Implement EFI capsule update functionality for PHYTEC K3-based SoMs. These SoMs feature various flash device options, including eMMC, OSPI NOR, and uSD card at the board level.
This update provides the necessary logic to enable EFI capsule updates across all three flash devices, ensuring flexible and robust firmware upgrade capabilities.
The GUID is dynamically generated for the board, to get it:
efidebug capsule esrt ======================================== ESRT: fw_resource_count=3 ESRT: fw_resource_count_max=3 ESRT: fw_resource_version=1 [entry 0]============================== ESRT: fw_class=C7D64D6D-10B2-54BC-A3BF-06A9DC3653D9 ESRT: fw_type=unknown ESRT: fw_version=0 ESRT: lowest_supported_fw_version=0 ESRT: capsule_flags=0 ESRT: last_attempt_version=0 ESRT: last_attempt_status=success [entry 1]============================== ESRT: fw_class=09841C3F-F177-5D57-B1F6-754D92879205 ESRT: fw_type=unknown ESRT: fw_version=0 ESRT: lowest_supported_fw_version=0 ESRT: capsule_flags=0 ESRT: last_attempt_version=0 ESRT: last_attempt_status=success [entry 2]============================== ESRT: fw_class=D11A9016-515E-503A-8872-3FF65384D0C4 ESRT: fw_type=unknown ESRT: fw_version=0 ESRT: lowest_supported_fw_version=0 ESRT: capsule_flags=0 ESRT: last_attempt_version=0 ESRT: last_attempt_status=success ========================================
On the board (from uSD card containing capsule binaries at boot):
load mmc 1:1 $loadaddr tiboot3-capsule.bin efidebug capsule update $loadaddr
load mmc 1:1 $loadaddr tispl-capsule.bin efidebug capsule update $loadaddr
load mmc 1:1 $loadaddr uboot-capsule.bin efidebug capsule update $loadaddr
The binaries will be flashed to the flash device you are booted from.
Signed-off-by: Wadim Egorov w.egorov@phytec.de --- board/phytec/common/k3/board.c | 80 +++++++++++++++++++++++++++++++++ include/configs/phycore_am62x.h | 4 ++ include/configs/phycore_am64x.h | 4 ++ 3 files changed, 88 insertions(+)
diff --git a/board/phytec/common/k3/board.c b/board/phytec/common/k3/board.c index 346b2b6491a..065e446e154 100644 --- a/board/phytec/common/k3/board.c +++ b/board/phytec/common/k3/board.c @@ -4,15 +4,92 @@ * Author: Wadim Egorov w.egorov@phytec.de */
+#include <efi_loader.h> #include <env_internal.h> #include <fdt_support.h> #include <dm/ofnode.h> +#include <mtd.h> #include <spl.h> #include <malloc.h> #include <asm/arch/hardware.h>
#include "../am6_som_detection.h"
+#if IS_ENABLED(CONFIG_EFI_HAVE_CAPSULE_SUPPORT) +struct efi_fw_image fw_images[] = { + { + .fw_name = PHYCORE_AM6XX_FW_NAME_TIBOOT3, + .image_index = 1, + }, + { + .fw_name = PHYCORE_AM6XX_FW_NAME_SPL, + .image_index = 2, + }, + { + .fw_name = PHYCORE_AM6XX_FW_NAME_UBOOT, + .image_index = 3, + } +}; + +struct efi_capsule_update_info update_info = { + .dfu_string = NULL, + .num_images = ARRAY_SIZE(fw_images), + .images = fw_images, +}; + +/** + * configure_capsule_updates() - Set up the DFU string for capsule updates + * + * Configures all three bootloader binaries for updates on the current + * booted flash device, which may be eMMC, OSPI NOR, or a uSD card. If + * booting from USB or Serial, capsule updates will be performed on the + * eMMC device. + * + * Note: Currently, eMMC hardware partitions are not differentiated; Updates + * are always applied to the first boot partition. + */ +void configure_capsule_updates(void) +{ + static char dfu_string[128] = { 0 }; + const char *dfu_raw = "tiboot3.bin raw 0x0 0x400 mmcpart 1;" + "tispl.bin raw 0x400 0x1000 mmcpart 1;" + "u-boot.img.raw raw 0x1400 0x2000 mmcpart 1"; + const char *dfu_fat = "tiboot3.bin fat 1 1;" + "tispl.bin fat 1 1;" + "u-boot.img fat 1 1"; + const char *dfu_spi = "tiboot3.bin part 1;" + "tispl.bin part 2;" + "u-boot.img part 3"; + u32 boot_device = get_boot_device(); + + switch (boot_device) { + case BOOT_DEVICE_MMC1: + snprintf(dfu_string, 128, "mmc 0=%s", dfu_raw); + break; + case BOOT_DEVICE_MMC2: + snprintf(dfu_string, 128, "mmc 1=%s", dfu_fat); + break; + case BOOT_DEVICE_SPI: + mtd_probe_devices(); + snprintf(dfu_string, 128, "mtd nor0=%s", dfu_spi); + break; + default: + snprintf(dfu_string, 128, "mmc 0=%s", dfu_raw); + break; + }; + + update_info.dfu_string = dfu_string; +} +#endif + +#if IS_ENABLED(CONFIG_SET_DFU_ALT_INFO) +void set_dfu_alt_info(char *interface, char *devstr) +{ + if (IS_ENABLED(CONFIG_EFI_HAVE_CAPSULE_SUPPORT)) + env_set("dfu_alt_info", update_info.dfu_string); +} +#endif + #if IS_ENABLED(CONFIG_ENV_IS_IN_FAT) || IS_ENABLED(CONFIG_ENV_IS_IN_MMC) int mmc_get_env_dev(void) { @@ -94,6 +171,9 @@ int board_late_init(void) } }
+ if (IS_ENABLED(CONFIG_EFI_HAVE_CAPSULE_SUPPORT)) + configure_capsule_updates(); + return 0; } #endif diff --git a/include/configs/phycore_am62x.h b/include/configs/phycore_am62x.h index 10b78b6f537..2bc6e7e16f9 100644 --- a/include/configs/phycore_am62x.h +++ b/include/configs/phycore_am62x.h @@ -12,4 +12,8 @@ /* DDR Configuration */ #define CFG_SYS_SDRAM_BASE 0x80000000
+#define PHYCORE_AM6XX_FW_NAME_TIBOOT3 u"PHYCORE_AM62X_TIBOOT3" +#define PHYCORE_AM6XX_FW_NAME_SPL u"PHYCORE_AM62X_SPL" +#define PHYCORE_AM6XX_FW_NAME_UBOOT u"PHYCORE_AM62X_UBOOT" + #endif /* __PHYCORE_AM62X_H */ diff --git a/include/configs/phycore_am64x.h b/include/configs/phycore_am64x.h index 9377db30a91..dd3dfa94270 100644 --- a/include/configs/phycore_am64x.h +++ b/include/configs/phycore_am64x.h @@ -12,4 +12,8 @@ /* DDR Configuration */ #define CFG_SYS_SDRAM_BASE 0x80000000
+#define PHYCORE_AM6XX_FW_NAME_TIBOOT3 u"PHYCORE_AM64X_TIBOOT3" +#define PHYCORE_AM6XX_FW_NAME_SPL u"PHYCORE_AM64X_SPL" +#define PHYCORE_AM6XX_FW_NAME_UBOOT u"PHYCORE_AM64X_UBOOT" + #endif /* __PHYCORE_AM64X_H */