These boards have not been converted to generic board by the deadline. Remove them.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/arm/mach-at91/Kconfig | 5 - board/taskit/stamp9g20/Kconfig | 12 -- board/taskit/stamp9g20/MAINTAINERS | 7 -- board/taskit/stamp9g20/Makefile | 17 --- board/taskit/stamp9g20/led.c | 122 ------------------- board/taskit/stamp9g20/stamp9g20.c | 159 ------------------------ configs/portuxg20_defconfig | 10 -- configs/stamp9g20_defconfig | 11 -- include/configs/stamp9g20.h | 244 ------------------------------------- 9 files changed, 587 deletions(-) delete mode 100644 board/taskit/stamp9g20/Kconfig delete mode 100644 board/taskit/stamp9g20/MAINTAINERS delete mode 100644 board/taskit/stamp9g20/Makefile delete mode 100644 board/taskit/stamp9g20/led.c delete mode 100644 board/taskit/stamp9g20/stamp9g20.c delete mode 100644 configs/portuxg20_defconfig delete mode 100644 configs/stamp9g20_defconfig delete mode 100644 include/configs/stamp9g20.h
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index f70ccbc..ba1b4f4 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -43,10 +43,6 @@ config TARGET_PM9263 bool "Ronetix pm9263 board" select CPU_ARM926EJS
-config TARGET_STAMP9G20 - bool "Support stamp9g20" - select CPU_ARM926EJS - config TARGET_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK board" select CPU_ARM926EJS @@ -142,6 +138,5 @@ source "board/ronetix/pm9g45/Kconfig" source "board/siemens/corvus/Kconfig" source "board/siemens/taurus/Kconfig" source "board/siemens/smartweb/Kconfig" -source "board/taskit/stamp9g20/Kconfig"
endif diff --git a/board/taskit/stamp9g20/Kconfig b/board/taskit/stamp9g20/Kconfig deleted file mode 100644 index 1121dac..0000000 --- a/board/taskit/stamp9g20/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_STAMP9G20 - -config SYS_BOARD - default "stamp9g20" - -config SYS_VENDOR - default "taskit" - -config SYS_CONFIG_NAME - default "stamp9g20" - -endif diff --git a/board/taskit/stamp9g20/MAINTAINERS b/board/taskit/stamp9g20/MAINTAINERS deleted file mode 100644 index a91c196..0000000 --- a/board/taskit/stamp9g20/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -STAMP9G20 BOARD -M: Markus Hubig mhubig@imko.de -S: Maintained -F: board/taskit/stamp9g20/ -F: include/configs/stamp9g20.h -F: configs/portuxg20_defconfig -F: configs/stamp9g20_defconfig diff --git a/board/taskit/stamp9g20/Makefile b/board/taskit/stamp9g20/Makefile deleted file mode 100644 index d015e0f..0000000 --- a/board/taskit/stamp9g20/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Stelian Pop stelian@popies.net -# Lead Tech Design <www.leadtechdesign.com> -# -# (C) Copyright 2012 -# Markus Hubig mhubig@imko.de -# IMKO GmbH <www.imko.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += stamp9g20.o -obj-y += led.o diff --git a/board/taskit/stamp9g20/led.c b/board/taskit/stamp9g20/led.c deleted file mode 100644 index c583125..0000000 --- a/board/taskit/stamp9g20/led.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Copyright (c) 2009 Wind River Systems, Inc. - * Tom Rix Tom.Rix@windriver.com - * (C) Copyright 2009 - * Eric Benard eric@eukrea.com - * - * (C) Copyright 2012 - * Markus Hubig mhubig@imko.de - * IMKO GmbH <www.imko.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91_pmc.h> -#include <status_led.h> - -static unsigned int saved_state[3] = {STATUS_LED_OFF, - STATUS_LED_OFF, STATUS_LED_OFF}; - -void coloured_LED_init(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable the clock */ - writel(ATMEL_ID_PIOC, &pmc->pcer); - - at91_set_gpio_output(CONFIG_RED_LED, 1); - at91_set_gpio_output(CONFIG_GREEN_LED, 1); - at91_set_gpio_output(CONFIG_YELLOW_LED, 1); - - at91_set_gpio_value(CONFIG_RED_LED, 0); - at91_set_gpio_value(CONFIG_GREEN_LED, 1); - at91_set_gpio_value(CONFIG_YELLOW_LED, 0); -} - -void red_led_on(void) -{ - at91_set_gpio_value(CONFIG_RED_LED, 1); - saved_state[STATUS_LED_RED] = STATUS_LED_ON; -} - -void red_led_off(void) -{ - at91_set_gpio_value(CONFIG_RED_LED, 0); - saved_state[STATUS_LED_RED] = STATUS_LED_OFF; -} - -void green_led_on(void) -{ - at91_set_gpio_value(CONFIG_GREEN_LED, 1); - saved_state[STATUS_LED_GREEN] = STATUS_LED_ON; -} - -void green_led_off(void) -{ - at91_set_gpio_value(CONFIG_GREEN_LED, 0); - saved_state[STATUS_LED_GREEN] = STATUS_LED_OFF; -} - -void yellow_led_on(void) -{ - at91_set_gpio_value(CONFIG_YELLOW_LED, 1); - saved_state[STATUS_LED_YELLOW] = STATUS_LED_ON; -} - -void yellow_led_off(void) -{ - at91_set_gpio_value(CONFIG_YELLOW_LED, 0); - saved_state[STATUS_LED_YELLOW] = STATUS_LED_OFF; -} - -void __led_init(led_id_t mask, int state) -{ - __led_set(mask, state); -} - -void __led_toggle(led_id_t mask) -{ - if (STATUS_LED_RED == mask) { - if (STATUS_LED_ON == saved_state[STATUS_LED_RED]) - red_led_off(); - else - red_led_on(); - - } else if (STATUS_LED_GREEN == mask) { - if (STATUS_LED_ON == saved_state[STATUS_LED_GREEN]) - green_led_off(); - else - green_led_on(); - - } else if (STATUS_LED_YELLOW == mask) { - if (STATUS_LED_ON == saved_state[STATUS_LED_YELLOW]) - yellow_led_off(); - else - yellow_led_on(); - } -} - -void __led_set(led_id_t mask, int state) -{ - if (STATUS_LED_RED == mask) { - if (STATUS_LED_ON == state) - red_led_on(); - else - red_led_off(); - - } else if (STATUS_LED_GREEN == mask) { - if (STATUS_LED_ON == state) - green_led_on(); - else - green_led_off(); - - } else if (STATUS_LED_YELLOW == mask) { - if (STATUS_LED_ON == state) - yellow_led_on(); - else - yellow_led_off(); - } -} diff --git a/board/taskit/stamp9g20/stamp9g20.c b/board/taskit/stamp9g20/stamp9g20.c deleted file mode 100644 index 27cdf77..0000000 --- a/board/taskit/stamp9g20/stamp9g20.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop stelian@popies.net - * Lead Tech Design <www.leadtechdesign.com> - * - * Achim Ehrlich aehrlich@taskit.de - * taskit GmbH <www.taskit.de> - * - * (C) Copyright 2012- - * Markus Hubig mhubig@imko.de - * IMKO GmbH <www.imko.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/at91sam9260_matrix.h> -#include <asm/arch/at91sam9_smc.h> -#include <asm/arch/at91_common.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/gpio.h> -#include <watchdog.h> - -#ifdef CONFIG_MACB -# include <net.h> -# include <netdev.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -static void stamp9G20_nand_hw_init(void) -{ - struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; - struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; - unsigned long csa; - - /* Assign CS3 to NAND/SmartMedia Interface */ - csa = readl(&matrix->ebicsa); - csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA; - writel(csa, &matrix->ebicsa); - - /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), - &smc->cs[3].setup); - writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), - &smc->cs[3].pulse); - writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | - AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(2), - &smc->cs[3].mode); - - /* Configure RDY/BSY */ - at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); - - /* Enable NandFlash */ - at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} - -#ifdef CONFIG_MACB -static void stamp9G20_macb_hw_init(void) -{ - struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA; - - /* Enable the PHY Chip via PA26 on the Stamp 2 Adaptor */ - at91_set_gpio_output(AT91_PIN_PA26, 0); - - /* - * Disable pull-up on: - * RXDV (PA17) => PHY normal mode (not Test mode) - * ERX0 (PA14) => PHY ADDR0 - * ERX1 (PA15) => PHY ADDR1 - * ERX2 (PA25) => PHY ADDR2 - * ERX3 (PA26) => PHY ADDR3 - * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 - * - * PHY has internal pull-down - */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA17) | - pin_to_mask(AT91_PIN_PA18) | - pin_to_mask(AT91_PIN_PA28), - &pioa->pudr); - - at91_phy_reset(); - - /* Re-enable pull-up */ - writel(pin_to_mask(AT91_PIN_PA14) | - pin_to_mask(AT91_PIN_PA15) | - pin_to_mask(AT91_PIN_PA17) | - pin_to_mask(AT91_PIN_PA18) | - pin_to_mask(AT91_PIN_PA28), - &pioa->puer); - - /* Initialize EMAC=MACB hardware */ - at91_macb_hw_init(); -} -#endif /* CONFIG_MACB */ - -int board_early_init_f(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clocks