On Thursday, July 23, 2015 at 04:53:48 PM, Stefan Roese wrote:
On 23.07.2015 16:17, Marek Vasut wrote:
On Thursday, July 23, 2015 at 01:02:46 PM, Stefan Roese wrote:
This patch enables the USB EHCI support for the Marvell Armada XP (AXP) SoCs. In compatism to the Armada 38x (A38x), the AXP needs to configure the USB PLL and the USB PHY's specifically in U-Boot. The A38x has done this already in the bin_hdr (SPL U-Boot). Without this, accessing the controller registers in U-Boot or Linux will hang the CPU.
Additionally, the AXP uses a different USB EHCI base address. This patch also takes care of this by runtime SoC detection in the Marvell EHCI driver.
[...]
diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c index 03c489c..826e7f7 100644 --- a/drivers/usb/host/ehci-marvell.c +++ b/drivers/usb/host/ehci-marvell.c @@ -33,7 +33,14 @@ DECLARE_GLOBAL_DATA_PTR;
*/
#ifdef CONFIG_ARMADA_XP
-#define MVUSB0_BASE MVEBU_USB20_BASE +/*
- Armada XP and Armada 38x have different base addresses for
- the USB 2.0 EHCI host controller. So we need to provide
- a mechnism to support both here.
mechanism (I can fix that myself)
- */
+#define MVUSB0_BASE \
(mvebu_soc_family() == MVEBU_SOC_A38X ? \
MVEBU_USB20_BASE : MVEBU_AXP_USB_BASE)/*
- Once all the older Marvell SoC's (Orion, Kirkwood) are converted
Do you want me to pick this via USB tree ?
If you have no objections, then it would be easer if Luka pushes all patches together. Since there might be conflicts in the arch/arm/ files otherwise.
OK!
Best regards, Marek Vasut