On Wed, 2015-08-12 at 13:43 -0500, Andrew Ruder wrote:
Cc: Marek Vasut marex@denx.de Cc: Heiko Schocher hs@denx.de Signed-off-by: Andrew Ruder andrew.ruder@elecsyscorp.com
This driver was written before the driver model stuff was really around (or at least based on a U-Boot version that only had very preliminary support) so there might be some older conventions in use here. I have tested on a PXA270 board running upstream master with this driver, however - so to some extent this all still works fine. Let me know if things need to change to be accepted, and I'll try to find some time to update!
Apart from the missing commit message.
Signed-off-by: Marcel Ziswiler marcel@ziswiler.com
Tested-by: Marcel Ziswiler marcel@ziswiler.com Tested-on: Colibri PXA270 V1.2C, V1.2D, V2.2B, V2.4A on Colibri Evaluation Board V3.1A Note: While power I2C works on the older V1.2C version it does not seem to work on any of the newer ones but this might just be a pin muxing resp. missing pull up issue.