for all PIOs */ - writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOC), &pmc->pcer); - - return 0; -} - -int board_postclk_init(void) -{ - /* - * Initialize the serial interface here, because be need a running - * timer to set PC9 to high and wait for some time to enable the - * level converter of the RS232 interface on the PortuxG20 board. - */ - -#ifdef CONFIG_PORTUXG20 - at91_set_gpio_output(AT91_PIN_PC9, 1); - mdelay(1); -#endif - at91_seriald_hw_init(); - - return 0; -} - -int board_init(void) -{ - /* Adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - stamp9G20_nand_hw_init(); -#ifdef CONFIG_MACB - stamp9G20_macb_hw_init(); -#endif - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size( - (void *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -#ifdef CONFIG_MACB -int board_eth_init(bd_t *bis) -{ - return macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00); -} -#endif /* CONFIG_MACB */ diff --git a/configs/portuxg20_defconfig b/configs/portuxg20_defconfig deleted file mode 100644 index 1e8344f..0000000 --- a/configs/portuxg20_defconfig +++ /dev/null @@ -1,10 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_STAMP9G20=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,PORTUXG20" -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/stamp9g20_defconfig b/configs/stamp9g20_defconfig deleted file mode 100644 index 40d6232..0000000 --- a/configs/stamp9g20_defconfig +++ /dev/null @@ -1,11 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_STAMP9G20=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20" -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/include/configs/stamp9g20.h b/include/configs/stamp9g20.h deleted file mode 100644 index 87df70b..0000000 --- a/include/configs/stamp9g20.h +++ /dev/null @@ -1,244 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop stelian@popies.net - * Lead Tech Design <www.leadtechdesign.com> - * - * (C) Copyright 2010 - * Achim Ehrlich aehrlich@taskit.de - * taskit GmbH <www.taskit.de> - * - * (C) Copyright 2012 - * Markus Hubig mhubig@imko.de - * IMKO GmbH <www.imko.de> - * - * Configuation settings for the stamp9g20 CPU module. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * SoC must be defined first, before hardware.h is included. - * In this case SoC is defined in boards.cfg. - */ -#include <asm/hardware.h> - -/* - * Warning: changing CONFIG_SYS_TEXT_BASE requires adapting the initial boot - * program. Since the linker has to swallow that define, we must use a pure - * hex number here! - */ -#define CONFIG_SYS_TEXT_BASE 0x23f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */ - -/* misc settings */ -#define CONFIG_CMDLINE_TAG /* pass commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS /* pass memory defs to kernel */ -#define CONFIG_INITRD_TAG /* pass initrd param to kernel */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */ -#define CONFIG_BOARD_EARLY_INIT_f /* call board_early_init_f() */ -#define CONFIG_BOARD_POSTCLK_INIT /* call board_postclk_init() */ -#define CONFIG_DISPLAY_CPUINFO /* display CPU Info at startup */ - -/* setting board specific options */ -#ifdef CONFIG_PORTUXG20 -# define CONFIG_MACH_TYPE MACH_TYPE_PORTUXG20 -# define CONFIG_MACB -#else -# define CONFIG_MACH_TYPE MACH_TYPE_STAMP9G20 -#endif - -/* - * SDRAM: 1 bank, 64 MB, base address 0x20000000 - * Already initialized before u-boot gets started. - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1 -#define CONFIG_SYS_SDRAM_SIZE (64 << 20) - -/* - * Perform a SDRAM Memtest from the start of SDRAM - * till the beginning of the U-Boot position in RAM. - */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000) - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + (128 << 10), 0x1000) - -/* - * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, - * leaving the correct space for initial global data structure above that - * address while providing maximum stack area below. - */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) - -/* NAND flash settings */ -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 -#define CONFIG_SYS_NAND_DBW_8 -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 -#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 - -/* general purpose I/O */ -#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ -#define CONFIG_AT91_GPIO /* enable the GPIO features */ -#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ - -/* serial console */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#define CONFIG_BAUDRATE 115200 - -/* LED configuration */ -#define CONFIG_STATUS_LED -#define CONFIG_BOARD_SPECIFIC_LED - -/* The LED PINs */ -#define CONFIG_RED_LED AT91_PIN_PC5 -#define CONFIG_GREEN_LED AT91_PIN_PC4 -#define CONFIG_YELLOW_LED AT91_PIN_PC10 - -#define STATUS_LED_RED 0 -#define STATUS_LED_GREEN 1 -#define STATUS_LED_YELLOW 2 - -/* Red LED */ -#define STATUS_LED_BIT STATUS_LED_RED -#define STATUS_LED_STATE STATUS_LED_OFF -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) - -/* Green LED */ -#define STATUS_LED_BIT1 STATUS_LED_GREEN -#define STATUS_LED_STATE1 STATUS_LED_ON -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) - -/* Yellow LED */ -#define STATUS_LED_BIT2 STATUS_LED_YELLOW -#define STATUS_LED_STATE2 STATUS_LED_OFF -#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) - -/* Boot status LED */ -#define STATUS_LED_BOOT STATUS_LED_GREEN - -/* - * Ethernet configuration - * - * PortuxG20 has always ethernet but for Stamp9G20 you - * can enable it here if your baseboard features ethernet. - */ - -#define CONFIG_MACB -#define CONFIG_USB_HOST_ETHER -#define CONFIG_USB_ETHER_ASIX -#define CONFIG_USB_ETHER_MCS7830 - -#ifdef CONFIG_MACB -# define CONFIG_RMII /* use reduced MII inteface */ -# define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */ -#define CONFIG_AT91_WANTS_COMMON_PHY - -/* BOOTP and DHCP options */ -# define CONFIG_BOOTP_BOOTFILESIZE -# define CONFIG_BOOTP_BOOTPATH -# define CONFIG_BOOTP_GATEWAY -# define CONFIG_BOOTP_HOSTNAME -# define CONFIG_NFSBOOTCOMMAND \ - "setenv autoload yes; setenv autoboot yes; " \ - "setenv bootargs ${basicargs} ${mtdparts} " \ - "root=/dev/nfs ip=dhcp nfsroot=${serverip}:/srv/nfs/rootfs; " \ - "dhcp" -#endif /* CONFIG_MACB */ - -/* Enable the watchdog */ -#define CONFIG_AT91SAM9_WATCHDOG -#define CONFIG_HW_WATCHDOG - -/* USB configuration */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 - -/* General Boot Parameter */ -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND "run flashboot" -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING - -/* - * RAM Memory address where to put the - * Linux Kernel befor starting. - */ -#define CONFIG_SYS_LOAD_ADDR 0x22000000 - -/* - * The NAND Flash partitions: - * ========================================== - * 0x0000000-0x001ffff -> 128k, bootstrap - * 0x0020000-0x005ffff -> 256k, u-boot - * 0x0060000-0x007ffff -> 128k, env1 - * 0x0080000-0x009ffff -> 128k, env2 (backup) - * 0x0100000-0x06fffff -> 6M, kernel - * 0x0700000-0x8000000 -> 121M, RootFS - */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET ((128 + 256) << 10) -#define CONFIG_ENV_OFFSET_REDUND ((128 + 256 + 128) << 10) -#define CONFIG_ENV_SIZE (128 << 10) - -/* - * Predefined environment variables. - * Usefull to define some easy to use boot commands. - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - \ - "basicargs=console=ttyS0,115200\0" \ - \ - "mtdparts=mtdparts=atmel_nand:128k(bootstrap)ro," \ - "256k(uboot)ro,128k(env1)ro," \ - "128k(env2)ro,6M(linux),-(root)rw\0" \ - \ - "flashboot=setenv bootargs ${basicargs} ${mtdparts} " \ - "root=/dev/mtdblock5 rootfstype=jffs2; " \ - "nand read 0x22000000 0x100000 0x600000; " \ - "bootm 22000000\0" \ - \ - "sdboot=setenv bootargs ${basicargs} ${mtdparts} " \ - "root=/dev/mmcblk0p1 rootwait; " \ - "nand read 0x22000000 0x100000 0x600000; " \ - "bootm 22000000" - -/* Command line & features configuration */ -#define CONFIG_CMD_NAND -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT -#define CONFIG_CMD_LED - -#ifdef CONFIG_MACB -# define CONFIG_CMD_PING -# define CONFIG_CMD_DHCP -#endif /* CONFIG_MACB */ - -#endif /* __CONFIG_H */