONFIG_SPL_CLK) struct clk tx_clk; -#endif };
static inline int mdio_wait(struct zynq_gem_regs *regs) @@ -368,9 +366,7 @@ static int zynq_gem_init(struct udevice *dev) u32 i, nwconfig; int ret; unsigned long clk_rate = 0; -#if defined(CONFIG_CLK) || defined(CONFIG_SPL_CLK) unsigned long clk_rate_rounded; -#endif struct zynq_gem_priv *priv = dev_get_priv(dev); struct zynq_gem_regs *regs = priv->iobase; struct emac_bd *dummy_tx_bd = &priv->tx_bd[TX_FREE_DESC]; @@ -473,7 +469,6 @@ static int zynq_gem_init(struct udevice *dev) break; }
-#if defined(CONFIG_CLK) || defined(CONFIG_SPL_CLK) clk_rate_rounded = clk_set_rate(&priv->tx_clk, clk_rate); if (IS_ERR_VALUE(clk_rate_rounded)) { dev_err(dev, "failed to set tx clock rate\n"); @@ -485,10 +480,6 @@ static int zynq_gem_init(struct udevice *dev) dev_err(dev, "failed to enable tx clock\n"); return ret; } -#else - zynq_slcr_gem_clk_setup((ulong)priv->iobase != - ZYNQ_GEM_BASEADDR0, clk_rate); -#endif
setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK | ZYNQ_GEM_NWCTRL_TXEN_MASK); @@ -699,9 +690,7 @@ static int zynq_gem_ofdata_to_platdata(struct udevice *dev) struct eth_pdata *pdata = dev_get_platdata(dev); struct zynq_gem_priv *priv = dev_get_priv(dev); const char *phy_mode; -#if defined(CONFIG_CLK) || defined(CONFIG_SPL_CLK) int ret; -#endif
pdata->iobase = (phys_addr_t)dev_get_addr(dev); priv->iobase = (struct zynq_gem_regs *)pdata->iobase; @@ -723,13 +712,11 @@ static int zynq_gem_ofdata_to_platdata(struct udevice *dev) } priv->interface = pdata->phy_interface;
-#if defined(CONFIG_CLK) || defined(CONFIG_SPL_CLK) ret = clk_get_by_index(dev, 2, &priv->tx_clk); if (ret < 0) { dev_err(dev, "failed to get clock\n"); return ret; } -#endif
printf("ZYNQ GEM: %lx, phyaddr %x, interface %s\n", (ulong)priv->iobase, priv->phyaddr, phy_string_for_interface(priv->interface)); diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c index 4f6e7e4..a2967c0 100644 --- a/drivers/serial/serial_zynq.c +++ b/drivers/serial/serial_zynq.c @@ -15,7 +15,6 @@ #include <asm/io.h> #include <linux/compiler.h> #include <serial.h> -#include <asm/arch/clk.h> #include <asm/arch/hardware.h>
DECLARE_GLOBAL_DATA_PTR; @@ -111,7 +110,6 @@ int zynq_serial_setbrg(struct udevice *dev, int baudrate) struct zynq_uart_priv *priv = dev_get_priv(dev); unsigned long clock;
-#if defined(CONFIG_CLK) || defined(CONFIG_SPL_CLK) int ret; struct clk clk;
@@ -133,9 +131,7 @@ int zynq_serial_setbrg(struct udevice *dev, int baudrate) dev_err(dev, "failed to enable clock\n"); return ret; } -#else - clock = get_uart_clk(0); -#endif + _uart_zynq_serial_setbrg(priv->regs, clock, baudrate);
return 0; diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index 3b0fa29..a1ccc42 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -10,8 +10,6 @@ #ifndef __CONFIG_TOPIC_MIAMI_H #define __CONFIG_TOPIC_MIAMI_H
-#define CONFIG_ZYNQ_PS_CLK_FREQ 33333333UL - #define CONFIG_ZYNQ_I2C0 #define CONFIG_ZYNQ_I2C1
diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h index b9ff391..1488fd8 100644 --- a/include/configs/zynq_zybo.h +++ b/include/configs/zynq_zybo.h @@ -20,9 +20,6 @@ #define CONFIG_DISPLAY #define CONFIG_I2C_EDID
-/* Define ZYBO PS Clock Frequency to 50MHz */ -#define CONFIG_ZYNQ_PS_CLK_FREQ 50000000UL - #include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_ZYBO_H */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 6d614c6..375b9b8 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -8248,7 +8248,6 @@ CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET CONFIG_ZYNQ_HISPD_BROKEN CONFIG_ZYNQ_I2C0 CONFIG_ZYNQ_I2C1 -CONFIG_ZYNQ_PS_CLK_FREQ CONFIG_ZYNQ_SDHCI0 CONFIG_ZYNQ_SDHCI1 CONFIG_ZYNQ_SDHCI_MAX_FREQ