Hi,
On 19/07/17 17:58, Andreas Färber wrote:
Hi,
Am 19.07.2017 um 18:50 schrieb Andre Przywara:
On 19/07/17 17:37, Kostya Porotchkin wrote:
I probably have to build and try the SATA image as the next step.
Yeah, that was my plan for tonight as well, since this would allow me to experiment safely with the generated image.
Oh, BTW: Chain-loading mainline U-Boot worked quite nicely and I could launch the generic debian-testing installer via EFI boot. The only issue was that I was using the U-Boot DT directly, which isn't enough for the kernel (missing clocks and interrupts). I will try to send some patches to bring the U-Boot DT in sync with the kernel one. If this is in place, one could simply attach some (UEFI enabled) USB pen drive and it should start without further ado (given a newer U-Boot in the SPI flash with EFI support).
Which devices have you successfully enumerated on mainline U-Boot? Does SATA work for you? I had reported an endless reset on another board. USB was not quite working either last time I tried on the other board - either the initial scan or a reset had similar symptoms to SATA.
I was using USB (2.0), that worked with origin/master. I haven't tested SATA yet, but will try tonight and let you know.
Cheers, Andre.