Current usage information is not read friendly specially when all the options are selected. This series fix some of the issues in the info, aligment and overlapping issues, excess of verbosity on the loads...
Additionally Xilinx exclusive command dependencies are included to remove text stating Xilinx Only
The output looks like this now:
fpga - loadable FPGA image support
Usage: fpga info [dev] List known device information fpga dump <dev> <address> <size> Load device to memory buffer fpga load <dev> <address> <size> Load device from memory buffer fpga loadb <dev> <address> <size> Load device from bitstream buffer fpga loadp <dev> <address> <size> Load device from memory buffer with partial bitstream fpga loadbp <dev> <address> <size> Load device from bitstream buffer with partial bitstream fpga loadfs <dev> <address> <size> <blocksize> <interface> [<dev[:part]>] <filename> Load device from filesystem (FAT by default) fpga loadmk <dev> <address> Load device generated with mkimage NOTE: loadmk operating on FIT must include subimage unit name in the form of addr:<subimg_uname> fpga loads <dev> <address> <size> <authflag> <encflag> [Userkey address] Load device from memory buffer with secure bistream (authenticated/encrypted/both) -authflag: 0 for OCM, 1 for DDR, 2 for no authentication (specifies where to perform authentication) -encflag: 0 for device key, 1 for user key, 2 for no encryption -Userkey address: address where user key is stored NOTE: secure bitstream has to be created using Xilinx bootgen tool
Changes in v2: - Tabs replaced by spaces - fpga command added on each option similar to other commands like sf - Dependencies to Xilinx only commands added in Kconfig
Ibai Erkiaga (3): fpga: fix alignment on fpga cmd usage info fpga: improve loads usage information fpga: xilinx exclusive commands info
cmd/Kconfig | 32 +++++++++++++++++++------------ cmd/fpga.c | 55 +++++++++++++++++++++-------------------------------- 2 files changed, 42 insertions(+), 45 deletions(-)